MCT-427 is a fully supervised wireless
heat and photoelectric smoke detector
that is compatible with PowerMax®
home security systems and other
Visonic PowerCode™ wireless receivers.
By sensing rapid temperature changes
in areas where they may occur, such as
kitchens or attics, MCT-427 activates an
alarm when temperatures reach 50°C
(122°F) and start increasing rapidly.
MCT-427
Supervised Wireless
PowerCode™ Smoke
and Heat Detector
Features & Benets:
•Provides early warning of a developing
rewhentemperaturesreach50°C
(122°F) and start increasing rapidly
•Loud (85db) alarm sound at 3m (10ft)
•Up to 5 or 8 years battery life
(depending on the battery type) and
easy battery replacement
•Sound and transmitted alerts (smoke,
tamper, low battery)
•Audio and visual sensitivity degradation
indicators notify when the sensor needs
to be cleaned
•Back tamper
•Fullycertiedbythemoststrictand
demanding international standards
such as EN 14604 for safety products in
Europe
Specications:
Cover Range: 50 – 100 cubic meters
(1770 – 3530 cubic ft.)
Battery type: 3V CR123A / CR17450 lithium
Battery Life
(in typical use):
5 years for CR123A,
8 years for CR17450
Weight: 165g (5.8oz)
Operating
temperature:
-10°C to 50°C (14°F to 122°F)
Operating
environment:
Indoor
Dimensions: 120 x 63mm (4.7 X 2.5in)
and PowerMax are registered trademarks of Visonic Ltd. Other names are the property of their owners.
Visonic reserves the right to change information or specications without notice
