Vissani MVWC18BF User manual

18 BOTTLE THERMOELECTRIC WINE COOLER
INSTRUCTION MANUAL
Model No.: MVWC18BF
To ensure proper use of this appliance and your safety, please read the
following instructions completely before operating this appliance.

EN
Product Registration Copy
Thank you for purchasing a Vissani product. The first step in protecting your
new product is to complete the product registration form on our website at
www.mcappliance.com/register .The benefits of registering your product
include the following.
1. Registering your product will allow us to contact you regarding a safety
notification or product update.
2. In the event that warranty service is required, registering your product will allow
for more efficient warranty service processing.
3. In the event of an insurance loss registering your product could act as your proof
of purchase.
Once again thank you for purchasing a Vissani product.

EN
1
TABLE OF CONTENTS
NAMES OF THE PARTS……………………………………………………… 2
IMPORTANT SAFETY INSTRUCTIONS……………………………………. 3
INSTALLATION INSTRUCTIONS
BEFORE USING YOUR WINE COOLER……………………..…… 3
INSTALLING YOUR WINE COOLER ……………………………… 3
ELECTRICAL CONNECTION………………………………………… 4
OPERATING YOUR WINE COOLER
TEMPERATURE CONTROL………………………………………….. 5
CARE AND MAINTENANCE
CLEANING YOUR WINE COOLER………………………………… 6
VACATION TIME………………………………………………………. 6
MOVING YOUR WINE COOLER…………………………………… 6
ENERGY SAVING TIPS………………………………………………. 6
TROUBLESHOOTING GUIDE………………………………………………. 7-8
WINE COOLER WARRANTY……………………….……………………… 9

EN
2
NAMES OF THE PARTS
MODEL NO. MVWC18BF
1.
RECESSED HANDLE
2. LEVELING LEGS
3. TEMPERATURE CONTROL PANEL
4. LIGHT
5. HINGE
6. RACKS
1
2
3 4 5
6

EN
3
IMPORTANT SAFETY INSTRUCTIONS
aWARNINGa
To reduce the risk of fire, electrical shock,
or injury when using your wine cooler,
follow these basic precautions:
xRead all instructions before using the wine cooler.
xNever clean wine cooler parts with flammable fluids. The fumes can create a fire
hazard or explosion.
xDo not store or use gasoline or any other flammable vapors and liquids in the vicinity
of this or any other wine cooler. The fumes can create a fire hazard or an explosion.
-Save these instructions-
INSTALLATION INSTRUCTIONS
Before Using Your Wine cooler
xRemove the exterior and interior packing.
xClean the interior surface with lukewarm water using a soft cloth. (Cleaning instruction on page 6)
Installing Your Wine cooler
xThis appliance is designed to be free standing only, and should not be recessed or built-in.
xAllow 5 inches of space between the back and sides of the wine cooler, which allows the proper
air ventilation. Adjust the legs to keep the wine cooler level.
xLocate the wine cooler away from direct sunlight and sources of heat (stove, heater, radiator, etc.).
Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. If the ambient temperature is higher than 80°F or lower than 55°F it will hinder the
performance of this appliance. This unit is not designed for use in a garage or any other
outside installation.
xAvoid locating the wine cooler in moist areas.
xPlug the wine cooler into dedicated, properly installed-grounded wall outlet. Do not under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a certified electrician or an
authorized service center. This unit is not designed to be installed in an RV or used with an
inverter.
xAfter plugging the appliance into a wall outlet, allow the unit to cool down for 3 ~ 4 hours under
before placing wine bottles in the wine cooler.