Vista TV14E Operation instructions

USER OPERATING MANUAL
Colour Monitor
Please read this Instruction book before using your Colour Monitor set.
TV14E
TV21E
F
F

2
MINIMUM DISTANCES
10cm
5cm
20cm
10cm
!
SAFETY PRECA
SAFETY PRECAUTIONS UTIONS
Do not allow anything to rest on the power
cord
Do not locate this colour monitor where the
cord will be damaged by people walking on it.
Do not overload wall outlets and extension
cords as this can result in fire or electric shock.
Slots and openings in the cabinet and in the
back or bottom are provided for ventilation
to ensure reliable operation and to protect it
from overheating.These openings must not
be blocked or covered.
The opening should never be covered with
a cloth or other material, and the bottom
openings should not be blocked by placing
the television receiver on a bed, sofa, rug,
or other similar surface.
This colour monitor should never be placed
near or over a radiator or heater.This colour
monitor should not be placed in a built-in
installation such as a bookcase unless
proper ventilation is provided
Do not place your colour monitor on an
unstable stand, shelf or table.
Serious injury to an individual, and damage to
the monitor may result if it should fall.
Your sales person can recommend approved
stands or shelf and wall mounting instructions.
If the monitor is to be built into a compartment
or similarly enclosed, the minimum distances
must be maintained. Heat build-up can
reduce the service life of your television, and
can also be dangerous.
This colour monitor should be operated only
from the type of power source indicated on
the monitor or as indicated in the Operating
Instructions. If you are not sure of the type
of power supply in your home, consult your
sales person or your local power company.
Never add accessories that have not been
specifically designed for this monitor.
Do not drop or push objects into the
monitor cabinet slots or openings. Some
internal parts carry hazardous voltages
and contact may result in an electric shock
hazard. Never spill liquids of any kind on
the colour monitor. Do not place items
such as vases containing liquid on top of
the monitor.
Do not expose the colour monitor to rain
or use near water. For example, near a
bathtub, kitchen sink, in a wet basement,
etc. Before cleaning, unplug the colour
monitor from the wall socket.
Never stand on, lean on or push the
monitor or its stand. Never allow children to
play with the monitor or its stand.Serious
injury may result if it should fall.
Do not apply liquid cleaners or aerosol
cleaners directly onto the colour monitor.
Use a damp cloth for cleaning.
Do not place candles or hot objects upon
the monitor, next to it or behind it. Open
flames must never be used near the
monitor.
!!
MINIMUM DISTANCES
10cm
5cm
20cm
10cm
CAUTION: Please read and retain for your safety.
This colour Monitor has been engineered and manufactured to assure your personal safety. But improper use can result in potential electric
shock or fire hazards. In order not to defeat the safeguards incorporated in this receiver observe the following basic rules for its installation, use
and servicing.
Installation Use
Important:
This equipment is fitted with an approved non rewireable UK mains plug.To change a fuse in this type of plug proceed as follows:
1. Remove the fuse cover and fuse.
2. Fit a new fuse which should be a BS1362 5Amp A.S.T.A. or BSI approved type.
3. Ensure that the fuse cover is correctly refitted.
If the fuse cover is lost or damaged the plug must NOT be used but replaced with a serviceable plug.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a
fuse, this should have a rating of 5 Amp, ensure the fuse cover is correctly fitted. If a plug without a fuse is used, the fuse at the distribution board
should not be greater than 5 Amp.
Note: The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13Amp socket elsewhere.
The wires in this mains lead are coloured in accordance with the following code:
Blue -------> Neutral
Brown ----> Live
1. The Blue wire must be connected to the terminal whichis marked with the letter “N” or coloured BLACK.
2. The Brown wire must be connected to the terminal with the letter “L” or coloured RED.
3. Do not connect either wire to the earth terminal in the symbol or coloured GREEN or GREEN and YELLOW.
Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the wires.

3
INST
INSTALLA ALLATION / GENERAL OPERA TION / GENERAL OPERATION TION
Connect the power cord of the monitor to a wall outlet.
✐ The monitor is prepared for a mains voltage AC220~240V, 50Hz.
When the monitor is not to be used for an extended period of
time, it is advisable to disconnect the power cord from the power
outlet.
■To turn the monitor ON, press the Mains ON/OFF switch.The
power indicator illuminates to show the power is on.
■ To turn the monitor OFF, press the Mains ON/OFF switch
again.
Press the button repeatedly to select Volume, Brightness,
Contrast, Colour, Sharpness. Press the or button to adjust
the selected control.When the control menu is not displayed, the
or button enable you to switch programme position.
Volume : To adjust the sound volume.
Brightness : To adjust the picture brightness.
Contrast : To adjust the picture contrast.
Colour : To adjust the picture colour.
Sharpness : To adjust the picture sharpness.
Tint : To adjust the colour phase. (This appears when NTSC
signals are input.)
F
VIDEO IN
AUDIO OUT AUDIO IN VIDEO OUT
AC Mains Outlet
F
Mains Supply Switching-on your TV
Control selection and adjustment
WARNING
High voltages are used in the operation of this set.
Refer to qualified service personnel
AV Connection
Terminal Description
VIDEO IN BNC connector for video in.
VIDEO OUT BNC connector for video out.
AUDIO IN BNC connector for audio in.
AUDIO OUT BNC connector for audio out.
F
-/+ Button levels
up and down
Function key
Mains On / Off
switch
Standby light
Remote sensor
!
If you find the power indicator flashing, please turn the
monitor off completely with the Mains ON/OFF
button and contact our service desk.
This warning is a sign to let you know that the power
protection function of this monitor is now operating.
Be sure to set the Mains On/Off button to the OFF
position if a power failure occurs.
Volume 12 Brightness 12
Contrast 12
Colour 12
Sharpness 12

TV SPECIFICA
TV SPECIFICATIONS TIONS
Part No. SKP10349-A C3MV/C3LV Printed in U.K.
Monitor specification
Power source AC 220~240V 50Hz
Colour system PAL,NTSC4.43, (NTSC3.58 AV IN)
Input terminals
Video IN BNC connector
Audio IN RCA connector
Output terminals
Video OUT BNC connector
Audio OUT RCA connector
TV14E TV21E
Sound output
(continuous)(watts) 1.5 1.5
Picture tube
(Diagonal) (cm) 37 55
(Visible picture diagonal) 34 51
Dimensions
(W x H x D mm) 370 x 336.5 x 379 514 x 466 x 482
Weight (kg) 9.0 19.0
TV specification