Vitea Care Bubble Master User manual

1
Use’r manual
Edition MG 10.2015
Bubble Master
Anti-bedsore alternating pressure bubble mattress
VCM202G

2
Table of Contents
1. Introduction..................................................................................................................................... 3
2. Description of product..................................................................................................................... 3
4. Contrandications.............................................................................................................................. 4
5. Use................................................................................................................................................... 4
6. Safety of use.................................................................................................................................... 7
7. Everyday use and maintenance ....................................................................................................... 7
8. Technical parametres....................................................................................................................... 9
9. Symbols........................................................................................................................................... 9
10. Contact details........................................................................................................................... 10
PLEASE READ CAREFULLY BEFORE USING WHOLE OF INSTRUCTIONS

3
1. Introduction
Alternating pressure anti-bedsore bubble mattress is equipped with end flaps which allows to place
the mattress on the bed. Made of PVC, which is a important to keep it clean. Manual adjustment of the
pressure in the mattress gives the possibility of individual adjustment to the patient's weight with a
weight up till 140 kg.
2. Description of product
Illustration 1.
1. Mattress belt
2. Mattress tubes
3. Pump
4. End laps
Elements that should be inside the packaging:
Illustration 2. Pump
Illustration 3. Connecting element.
1
4
2
3

4
Illustration 4. Mattress
Illustration 5. Mattress cord
3. Use
Prevention and support of bedsore treatment. Due to its tubular structure, the mattress ensures an
appropriate arrangement of body weight and correct ventilation (oxygenation and moisture diversion).
The air insulation provides an optimal temperature and comfort of use. All of the above-mentioned
factors play crucial role for bedsore prophylaxis and treatment. The variable pressure mattresses do not
eliminate all causes of bedsores but due to changing position of body support points, they reduce the
risk of bedsores formation and development.
4. Contrandications
In case of adverse skin changes you should immediately consult a physician or medical personnel.
5. Use
After unpacking, check if it contains all parts in accordance with elements above.
Ensure that all components have no visible damage. If any doubts, please contact the
manufacturer.
The mattress should be placed on the bed in such a way that the pump is located on the side
with a patient's feet.
Then hang the pump with its hooks on the bed railings or place on a horizontal surface.
Push the tubes of the mattress to the mattress tabs. (Illustration 6)

5
Illustration 6.
Connect tube into the mattress and then to the pump via a connecting part.
To do this, press indicated in illustration 7 for a place to disconnect the connecting element
into the position shown in Illustration 8.
Illustration 7. Illustration 8.
Connecting element should be fixed into pump jack (Illustration 9).
Then connect the mattress wires into the connecting element by pressing them into the tabs
inside. (Illustration 10., 11)
Illustration 9. Illustration 10.
Socket
The mattress tabs

6
Illustration 11. Illustration 12.
Plug the power cord into a power outlet.
Make sure that the mattress tubes are not bent or twisted.
Start the pump by using green button. Position 1 (on) - the pump is switched on. Position 0
(off) - pump is switched off.
Using the knob, set the maximum level of mattress inflation.
FIRM - is the degree of mattress inflation, the mattress can be described as hard.
SOFT - is the degree of mattress inflation, the mattress can be described as soft.
Illustration 13.
Low pressure warning lamp lights up when inside the mattress is low pressure, i.e. during the
pumping process.
Normal pressure lamp lights up when inside the mattress is pressure in accordance with
parameters set on the pump.
After about 30 minutes, when the mattress is already inflated, place mattress end laps under
the mattress of your bed.
Put sheet on the mattress.
Now the patient can lay on the mattress.
Using the knob, set the desired degree of mattress inflation for patient comfort .
Knob with indicator
Switch on / switch off
Low pressure warning light
Lamp normal pressure light

7
6. Safety of use
WARNING!
a) Before using the mattress, refer to this manual and keep it for future reference.
b) Permitted user weight 140 kg.
c) Please remember that on the mattress should stay only the patient (other people on the
mattress are not allowed).
d) You are not allowed to do the physiotherapy treatment or rehabilitation on inflated mattress.
e) The mattress should be protected against contact with body care cosmetics. It may cause
permanent damage of the mattress.
f) You must not use the mattress close to inflammable materials. It can lead to explosion !
g) Always check if the pump is plugged into appropriate socket (220-230 V/50 Hz).
h) The plug can not be removed from the socket when the pump is on.
i) Always make sure the pump is in a dry place, remember that it cannot get wet.
j) Do not touch the pump when it is wet. Always unplug the pump from electricity when it is
wet.
k) Never leave working pump unattended.
l) Pay special attention if the pump is used in the presence of children or people with disabilities.
m) Pump can be used according to its purpose only.
n) Do not use it with other, unauthorized devices.
o) Never use the pump with damaged or moist cable / plug. You should submit such a pump to a
service point.
p) The cable should be kept away from the hot surfaces.
q) Never leave the pump in a place where the cable or tubes can be dangerous for people who are
not familiar with the device.
r) Always pull the plug not the cable while disconnecting.
s) Never block the pump filter. The filter must be free from any impurities such as hair, fur etc.
t) Always consult your doctor before using the mattress.
u) Using the isopropyl alcohol or dissolvent may damage the pump.
v) Please, make sure that the pump is completely dry before setting on.
w) The mattress can be folded while storing. Before folding, check if it is completely dry which
protects it against mold. The mattress should be stored in a dry place.
x) Do not put the mattress close to the fire.
y) Keep the mattress away from sharp objects.
z) Don’t put the mattress directly on springs or frame with sharp edges.
aa) Pay attention to skin changes. If necessary, consult your doctor or nurse.
bb) Tubes can not be bent.
cc) Never use the mattress deflated.
dd) While moving bed, unplug the mattress.
7. Everyday use and maintenance
PHASES OF PUMP FUNCTIONING:
1 phase: Inflating all the cells
2 phase: Deflating the first section of cells
3 phase: Reinflating all the cells
4 phase: Deflating the second section of cells

8
SHORT-TERM CLOSURE OF THE AIR SUPPLY
In a situation when it is necessary to transport a patient with a bed for a short distance very
quickly, you can disconnect the mattress from the pump and close the air outlet.
To do this, switch off the pump, unplug the power cord from the wall outlet.
Remove the connecting element from pump jack and close the air outlet.
After transporting the patient you should attach the mattress to the pump as soon as possible.
Open the air outlet on the connecting element.
Connect the connecting element to the outlet of the pump.
Plug the power cord into the outlet.
Switch on the pump.
PROBLEM SOLVING
Do not try to repair the pump, do not open it as it can lead to electric shock!
The knob is in "ON" position but the pump does not work.
-Please, check if the cable is plugged to electric supply and to the pump. If not, you should plug
it.
-Please, check if there is a voltage in the electric circuit. If there is not, find the cause of such
situation.
-Please, check if the cable is not damaged. If so, please contact the manufacturer.
The pump works too slowly or the pressure is too low.
-Please, check if the pressure regulator is set on an appropriate pressure. If not, please, regulate
it.
-Please, check if the pipes are correctly connected to the air outlet. If not, press them in such a
way which prevents the air from escaping.
-Please, check if the pipes are not folded or pressed. If so, please, unbend them.
-Please, check if the cells are not damaged. If so, please, repair it using the reparation kit.
-Please, check if the pump works correctly –if you can hear some strange sounds like hissing
etc., please contact the manufacturer.
CARE AND MAINTENANCE
Disconnect the pump from electricity. Clean all the surfaces with a moist cloth. Before
switching on it has to be dry.
The mattress should be cleaned with water with soap. After cleaning, dry it carefully. The
mattress mustn't be washed in high temperature, dried in a washing machine, bleached,
chemically washed, ironed or pressed.
You must not use:
solvents,
toilet detergents,
sharp brushes and hard objects,
detergents that contain chlorine,
corrosive detergents,
Do not clean the exerciser with pressure or steam aggregates!

9
TECHNICAL REVIEW
Frequency
Object of control
Comments
Before first
installation
Checking the technical condition and
all the elements within the
packaging.
Check if any elements have any
visible mechanical damage.
Once a month
Cleanliness and general condition.
In case of mechanical damage
contact the producer immediately.
Repair
In case of reparation, please contact the producer.
Customer service
If you have any questions or need help, contact the producer.
8. Technical parametres
Permitted user weight
140 kg
Mattress Dimensions
1950 x 900 x 65 mm
Electrical Power Supply
220 - 230 V / 50 HZ
Duty Cycle
12 min
Air output:
8 l/min
Mattres weight
2 kg
Pumpweight
1,4 kg
Number of chambers
130
Material
PVC
Fuse
1 A
Description of the environment in which the
product will be used
temperature of storage and use
from +15ºC to +35ºC
The humidity for the storage and use
from 25% to 75%
printed on the product
9. Symbols
Confirmation of compliance with
EU standards
Protect from humidity
Manufacturer
Protect from sunlight
Date of production
Permitted user weight

10
Read the user's manual
Use inside buildings
Warning
The product is intended to
transport by car
Catalog number
The product is intended to the
transport by plane
Serial number
The product is compliant with standards on electrical and electronic equipment. It
should not be disposed with other waste from households. The user is responsible for providing the
equipment at the end of its service life to the appropriate collection points, under penalty of sanctions
provided by the law applicable in the matter of waste disposal. For further information on the
collection schemes available can be obtained from the local waste disposal center.
10. Contact details
mdh sp. z o.o.
22/24 ks. W. Tymienieckiego Street 90-349 Łódź, Poland
tel. [phone]
fax. [phone]
www.mdh.plwww.viteacare.com