
PARTS LIST
A) 1x Rear Bracket
B) 2x Armrests
C) 2x Slide Assist Rails
D) 2x Backrest Screw Knobs
E) 2x Screw-on Suction Leg Tips
F) 2x Armrest Knobs
G) 2x Armrest Screws
H) 2x Armrest Washers
ASSEMBLY INSTRUCTIONS
Watch at: bit.ly/toilet-rail
1. Detach the toilet seat lid from the toilet where you will be using this product.
2. Locate the rear white bracket (A) with the two screw holes on the toilet safety
rail.
3. Position the screw holes on the bracket (A) to the screw holes on the toilet,
making sure the bracket is flat against the toilet.
4. Add the toilet seat lid on top of the rear
bracket (A), align all the holes and fasten
with the same screws and bolts. See Fig. 1.
5. Screw suction leg tips (E) onto the ends of
armrests (B).
6. Attach armrests (B) using the knobs (F), screws (G) and washers (H) to the
assist rails (C). Make sure all knobs are secured before use of product.
See Fig 2.
AB
DF
G
C
Fig. 1
A
E
H
Fig. 2
F
H
G