Vive LVA1021 User manual

User Manual
LVA1021

No Tools Required!
ASSEMBLY INSTRUCTIONS
Watch at bit.ly/bathtubrail
1. Clean bathtub thoroughly and wipe dry before applying
rail. Surface must be dry and free of soapy residue for
proper installation.
2. Lift up knob (A) and rotate counterclockwise to open. Pull
out clamp (B) until rail is wide enough to slip on side of
bathtub.
3. Place Safety Rail on bathtub with knob (A) facing outside of
tub and tighten clockwise until rail feels tight and secure.
4. Push knob (A) down to original position.
5. Test installation of rail before using. Pull forward, back and
side to side. If rail slips or moves, make sure surface is free of
soapy lm and is dry, then replace at desired location and
re-tighten.
A

WARNING
• Check periodically before use and re-tighten as needed.
Rail may require tightening from time to time.
SPECIFICATIONS
• Height: 21”
• Length: 7.5”
• Depth: 6.5”
• Adjustable Clamp: 3.75” - 6.5”
• Product Weight: 5.2 LBS
• Max User Weight: 300 LBS

ACTIVATE YOUR GUARANTEE
You are protected by Vive Health’s industry leading
guarantees and customer service:
If you did not purchase through vivehealth.com,
please register at vivehealth.com/register to
validate your guarantee.
Product Code: LVA1021
[email protected]
1-800-487-3808
Monday - Friday 9am - 5pm EST