Vivo DESK-LEGS7 User manual

33.5”x 26” Desktop Monitor Riser Frame | Desk Legs
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-legs7
[email protected]om www.vivo-us.com 1-800-371-5654
SKU: DESK-LEGS7

2 3
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS
ASSEMBLY STEPS
STEP 1
Attach the crossbars (E) to the legs (D) using x8 M6x75 bolts (B), and tighten with the 4mm Allen
wrench (C).
WARNING!
A (x4)
M6x35
B(x8)
M6x75
C(x1)
4mm Allen
Wrench
D (x2)
Legs
STEP 2
Make sure the desk is fully lowered, then remove
the foot pads from underneath the desk.
Raise the desk to the maximum height and install the keyboard shelf.
STEP 4
STEP 3
E (x2)
Crossbar
Compatible VIVO Desk Risers:
DESK-V000DB
DESK-V000DW
DESK-V000EB
DESK-V001A
Place desk on the assembled legs (D) and
secure using x4 M6x35 bolts (A). Tighten with
the 4mm Allen wrench (C).

Last Updated: 10/16/2018
If any parts are received damaged or defective, please contact us. We are happy to
replace parts to ensure you have a fully functioning product.
For more VIVO products, check out our website at:
www.vivo-us.com.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]om www.vivo-us.com 1-800-371-5654