Vivo DESK V000B User manual

Sit and Stand Desktop
Instruction Manual
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Model: DESK V000B
Package Contents
Tools Required:
scissors
Scan the QR code with your mobile device or follow the link for
helpful videos related to this product.
- -https:// i o us.com/products/desk 000b
Warning!
DO NOT place hands on or near support bars. Pinch points are created during
lifting and lowering the work surface. Failure to follow these instructions may
result in serious personal injury.
A (x1)
Adjustable
desktop
C (x6)
Screws
E (x1)
Cable clip
B (x2)
Feet
Assembly Steps
Remove adjustable desktop
(A) from package. Ensure all
parts are present and
undamaged. Cut ties (F).
Step 1: Remo e from Package
D (x1)
4mm
allen key
F (x2)
Ties
G (x4)
Rubber
feet
H (x1)
Keyboard
tray
1

Step 2: Mount Feet
Step 3: Install Keyboard Tray
Mount front feet with pads (B) to frame
using six screws (C). Apply rubber feet
(G) to bottom of frame.
Squeeze the handles on both
sides and lift the desktop.
Hang keyboard tray over pre-
installed screws. Tighten screws
using the allen key (D). Attach
cable clip (E) where desired.
Warnings!
Keep monitor and laptop base fully on the
desktop. Allowing any part of base or stand to
hang off the edge may result in property damage
and or personal injury.
Raise desktop slowly. Raising desktop too fast
may create an unstable situation resulting in
property damage and or personal injury.
Leave enough slack in cable to allow for full
range of vertical motion (1 ” / 38 cm). Failure to
heed this warning may result in property damage
and or personal injury.
To avoid the potential to pinch cables it is
important to follow the cable routing instructions
in this manual. Failure to follow these instructions
may result in equipment damage or personal
injury.
Safety Warning
If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Contact us at:
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Last updated: 4/17/2018
Online Version
2