Vivo STAND-V001E User manual

Monito Des Mount
Instruction Manual
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Model STAND V001E
Tools Requied
phillips screwdriver
Pacage Contents
1
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v001e
A (x1)
Arm
B (x1)
Clamp
C (x1)
Plastic
Cap
D (x1)
Pole
E (x1)
Cable
Management
Clip
F (x1)
Grommet
Base
G (x )
Rubber
Pads
H (x1)
Bolt
I (x1)
Grommet
Plate
J (x1)
mm
Allen
Wrench
K (x1)
6mm
Allen
Wrench
M-A (x4)
M4x12
M-B (x4)
M X12
M-C (x4)
D

Assembl Steps
2
Step 1
Step 2
Attach plastic cap (C) to top of pole (D).
Stick rubber pads (G) to bottom of clamp (B) as shown in diagram. Align
pin in clamp (B) with bottom hole in pole (D). Attach pole (D) to clamp (B)
using bolt (H) and 6mm allen wrench (K). Mount clamp (B) to desktop
using hand bolt.
Option A
Step 2 (Continued)
Step 3
Option B
Remove hand bolt from clamp (B) by first removing phillips screw from
top of bolt, then remove plate and unscrew. Stick rubber pads (G) to
bottom of grommet base (F). Align pin in grommet base (F) with bottom
hole pole (D). Mount pole (D) and grommet base (F) to desktop using
grommet plate (I) and previously removed hand bolt.
Slide cable management clip (E) and arm (A) over top of pole (D) and
secure desired height using mm allen wrench (J).

Step 5
Step 6
If needed, tighten tilt joint suing 6mm
allen wrench (K).
Store tools in cable management clip (E) for future adjustments.
Step 4
Insert screws (M-A or M-B) with washers (M-C) into top two holes of
monitor, leaving 3mm of thread exposed. Hang monitor over slots in
VESA plate. Secure using screws (M-A or M-B) and washers (M-C) in
bottom two holes, and tighten all screws (M-A or M-B).
0
3

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Safet Waning
Contact us at
Last updated: 0 /17/18
Step 7
Manage cables and adjust tilt and rotation of monitor as desired.
4