Vivo MOUNT-MACM1 User manual

VESA Adapter
Designed for M1 iMac
Instruction Manual
SKU: MOUNT-MACM1
Assembly Video & Product Info
www.vivo-us.com/products/mount-macm1

2
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please contact our product support team at 309-278-5303 or [email protected]om for further assistance.
Check carefully to make sure there are no missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this
manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly or inappropriate use.
CAUTION!
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
We’re Here for You
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
Chat Us:
www.vivo-us.com
Give us a Call:
309-278-5303
Email Us:
[email protected]om AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
AVG. RESOLUTION TIME (within oice hrs): 5M 4S

3
A (x1)
Part Name
B (x1)
Part Name
S-A (x4)
M4x12
Thumbscrew
S-B (x4)
M4x8
Thumbscrew
Package Contents
Included Hardware & Tools
S-C (x1)
M4x22
Thumbscrew
S-D (x1)
M4x37
Thumbscrew
S-E (x2)
Screw Pad

4
ASSEMBLY STEPS
STEP 1
S-C (x1)
Partially insert M4x22mm Thumbscrew (S-C) into the center hole of VESA Adapter Plate (A), and M4x37mm
Thumbscrew (S-D) into the lower hole of VESA Adapter Plate (A). Press Screw Pads (S-E) onto the ends of
the Thumbscrews.
S-D (x1)
S-E (x1)
S-C
S-D
S-E
A

5
STEP 2
Assemble VESA Adapter Plate (A) and Clamp Plate (B) to the base of the iMac using M4x12mm
Thumbscrews (S-A).
NOTE: The Clamp Plate should be pushed all the way up underneath the iMac base, and the curved
tabs of the VESA Adapter Plate should be resting over the curved top of the base.
S-A (x4)
S-A
A
B

6
STEP 3
Install VESA Adapter (A) with iMac to the VESA mount using M4x8mm Thumbscrews (S-B).
S-B (x4)
S-B
A

7
STEP 4
Use M4x22mm and M4x37mm Thumbscrews (S-C and S-D) to adjust the angle of the iMac screen.
They may be le partially loose to work as a limiter while allowing the screen to tilt freely, or
tightened to hold a specific tilt angle.
S-C
S-D

LAST UPDATED: 11/14/23
REV2
v1.0
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
Monday-Friday from 7:00am-7:00pm CST
Need Help? Get In Touch
FOR MORE GREAT VIVO PRODUCTS,
CHECK OUT OUR WEBSITE AT: WWW.VIVO-US.COM
VIVO-us @vivo_us