Vivo MOUNT-VW080P User manual

Rotating TV Wall Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-vw080p
SKU: MOUNT-VW080P
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
TOOLS NEEDED
WARNING!
Phillips
Screwdriver
A (x1)
Mount
B(x2)
VESA Bracket
C(x4)
Carriage Bolt
M-F (x4)
Washer
M-G (x8)
5mm Spacer
M-H (x8)
15mm Spacer
W-A (x3)
Hex Head
Screw
M-E (x4)
M8x50
M-A (x4)
M5x14
M-B (x4)
M6x14
M-C (x4)
M6x30
M-D (x4)
M8x30
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
W-C (x3)
Washer
W-B (x3)
Anchor
Drill
D (x4)
Nut
E (x1)
Wrench
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
W-D (x2)
Flat Head
Screw
Studfinder Level Pencil Socket
Wrench

3
ASSEMBLY STEPS
STEP 1
Remove the TV plate from the mount (A) by pulling down on the cord to release the lock.
110lbs
(50kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO
MOUNT. We include mounting for brick and concrete walls. If unsure, please contact us at vivo-us.
com, email at [email protected]om, or call us at 309-278-5303.

4
STEP 2
OPTION A: WOOD STUD WALL
Using the center holes on the mount,
mark drilling locations. Use of a
stud finder is highly recommended.
Drill 2.4” (60mm) deep holes using
a 3/16” (4.5mm) drill bit, and secure
the mount to the wall using flat head
screws (W-D) in upper two holes, and
hex head screw (W-A) with washer
(W-C) in the lower hole.

5
OPTION B: CONCRETE/BRICK WALL
Using the upper side holes and lower
center hole on the mount, mark drilling
locations. Drill 2.6” (65mm) deep holes
using a 1/2” (12mm) drill bit, press
anchors (W-B) into holes, and secure
the mount to the wall using hex head
screws (W-A) and washers (W-C).
NOTE: Anchors are made for use with
concrete or brick, and will not work
with drywall.
STEP 3
Attach VESA brackets (B) to TV plate using carriage bolts (C) with nuts (D), and tighten with the
wrench (E).
STEP 2 (Continued)

6
STEP 4
With TV face down on a flat surface, secure assembled VESA brackets to the TV using
bolts (M-A, M-B, M-C, M-D, M-E) and washers (M-F). Use spacers (M-G, M-H) between
the TV and brackets if needed.

7
STEP 5
Carefully place the TV plate with brackets and TV into the opening on top of the mount
until the latch has engaged. The cord may be hidden by attaching to any part of the
steel mount.
STEP 6
Freely rotate the TV to the desired position and adjust the tilt as desired. To remove
the TV, pull down on the cord to release the latch, then li the TV o from the mount.

LAST UPDATED: 05/15/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303