Vivo STAND-SP02B User manual

Speake Stand
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-Model STAN SP02B
Tool Requied
phillips screwdriver
Package Content
1
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
- -http// i o u.com/poduct/tand p02b
G1 (x2) A1 (x2) A2 (x2)
A3 (x2) A4 (x8) A (x8)
A6 (x1) A7 (x8)
B1 (x1)
Shelf
B2 (x1)
Pole
B3 (x1)
Base

Aembl$ Step
2
Step 1
Step 2
Thread rod (G1) onto base (B1).
Slide pole (B2) onto rod (G1).
Step 3
Screw carpet spikes (A4) into base.

Step 5
Secure base to rod using plastic washer (A3), metal washer (A2), and
nut (A1), and tighten with wrench (A6). Carefully flip the assembled
stand right side up.
3
Step 4
Place glass base (B3) on rod.

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
Safet$ Waning
Contact u at
Last updated: 0 /17/18 4
Step 6
Step 7
If placing stand on hard floor, attach soft feet
(A7) to carpet spikes.
Apply non-slip pads (A ) to
top shelf, making sure
they're properly aligned
with the base of your
speaker.