Vivo MOUNT-HP03 User manual

Mounting VESA Adapter
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-hp03
[email protected]om www.vivo-us.com 1-800-371-5654
SKU: MOUNT-HP03

2 3
ASSEMBLY STEPS
STEP 1
Place monitor face down on a so,
nonabrasive surface. Press and hold the
release button while carefully detaching the
base from the monitor.
STEP 2
Align the adapter bracket (A) to the monitor. Insert the bracket into the monitor until it locks in place,
then insert the M4x12 bolt (D) and M4 washer (C) through the top of the bracket and into the hole in
the monitor. Tighten securely.
STEP 3
Connect the VESA plate to the adapter
bracket (A) using thumb bolts (B).
PACKAGE CONTENTS
TOOLS NEEDED
WARNING!
Phillips
Screwdriver
A (x1)
Adapter Bracket
B(x4)
M4x12 Thumb Bolt
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
C(x1)
M4 Washer
D(x1)
M4x12
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

Last Updated: 12/07/2018
If any parts are received damaged or defective, please contact us. We are happy to
replace parts to ensure you have a fully functioning product.
For more VIVO products, check out our website at:
www.vivo-us.com.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]om www.vivo-us.com 1-800-371-5654