Vivotek Bullet Series User manual

IP Surveillance
Installation Guide
VIVOTEK Bullet Series
J-Mount Bracket
Using AM-11C J-mount bracket
Rev. 1.0
Part no.: 625032000G
Accessory ordering part no.: 900029400G_
V01
625032000G_AM-11C_ig_VVTK_rev1.0_20150910.indd 1 2015/9/15 下午 02:22:44

2
AM-11C Dimensions and weight
Revision History:
* Rev. 1.0: Initial Release
Compatible VIVOTEK Cameras
I
IP8355H, IP8355EH, IP8365H, IP8365EH, IP8371, IP8371E, IB8373-EH, IP8372,
IB8381, IB8381-E
You may also refer to VIVOTEK's website for the list of supported models. Support for other models can
be available through time.
Installation
II
Package Contents: AM-11C, Installation Guide, screw pack, 1x hex wrench.
400 x 222.2 x 90mm, 1.2KG
1. Use the mounting holes on the bracket to mark the drill positions on ceiling. Drill screw holes and a
routing hole on ceiling. Hammer the anchors into the ceiling and install the bracket using the included
hex head screws and washers.
X4
X4
X1 X1
625032000G_AM-11C_ig_VVTK_rev1.0_20150910.indd 2 2015/9/15 下午 02:22:45

3
English
2. Prepare an Ethernet CAT5e cable and strip part of the cable sheath. Pass the cable through the
bracket using a pull string
o
O
g
B
b
G
br
BR
1
2
3
4
5
6
7
8
o: white/orange stripe
O: orange solid
g: white/green stripe
B: blue solid
b: white/blue stripe
G: green solid
br: white/brown stripe
BR: brown solid
3. Fasten an intersection bracket to the side of camera. Use the included cable gland to make sure the
Ethernet connection is waterproof. Pass the cable through the waterproof components, and use a
crimping tool to attach to an RJ45 connector.
When done, connect the RJ45 connector and tighten up
the waterproof cable gland.
625032000G_AM-11C_ig_VVTK_rev1.0_20150910.indd 3 2015/9/15 下午 02:22:46

4
4. Push the spring mortise and hook the bracket onto the groove on the ceiling mount bracket.
625032000G_AM-11C_ig_VVTK_rev1.0_20150910.indd 4 2015/9/15 下午 02:22:47

5
English
5. Secure the installation by fastening two socket screws on the other side of the camera.
6. Loosen the socket screws on the bracket to adjust the camera's shooting direction. When done,
fasten the retention screw. Please refer to the camera's documentation for more details about
camera installation.
625032000G_AM-11C_ig_VVTK_rev1.0_20150910.indd 5 2015/9/15 下午 02:22:48

6
This page is intentionally left blank.
625032000G_AM-11C_ig_VVTK_rev1.0_20150910.indd 6 2015/9/15 下午 02:22:48

7
English
This page is intentionally left blank.
625032000G_AM-11C_ig_VVTK_rev1.0_20150910.indd 7 2015/9/15 下午 02:22:49

8
This page is intentionally left blank.
625032000G_AM-11C_ig_VVTK_rev1.0_20150910.indd 8 2015/9/15 下午 02:22:49