ViziT VIZIT-TU41 Series User manual

VIZIT-TK401D
Concierge terminal VIZIT-TK401D (the terminal) and control unit VIZIT-TU41x are parts of Concierge
Console VIZIT-PKxxx, intended for operation in VIZIT doorphones.
FEATURES
zIntercom "Visitor - Subscriber / Abonent" (V ÎA)
zIntercom "Visitor - Concierge" (V ÎC)
zIntercom "Concierge - Visitor", (C ÎV) concierge-initiated
zIntercom "Concierge - Subscriber" (C ÎA)
zIntercom "Subscriber - Concierge" (A ÎC)
zIndication of busy / free line
zCalls transferring from the doorstation to concierge*
zCalls transferring from the concierge to subscriber*
zRedialing of the last number
zIndication of operating modes, clock and calendar
zMessages: English, Russian *
zSpeakerphone
zSaving of all settings and clock in case of power failure
* - This feature is programmable in VIZIT-TU41x control unit setup.
SPECIFICATIONS
Input voltage, VDC 17
Power consumption, Wmax 1.5
Dimensions, mm 220x145x75
Weight, kg 0.6
Operating conditions:
- Ambient temperature range +1°C ... + 40°C
- Relative humidity of air up to 93% at 25°C
SAFETY INSTRUCTIONS
The terminal does not contain voltage above 18 VDC.
To avoid damage do not make any connections or repair when the power is on.
The product shall not be exposed to dripping or splashing and no objects filled with liquids
shall be placed on the product.
INSTALLATION
Place the terminal on a table or fix it on a wall. The terminal mounting dimensions are given on Figure 2.
1. Install two AA batteries into the battery compartment on the terminal bottom. Observe polarity.
Batteries keep the clock and calendar running (without indication) when the power is off.
2. Connect the handset to the terminal using the cable supplied.
3. Connect the terminal to the mounting box KC-101 using the cable supplied.
4. Connect KC-101 to the control unit VIZIT-TU41x according to its operating instruction.
Concierge Console operation is given in VIZIT-TU41x operating instruction.
PARTS LIST
Concierge terminal VIZIT-TK401D 1 pc.
Connecting box KC-101 1 pc.
Operating instruction 1 pc.
Mounting kit 1 pc.
Package 1 pc.

Handset
Mic
Buttons
Display
83
Screws
To mounting box KC-101
Lid Batteries
To handse
t
Figure 2 - Bottom view.
Figure 1 - Outward view.