ViziT TK401DN User manual

VIZIT-TK401D
OPERATING INSTRUCTION
14
11
0.6
VIZIT-TK401D 1
1
1
1
1
1
1
N
VIZIT-TU412M1
MM
SPECIFICATIONS
5 mm
200 mm
50 mm
5 mm
kg.
PARTS LIST
N
KC-101
SAFETY INSTRUCTIONS
INSTALLATION
Fig. 1
Fig. 2
VIZIT-TU412M1
Fig. 2
CONCIERGE CONSOLE FEATURES
w
w
w
w
w
w
w
w
w
w
w
w
w
VA
V C
C V
Subscriber C A
Subscriber - A C
Indication of operating modes, time and date
Messages in English or Russian*
Speakerphone
Saving of all settings and time/date in case of power failure
through see the operating
instruction, section ‘Programming’)
Dimensions
width
height
depth (without stand)
depth (with stand)
Weight
Concierge Terminal pc.
Connecting box pc.
Line cord pc.
Handset pc.
Stand pc.
Operating instruction pc.
Package pc.
Appearance and controls layout are shown in
Connections and dimensions are shown in
T desk / table or mount it on a wall. Make connections as shown in the Control Unit
operating instruction.
For desktop installation, use a plastic stand supplied with the Terminal. For on-wall mounting, use screws (4x25) and
concrete inserts (6x30), not supplied. Mounting dimensions are given in .
()
()
()-
()
()
*
*
*
.
:
-
-
-
-
.
.
Place the erminal on
Concierge erminal (the rminal ) Concierge Console
doorphones .
Intercom "Visitor - Subscriber / Abonent"
Intercom "Visitor - Concierge"
Intercom "Concierge - Visitor" concierge-initiated
Intercom "Concierge - "
Intercom “ Concierge"
Indication of busy / free line
Calls transfer from doorstation to concierge
Calls transfer from concierge to subscriber
Redial of the last number
This feature is programmable ontrol nit setup (
Ambient temperature range
Relative humidity of air up to at
The erminal does not contain voltage above .
To avoid damage do not make any connections or repair when the power is on.
The product shall not be exposed to dripping or splashing and no objects filled with liquids shall be placed on the product.
T Te hereinafter is part of intended for
operation within & video doorphones
As part of Concierge Console , the Terminal operates in system with Control Unit
CU
T
,
VIZIT-TK401D VIZIT-PK200
VIZIT
VIZIT-PK200
VIZIT-TU412 1 VIZIT-TU412 1
+1°C ... + 40°C
93% +25°C
18 VDC
http://vizit.eu/eurounion/)
N
OPERATING CONDITIONS
For qualified installation, wiring and servicing refer to technical and commercial partners of VIZIT TM.
The list of companies is given on VIZIT.EU ( .
www.vizit-group.com VIZIT-TK401DN Operating Instruction (revision 11 22015- ) 1/

1 Connect the handset to the Terminal
2 Connect the Terminal to connecting box using the line cord supplied.
Connect the connecting box to Control Unit according to wiring diagrams given in the Control
Unit operating instruction.
..
.
3.
KC-101
KC-101 VIZIT-TU412M1
VIZIT-TU412M1
Operating order is given in the Control Unit VIZIT-TU412M1 operating instruction.
Figure Front and bottom view1 -
Buttons
Microphone
Handset Display
Speakerphone
12 3: 0 V-АА- C
Mon 70 .08.10
Plastic stand
Figure Connections and mounting dimensions2 -
To connecting box
KC-101
To handset
85
85
28
www.vizit-group.com VIZIT-TK401DN Operating Instruction (revision 11 2 22015- ) /