VMP AP-2B User manual

AP-2B
Instruction Sheet For:
For more information, please contact us at:
345 Log Canoe Circle, Stevensville, Maryland 21666
Toll Free: 877.281.2169 Phone: [phone] Fax: [phone]
www.videomount.com

3
1 2
AP-2B
ITEM NO.
DESCRIPTION
QTY.
1
Adaptor Plate
1
2
Flat Head Screw M5*P0.8*L16
4
3
Nylon Nut M5*P0.8
4

Step 1
Before starting, lay out all parts to your mount and match them to
the parts list provided. Verify that you have all your parts before
attempting to assemble the mount.
Note: For the purposes of these instructions it is assumed that you
have already assembled the VESA 200 mount which you want to
attach the AP-2B to. If you have not done so please proceed to
do so at this time.
Step 2
Attach the AP-2B to the VESA 200 plate by inserting the flat head
screws into the countersink holes in the front of the AP-2B .
Then use the nylon nuts on the backside of the VESA 200 plate
to secure the flat head screws .
Step 3
Attach the flat screen to the AP-2B using the correct size screws
that are provided with the VESA 200 mount.
Please verify that all nuts and screws are securely tightened.
Step 2: Attaching the AP-2B
to the mount
Step 3: Attaching the flat
screen to the AP-2B
WARNING: The installer of these products must verify that the mount surface, ceiling or wall, will safely
support the combined weight of all attached equipment and hardware. Video Mount Products will not
be held liable for the improper use or installation of its products.
Enjoy Your Mount!
2
1
1
3
2