VOGELS RISE A151 User manual

HANDSET FUNCTIONS
WHAT TO DO IN CASE OF AN ERROR
1
Handset functions & what to do in case of an error:
Button functionality RISE
Nr. Function Required action
1 Going up Press Up button
2 Going down Press Down button
3a Reset system 1. Move system to lowest position.
2. Press Down button 10 sec.
3. Press Down button again to finish action.
a. Feedback: System goes to its lowest
position and 7 mm up.
3b Hard System Reset 1. Unplug power cable, wait for 30+ seconds and
plug in the power cable.
2. Move system to lowest position.
3. Press Down button 10 sec.
4. Press Down button again to finish action.
a. Feedback: System goes to its lowest position
and 7 mm up.
4a Unlock child lock Press Up and Down button 2 seconds simultaneously
Feedback: System goes up and down 7 mm.
4b Lock child lock System automatically locks 5 minutes after the
last interaction.
5 Disable/enable Press Up and Down button 20 seconds simultaneously
child lock feature Feedback: System goes up and down 7 mm twice.
Not working system guide:
1 Check whether all cables are still connected (power cable, handset cable,
gyroscope cable, etc.)
2 Check whether the system obstructed by an object (for example: a desk)
3 Check if the system's child lock is unlocked. Not sure? Unlock the system.
4 If there is no object obstructing the lift, run a system reset.
5 If a System Reset, doesn't solve it, try to run a Hard System Reset.

1. Open top cover
Open the top cover, (using a screwdriver
could be useful).
Aer opening you can pull it up.
2. Plug in cable
Plug the RISE A151 Programmer cable into
the controlbox, using the outer right slot.
INSTALLER SOFTWARE
OUICK GUIDE
2
BACK

3. Connect to PC
3a: Connect to PC
• Select port
• Press Connect
3b: Fill in password
• 0000
4. Le window
4a: Status of system:
Normal, reset or Error code (E…)
4b: • Displayed current height
• Arrows:
To move system up or down
• Move to:
- Set height
- Press ‘Move to’ to go to the
predefined position
• Stop: Stop movement
(only needed in case of set
‘move to’)
4c: Press and hold to reset system
INSTALLER SOFTWARE
OUICK GUIDE
3
1a
1b
2a
2b
2c

5. Configure - Overview
5a: Creates an overview of all settings
5b: Export Image:
Creates a screenshot of the page
5c: Export data:
Creates an overview of all the data
in an ‘.ini’ file
6. Configure - Settings
6a: Switching the child lock on/o:
• Press the switch
• Press Apply Parameters
Import Parameters:
Not accessible for Installer
INSTALLER SOFTWARE
OUICK GUIDE
4
3a 3b 3c
4a

7. Configure - Limit
7a: Switch Top Limit and/or Bottom
Limit on/o
7b: Set a limit
7c: Apply Parameters to change the
settings
8. Monitoring graph
8a: Gives an overview of the current,
voltage and the position (height)
of the columns
8b: Clear Screen: Creates the graph blanc
8c: Export Image: Creates a screen shot
of the window
8d: Export Parameters:
Gives all the x and y information of
current, voltage and position
INSTALLER SOFTWARE
OUICK GUIDE
5
5b
5a
5c
6a
6b 6c 6d

9. Statistics
9a: Run/Stop: Gives an overview of the
travelled distance of the system’s
lifetime
9b: Error Reason: Gives an overview of the
number of errors in the system’s lifetime
9c: System Log: Gives an overview of the
last 10 errors and/or anti-collisions
10. Connect/Disconnect
10a: Disconnect: disconnect system
(might be useful in case the system is
not working properly)
INSTALLER SOFTWARE
OUICK GUIDE
6
7a
7b
7c
8a

Vogel’s Products BV
HONDSRUGLAAN 93,
5628 DB EINDHOVEN,
THE NETHERLANDS
T [phone]
E inf[email protected]
W www.vogels.com