Void Incubus System User manual

voidacoustics.com
Incubus System
Sonically and visually paralysing
USER GUIDE V2.0

©2022 Void Acoustics Research Ltd.
This user guide is subject to change without notice.
For the latest online version, visit: www.voidacoustics.com
Void Acoustics and the Void logo are registered trademarks of Void Acoustics
Research Ltd. in the United Kingdom, USA and other countries; all other Void
trademarks are the property of Void Acoustics Research Ltd.

UG10570-2.0 - Incubus System User Guide V2.0 Page 3
Contents
1 Safety and Regulations 4
1.1 Important Safety Instructions 4
1.2 Limitations 4
1.3 EC Declaration of Conformity 4
1.4 UKCA Conformity 4
1.5 Warranty Statement 4
1.6 WEEE Directive 4
2 Unpacking and Checking 5
3About 6
3.1 Welcome 6
3.2 Incubus Series Overview 6
4 Specifications and Dimensions 7
4.1 Air Array 7
4.1.1 Key Features 7
4.1.2 Air Array Specifications 7
4.1.3 Air Array Dimensions 8
4.2 Hyperfold 9
4.2.1 Key Features 9
4.2.2 Hyperfold Specifications 9
4.2.3 Hyperfold Dimensions 10
4.2.4 Hyperfold Impedance Graph 10
4.3 Incubus Sub 11
4.3.1 Key Features 11
4.3.2 Incubus Sub Specifications 11
4.3.3 Incubus Sub Dimensions 12
4.3.4 Incubus Sub Impedance Graph 12
5 Cable and Wiring 13
5.1 Electrical Safety 13
5.2 Cable Considerations for Fixed Instal-
lations
13
5.3 Typical Amplifier Rack Array 13
5.4 Air Array Layout 14
5.5 Air Array Wiring Diagram 15
5.6 Air Array LF Bias Q5 speakON™ A
wiring
16
5.7 Air Array MHF Bias Q5 speakON™ B
wiring
17
5.8 Hyperfold Wiring Diagram 18
5.9 Hyperfold Bias Q5 speakON™ wiring 18
5.10 Incubus Sub Wiring Diagram 19
5.11 Incubus Sub Bias Q5 speakON™
wiring
20
6 Mounting 21
6.1 Installation Safety 21
6.2 Ground Stack Bracket 22
7 Adjustments 24
7.1 Wheel Removal 24
7.2 Hyperfold Grille Removal 25
8 Service 26
8.1 Return Authorisation 26
8.2 Shipping and Packing Considerations 26
9 Appendix 27

Page 4UG10570-2.0 - Incubus System User Guide V2.0
1.1 Important safety instructions
The lightning flash with an arrowhead symbol
within an equilateral triangle is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sucient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user of the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
Safety instructions - read this first
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
8. Do not install near any heat source such as radiators, heat
registers, stoves, or other such apparatus that produce heat.
9. Do not defeat the safety purpose of the grounding-type plug. A
grounding type plug has two blades and a third grounding prong.
The third prong is provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for replacement
of the obsolete outlet.
10. Protect power cords from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit the apparatus.
11. Only use attachments and accessories specified by Void
Acoustics.
12. Only use with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug the apparatus during lightning storms or when unused
for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any way,
such as when the power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. Since the mains power supply cord attachment plug is used to
disconnect the device, the plug should always be easily accessible.
16. Void loudspeakers can produce sound levels capable of
causing permanent hearing damage from prolonged exposure.
The higher the sound level, the less exposure needed to cause
such damage. Avoid prolonged exposure to the high sound levels
from the loudspeaker.
1.2 Limitations
This guide is provided to help familiarise the user with the
loudspeaker system and its accessories. It is not intended to
provide comprehensive electrical, fire, mechanical and noise
training and is not a substitute for industry-approved training. Nor
does this guide absolve the user of their obligation to comply
with all relevant safety legislation and codes of practice. While
every care has been taken in creating this guide, safety is user-
dependent and Void Acoustics Research Ltd cannot guarantee
complete safety whenever the system is rigged and operated.
1.3 EC declaration of conformity
For EC Declaration of Conformity please go to:
www.voidacoustics.com/eu-declaration-loudspeakers
1.4 UKCA marking
For details of the UKCA marking go to:
www.voidacoustics.com/uk-declaration-loudspeakers
1.5 Warranty statement
For warranty statement go to:
https://voidacoustics.com/terms-conditions/
1.6 WEEE directive
If the time arises to throw away your product, please recycle all
the components possible.
This symbol indicates that when the end-user
wishes to discard this product, it must be sent
to separate collection facilities for recovery
and recycling. By separating this product from
other household-type waste, the volume of
waste sent to incinerators or land-fills will be
reduced and natural resources will thus be
conserved.
The Waste Electrical and Electronic Equipment Directive (WEEE
Directive) aims to minimise the impact of electrical and electronic
goods on the environment. Void Acoustics Research Ltd complies
with the Directive 2002/96/EC and 2003/108/EC of the European
Parliament on waste electrical finance the cost of treatment and
recovery of electronic equipment (WEEE) in order to reduce the
amount of WEEE that is being disposed of in land-fill sites. All of
our products are marked with the WEEE symbol; this indicates that
this product must NOT be disposed of with other waste. Instead
it is the user’s responsibility to dispose of their waste electrical
and electronic equipment by handing it over to an approved
reprocessor, or by returning it to Void Acoustics Research Ltd for
reprocessing. For more information about where you can send
your waste equipment for recycling, please contact Void Acoustics
Research Ltd or one of your local distributors.
1 Safety and Regulations

Page 5UG10570-2.0 - Incubus System User Guide V2.0
2 Unpacking and Checking
All Void Acoustics products are carefully manufactured and thoroughly tested before being
despatched. Your dealer will ensure that your Void products are in pristine condition before
being forwarded to you but mistakes and accidents can happen.
Before signing for your delivery:
• Inspect your shipment for any signs of contamination, abuse or transit damage as soon
as you receive it
• Check your Void Acoustics delivery fully against your order
• If your shipment is incomplete or any of its contents are found to be damaged; inform
the shipping company and inform your dealer.
Air Array loudspeakers are heavy (144.8 kg/319 lbs including stand) and require a minimum
two people to lift.
• Undo the four butterfly catches on the transport case then remove the lid making sure the
lid is clear before moving sideways
• If you need to place the Air Array on a flat surface ensure you use a lint free product to
protect the finish
• When removing the Air Array take care not to damage the lower tray of the transport case.
Keep the original packaging in case you need to return a product for service later.
See section 1.5 for warranty conditions and see section 8 if your product needs servicing.

3.1 Welcome
Many thanks for purchasing this Void Acoustics Incubus Series loudspeaker. We truly
appreciate your support. At Void, we design, manufacture and distribute advanced professional
audio systems for the installed and live sound market sectors. Like all Void products, our highly
skilled and experienced engineers have successfully combined pioneering technologies with
ground-breaking design aesthetics, to bring you superior sound quality and visual innovation.
In buying this product, you are now part of the Void family and we hope using it brings
you years of satisfaction. This guide will help you both use this product safely and ensure it
performs to its full capability.
3.2 Incubus series overview
Providing levels of control thought impossible and perfect sound quality, the Incubus is the
number one choice for club dance systems, owing to its striking physical signature and
performance. Hearing the highest quality of unadulterated sound through an Incubus makes it
possible to feel as though you are inside music, in a fully immersive aural experience.
Page 6UG10570-2.0 - Incubus System User Guide V2.0
3 About

Page 7UG10570-2.0 - Incubus System User Guide V2.0
4 Specifications and Dimensions
4.1 Air Array
4.1.1 Key features
• Visually striking appearance for style-led environments
• Fibreglass composite construction
• 14 discrete proprietary drive units
• Integrated flying and mounting system
• Ground stack on ow frequency enclosures
• Optional floor stand or flying bracket
• Standard red finish, optional custom colours
4.1.2 Air Array specifications
Frequency response 90 Hz - 26 kHz ±3 dB
Eciency1LF: 111 dB 1W/1m, MF: 114 dB 1W/1m, HF: 116 dB 1W/1m
Nominal impedance LF: 2 x 4 Ω, MF: 2 x 4 Ω, HF: 2 x 5.33 Ω
Power handling2LF: 3600 W AES, MF: 800 W AES, HF: 320 W AES
Maximum output3143 dB cont, 146 dB peak
Driver configuration 4 x 12” LF, 4 x 3” MF compression driver,
6 x 1” HF compression driver
Dispersion 90°H x 45°V
Connectors 2 x 8-pole speakON™ NL8
Height 1240 mm (48.8”)
Width 944 mm (37.2”)
Depth 813 mm (32”)
Weight 144.8 kg (319.2 lbs) including stand
Enclosure Fibreglass composite
Rigging Stack mounted or proprietary flying system
Finish Smooth cellulose
1Measured in half space 2AES2 - 1984 compliant 3Calculated

Page 8UG10570-2.0 - Incubus System User Guide V2.0
4.1.3 Air Array dimensions
944 (37.2”)
1422 (56”)
944 (37.2”)
1012 (39.8”)
944 (37.2”)
1012 (39.8”)
813 (32”)
1012 (39.8”) 944 (37.2”)
1422 (56”)
1240 (48.8”)
Figure 4.1: Dimensions
4 Specifications and Dimensions

Page 9UG10570-2.0 - Incubus System User Guide V2.0
4.2 Hyperfold
4.2.1 Key features
• High power density in a compact footprint
• Exceptional upper bass speed and articulation
• Four high power 15” low frequency drivers
• Distinctive aluminium cabinet bracing
• 18 mm birch plywood construction
• Textured ‘TourCoat’ polyurea finish
4.2.2 Hyperfold specifications
Frequency response 60 Hz - 190 Hz ±3 dB
Eciency1109.5 dB 1W/1m
Crossover points Preset via dedicated processor
Nominal impedance 2 x 4 Ω
Power handling24000 W AES
Maximum output3142 dB cont, 145 dB peak
Configuration 4 x 15” low frequency drivers
Dispersion Array dependent
Connectors 2 x 4-pole speakON™ NL4
Height 748 mm (29.4”)
Width 738 mm (29.1”)
Depth 1218 mm (47.9”)
Weight 150 kg (330.7 lbs)
Enclosure 18 mm birch plywood
Finish Textured ‘TourCoat’ polyurea, smooth cellulose
1Measured in half space 2AES2 - 1984 compliant 3Calculated
4 Specifications and Dimensions

Page 10UG10570-2.0 - Incubus System User Guide V2.0
4.2.3 Hyperfold dimensions
738 (29.1”)
1218 (47.9”)
738 (29.1”)
738 (29.1”)
738 (29.1”)
1218 (47.9”)
748 (29.4”)
738 (29.1”)
748 (29.4”)
1218 (47.9”)
Figure 4.2: Dimensions
4.2.4 Hyperfold impedance graph
10 10020 50 200 500 1k 2k 5k 10k 20k
5
10
15
20
25
Frequency (Hz)
Impedance (Ω)
Figure 4.3: Impedance graph
4 Specifications and Dimensions

Page 11UG10570-2.0 - Incubus System User Guide V2.0
4.3 Incubus Sub
4.3.1 Key features
• Distinctive aluminium cabinet bracing
• 3 x high power 21” low frequency drivers
• Extended sub frequency response to 30 Hz
• 18 mm birch plywood construction
• Black textured ‘TourCoat’ polyurea finish
4.3.2 Incubus Sub specifications
Frequency response 29 Hz - 95 Hz ±3 dB
Eciency1105 dB 1W/1m
Crossover point Preset via dedicated processor
Nominal impedance 3 x 8 Ω
Power Handling26000 W AES
Maximum output3140 dB cont, 146 dB peak
Driver configuration 3 x 21” LF with 6” voice coils
Dispersion Array dependent
Connectors 2 x 8-pole speakON™ NL8
Height 704 mm (27.7”)
Width 1479 mm (58.2”)
Depth 1218 mm (48”)
Weight 214 kg (471.8 lbs)
Enclosure 18 mm birch plywood
Finish Textured ‘TourCoat’ polyurea
1Measured in half space 2AES2 - 1984 compliant 3Calculated
4 Specifications and Dimensions

Page 12UG10570-2.0 - Incubus System User Guide V2.0
4.3.3 Incubus Sub dimensions
1479 (58.2”)
1218 (48”)
1479 (58.2”)
1479 (58.2”)
1218 696 (27.4”)
1218 (48”)
704 (27.7”)
1479 (58.2”)
704 (27.7”)
1225 (48.2”)
1225 (48.2”)
Figure 4.4: Dimensions
4.3.4 Incubus Sub impedance graph
10 10020 50 200 500 1k 2k 5k 10k 20k
10
20
30
40
50
Frequency (Hz)
Impedance (Ω)
Figure 4.5: Impedance graph
4 Specifications and Dimensions

Page 13UG10570-2.0 - Incubus System User Guide V2.0
5 Cable and Wiring
5.1 Electrical safety
To avoid electrical hazards please note the following:
• Do not access the inside of any electrical equipment. Refer servicing to
Void-approved service agents
5.2 Cable considerations for fixed installations
We recommend specifying installation-grade Low Smoke Zero Halogen (LSZH) cables for
permanent installations. The cables should use Oxygen Free Copper (OFC) of grade C11000
or above. Cables for permanent installations should be compliant with the following standards:
• IEC 60332.1 Fire retardancy of a single cable
• IEC 60332.3C Fire retardancy of bunched cables
• IEC 60754.1 Amount of Halogen Gas Emissions
• IEC 60754.2 Degree of acidity of released gases
• IEC 61034.2 Measurement of smoke density
We suggest using the following maximum copper cable lengths to keep level losses below 0.6 dB.
Metric mm2Imperial AWG 8 Ωload 4 Ωload 2 Ωload
2.50 mm213 AWG 36 m 18 m 9 m
4.00 mm211 AWG 60 m 30 m 15 m
5.3 Typical amplifier rack array
Figure 5.1: Typical amplifier rack layout for Q5

Page 14UG10570-2.0 - Incubus System User Guide V2.0
5 Cable and Wiring
speakONTM A speakONTM B
Figure 5.2: speakONTM layout
5.4 Air Array layout
For clarity throughout this guide the speakONTM connections on the rear of the Air Array will be
referred to speakONTM A for the left and speakONTM B for the right as shown in figure 6.1.
A further aid given will be a diagrammatic representation of which drivers would be engaged
within the loudspeaker for each section. So, for example, figure 6.3 below shows the section
for the low frequency drivers.
Figure 5.3: LF drivers

Page 15UG10570-2.0 - Incubus System User Guide V2.0
+
-
1+
1-
2+
2-
3+
3-
4+
4-
Left
Top 12” LF
1+ 1-
2+
2-3+
3-
4+
4-
+
-
Top 12” LF
+
-
Bottom 12” LF
+
-
Bottom 12” LF
+
-
Bottom 1.5” HF
+
-
Bottom 1.5” HF
+
-
Bottom 1.5” HF
+
-
Top 1.5” HF
+
-
Top 1.5” HF
+
-
Top 1.5” HF
+
-
Top 3” MF
+
-
Top 3” MF
+
-
Bottom 3” MF
+
-
1+
1-
2+
2-
3+
3-
4+
4-
Right
1+ 1-
2+
2-3+
3-
4+
4-
Bottom 3” MF
speakONTM A NL8
Pins Driver Power handling Impedance
+/-1 Bottom 2 x 12” 1800 W AES 4 Ω
+/-2 Top 2 x 12” 1800 W AES 4 Ω
speakONTM B NL8
Pins Driver Power handling Impedance
+/-1 Bottom 2 x 3” 400 W AES 4 Ω
+/-2 Top 2 x 3” 400 W AES 4 Ω
+/-3 Bottom 3 x 1” 160 W AES 5.3 Ω
+/-4 Top 3 x 1” 160 W AES 5.3 Ω
5.5 Air Array wiring diagram
Figure 5.4: Air Array wiring diagram
speakONTM A speakONTM B
5 Cable and Wiring

Page 16UG10570-2.0 - Incubus System User Guide V2.0
5.6 Air Array LF Bias Q5 speakONTM A wiring
LF 1+
LF 1+
LF 1-
LF 2+
LF 2-
LF 1-
LF 2+
LF 2-
Figure 5.5: Bias V3 left speakONTM A connection
(NOTE: pins +/-3 and +/-4 are not connected)
Bias Q5 for LF (speakONTM A connection)
Channel Channel 1 Channel 2
Output Bottom 2 x 12” LF Top 2 x 12” LF
speakONTM NL8 pins +/-1 +/-2
5 Cable and Wiring

Page 17UG10570-2.0 - Incubus System User Guide V2.0
MF 1+
MF 1-
MF 2+
MF 2-
HF 3+
HF 3-
HF 4+
HF 4-
MF 1+ (MF 1+)
MF 1- (MF 1-)
MF 2+ (MF 2+)
MF 2- (MF 2-)
HF 1+ (HF 3+)
HF 1- (HF 3-)
HF 2+ (HF 4+)
HF 2- (HF 4-)
Figure 5.6: Bias Q5 (right speakONTM connection)
Bias Q5 for HF (speakONTM B connection)
Output 2 Channel 3 Channel 4
Output Bottom 3 x 1” HF Top 3 x 1” HF
speakONTM NL8 pins +/-3 +/-4
5.7 Air Array MHF Bias Q5 speakONTM B wiring
Bias Q5 for MF (speakONTM B connection)
Output 1 Channel 1 Channel 2
Output Bottom 2 x 3” MF Top 2 x 3” MF
speakONTM NL8 pins +/-1 +/-2
5 Cable and Wiring

Page 18UG10570-2.0 - Incubus System User Guide V2.0
+
-
1+
1-
2+
2-
1+
1-
2+
2-
1+
1-
2+
2-
1+
1-
2+
2-
In
Out/Link
15” LF
+
-
15” LF
+
-
15” LF
+
-
15” LF
5.8 Hyperfold wiring diagram
speakONTM pins +/-1 speakONTM pins +/-2
In LF (2 x 15”) LF (2 x 15”)
Out LF link LF link
Figure 5.7: Wiring diagram
5.9 Hyperfold Bias Q5 speakONTM wiring
1+
1-
2+
2-
1+
1-
2+
2-
Figure 5.8: Bias Q5
Bias Q5 Channel 1 Channel 2
Output LF (2 x 15”) LF (2 x 15”)
Max parallel units 2 (2 Ωload to amplifier) 2 (2 Ωload to amplifier)
5 Cable and Wiring

Page 19UG10570-2.0 - Incubus System User Guide V2.0
1+
1-
2+
2-
3+
3-
4+
4-
In
1+ 1-
2+
2-3+
3-
4+
4-
+
-
21” LF (2)
+
-
21” LF (1)
+
-
21” LF (3)
1+
1-
2+
2-
3+
3-
4+
4-
Out/Link
1+ 1-
2+
2-3+
3-
4+
4-
5.10 Incubus Sub wiring diagram
Figure 5.9: Wiring diagram
speakONTM pins +/-1 +/-2 +/-3 +/-4
In 21” LF (1) 21” LF (2) 21” LF (3) n/c
Out LF link LF link LF link n/c
5 Cable and Wiring

Page 20UG10570-2.0 - Incubus System User Guide V2.0
LF 1+
LF 2-
LF 1+
LF 2-
LF 1+
LF 2-
LF 1+
LF 1-
LF 2+
LF 2-
LF 3+
LF 3-
LF 1+
LF 1-
LF 2+
LF 2-
LF 3+
LF 3-
Incubus Sub 1
Incubus Sub 2
In
Out/Link
In
Out/Link
LF 1+
LF 1-
LF 2+
LF 2-
LF 3+
LF 3-
LF 1+
LF 1-
LF 2+
LF 2-
LF 3+
LF 3-
Figure 5.10: Bias Q5
Amplifier Bias Q5 1 Bias Q5 3 Bias Q5 3
Output Output 1 Output 1 Output 1
speakONTM NL4 pins 1+/2- 1+/2- 1+/2-
Drivers 21” LF (1) 21” LF (2) 21” LF (3)
speakONTM NL8 pins 1+/1- 2+/2- 3+/3-
5.11 Incubus Sub Bias Q5 speakONTM wiring
5 Cable and Wiring