Vokal VMM-100 User manual

VMM-100
Meeting Microphone
Owner’s Guide

• Cartridge: cardioid condenser
• Frequency response: 40~16000Hz
• Sensitivity: -43 +/- 2dB
• Impedance: 2.0 K Ohms
• Power requirements: DC 1.5V x2
Thanks for purchasing a Vokal VMM-100 Meeting Microphone.
This product was manufactured using high quality standards and may be used at many
different types of meetings. Please read the instructions before using the product.
Introduction
1 - Insert batteries observing the correct polarities and connect de audio cable.
2 - Adjust the volume on the mixer and/or amplifier at the minimum level.
3 - Switch the microphone to the ON position and then adjust the volume on the mixer
and/or amplifier to the desired level.
Attention:
1 - A feedback noise may occur if the microphone is positioned close to the speakers or if
the volume level is too high. Position the microphone at a reasonable distance from the
speaker and make sure the volume level is adequate.
2 - Remove the batteries if the microphone will not be used for a long period, to avoid
corrosion damage caused by batteries spills.
Instructions
Specifications
Imported and distributed by
Miami Audio Music Corp.
Made in China
www.miamiaudiomusic.com
Reseller
WARRANTY
90 days from purchase date.