VOLKTEK IMC-561P User manual
-1- -2- -3-
Quick Installation Guide
1. Overview
2. Package Checklist
4. Location
3. Hardware Installation Procedure
STEP 1:
Take out the device from its packing.
STEP 2:
Attach the DIN Rail Kit or Wall Mount Kit (optional) as picture.
Verify that the package contains the following items:
IMC-561P x 1
Mounting Kit x 1
Quick Installation Guide x 1
STEP 4:
Connect the Ethernet (RJ-45) port to the networking device. See
the LNK/ACT LED to conrm that the connection is established.
The IMC-561P can be DIN-Rail-mounted or Wall-Mounted
(optional) in the cabinet or enclosure.
DIN-Rail-mounted with IMC-661P
Mounting Removing
6. Redundant Power Inputs
6.1. Safety rst
!
IMC-561P
The IMC-561P Unmanaged Industrial PoE Media Converter
is specically engineered to oer an aordable solution for
industrial network systems. Built to withstand wide operating
temperature from -10°C to 60°C, IP30 metal case, manufactured
with industrial components, Safety/EMI/EMS certied, Shock/
Freefall/Vibration approval, the media converter can operate
consistently even in harsh industrial environments.
The IMC-561P features 1 10/100/1000Base-T port and 1 100FX/
Gigabit SFP slot to satisfy new and evolving network
demands. With one IEEE 802.3af/at compliant port, the
device provides up to 30W per port to meet the growing
demand of higher power consuming network devices such
as wireless access points, IP cameras, and other powered
devices (PDs). Other than that, the IMC-561P features
intelligent functions like Auto MDI/MDI-X, LFS (Link Fault
Signalling), LLB (Line Loopback), LEDs, DIP switches etc. to
provide easy plug-and-play, continuous monitoring thereby
minimizing downtime for mission-critical networks.
STEP 3:
- Connect 48VDC Power Adapter to mini-DIN or connect
48~57VDC power properly to PWR & RPS (Terminal Block).
- Connect Alarm Relay output (ALM) to Alarm System.
5. Cabling RJ-45
The RJ-45 ports on the IMC-561P support auto negotiation and
auto MDI/MDI-X. This feature eliminates the worry of using
specic cable types.
Note: Category 5e cable or above should be used
Turn the power o before connecting modules or wires. The
correct power supply voltage is listed on the product label.
Check the voltage of your power source to make sure that you
are using the correct voltage. Do NOT use a voltage greater
than what is specied on the product label.
Calculate the maximum possible current in each power
wire and common wire. Observe all electrical codes dictating
the maximum current allowable for each wire size. If
current go above the maximum ratings, the wiring could
overheat, causing serious damage to your equipment.
DIP Switches
Power Input & Relay
Terminal Block
SFP
(100/1000Mbps)
Grounding
Screw
Power Input
mini-DIN
Wall Mount Kit
(Optional)
DIN Rail Kit
-4- -5- -6-
7. DIP Switch Setting
LLB
No
1
2
Label Description
Category: FUN (Function)
LFS
ON: LLB is enabled
OFF: LLB is disabled
ON: LFS is enabled
OFF: LFS is disabled
FX100
3 ON: Port 2 (SFP) speed at 100Mbps
OFF: Port 2 (SFP) speed at 1000Mbps
PWR
No
4
5
Label Description
Category: ALM (Alarm)
RPS
LFS
6 ON: Alarm for LFS issue is triggered
OFF: Alarm LFS is disabled
ON: Master power alarm reporting is enabled
OFF: Master power alarm reporting is disabled
ON: Redundant power alarm reporting is enabled
OFF: Redundant power alarm reporting is disabled
8. LED Indicators
Illuminated
O
Illuminated
O
PWR
(Green)
RPS
(Green)
Primary Power on
Primary Power o or failure
Redundant (Secondary) Power on
Redundant Power o or failure
Illuminated
O
ALM
(Red )
Alarm for following conditions
- LFS (Link Fault Signaling) alarm
- Power lost
Normal operation, no LFS alarm or
power lost issue
Copper port LED (10/100/1000Mbps)
Illuminated
O
PoE
(Green)
PoE power is delivered to PD device
No outgoing PoE power
Illuminated
O
1000
(Green)
Link speed at 1000Mbps
Link speed at 10/100Mbps
SFP LED (100/1000Mbps)
Illuminated
Blinking
O
SFP
(Green/
Amber)
Ethernet link-up
- Green: Speed 1000Mbps
- Amber: Speed 100Mbps
Activity (receiving or transmitting data)
Port disconnected or link failed
Illuminated
Blinking
O
LNK/ACT
(Green)
Ethernet link up
Activity (receiving or transmitting data)
Port disconnected or link failed
You can use either “mini-DIN” or “Terminal Block (PWR)”
for primary power and “Terminal Block (RPS)” for secondary
power source, to be a Redundant Power Input. Top views
of mini-DIN and Terminal Block are shown as picture.
Redundant Power Input: Choose either “mini-DIN” or
“Terminal Block (PWR)” as primary power. If you choose
“Terminal Block (PWR)”, please refer to option 1, unless
follow option 2.
Insert the “mini-DIN” connector into “mini-DIN” receiver
and “Terminal Block (RPS)” into terminal block receptor.
6.2. Wiring the Redundant Power Inputs
Option 2:
Insert the terminal block connector which includes
“PWR” and “RPS” into the terminal block receptor.
Option 1:
mini-DIN Terminal Block
If you discover a defect, VOLKTEK will, at its sole option, repair or
replace the product at no charge to you, provided that you
contact VOLKTEK technical support to obtain a Return
Merchandise Authorization Number (RMA) and instruction on
how and where repairs can be made.
This warranty does not apply if the product has been damaged by
accident, abuse, misuse, misapplication, neglect, re, water,
lightning or other acts of nature, failure to follow supplied
instructions, installation or removal, have been repaired or have
undergone attempted repair by unauthorized personnel without
written consent from VOLKTEK, modied, defaced, or has its serial
numbers removed. VOLKTEK reserves the right to use
remanufactured, refurbished, or used parts and components in
making warranty repairs.
Certain features of third-party software or hardware designed for
the host system may not be available when used with this
product. Accordingly, VOLKTEK does not warrant that hardware
or software will function error free when used in conjunction with
this product.
This warranty is in lieu of all other warranties, whether oral or
written, express or implied. All expressed or implied warranties for
this product, including the implied warranties of merchantability
and tness for a particular purpose are limited in duration to the
warranty period. No warranties expressed or implied will applied
after this period. VOLKTEK shall not be liable for lost prots,
damage to other property caused by any defects of this product,
or damages based upon inconvenience, loss of product use, loss
of time, commercial use, incidental and/or consequential damages
for the breach of any expressed or implied warranty, including
damages to property, and to the extent permitted by law, damages
for personal injury, even if VOLKTEK has been advised of the
responsibilities of such damages.
If you have any further questions, please contact Customer
Support:
LIMITED WARRANTY
VOLKTEK, a quality brand from VOLKTEK Corporation, warrants
this product against detect in materials and workmanship for a
period of FIVE (5) YEARS to the original purchaser.
Website: www.volktek.com
Email: [email protected]
Tel: +886-2-8242-1000
Fax: +886-2-8242-3333
6400-000111
Other VOLKTEK Media Converter manuals
