Vornado Breesi LS User manual

nursery air circulator
Own’s Handbk
read & save these important instructions
manual del propietario
lea y guarde estas instrucciones importantes
mode d’emploi
lire et conserver ces instructions importantes
Hola, me llamo Breesi LS, circulador de aire para salas de cuna.
Bonjour, je suis le Breesi LS, ventilateur de chambre de bébé.
with soothing light + sound
Breesi
Hello, i’m

2English
Welce to Vnadobaby
Vornado began in 1945, continues to revolutionize airflow today and is now tailored for the nursery.
®
A THIRD
genati
NAME
Thank you for choosing to put a Vornadobaby product in your nursery. Our
goal is to provide healthy, comfortable air - through every season. Vornado
has been doing this for quite a while now. We’ve brought all our experience in
air health and comfort, and tailored it exclusively for your nursery.

3
English
Español p. 18
Français p. 34
Important Instructions............................................................................. 4
Safety......................................................................................................... 6
Breesi LS Controls.................................................................................... 7
Plug In & Placement ................................................................................ 8
How To Use............................................................................................. 10
Keeping Breesi LS Clean ...................................................................... 12
Tips .......................................................................................................... 14
Troubleshoot .......................................................................................... 15
Warranty.................................................................................................. 16
Contents

4English
Please visually inspect all internal and external components be-
fore connecting to electric current. If any damage is found, DO
NOT USE THIS UNIT and contact Vornado Air LLC at
1-800-234-0604.
This appliance has a polarized plug. (One blade is wider than
the other.) To reduce the risk of electrical shock, this plug is
intended to fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not attempt to defeat this
safety feature.
WARNING – To reduce the risk of fire or electrical shock, do not
use this product with any solid state speed control device. To
reduce the risk of fire or electric shock and injury to persons, do
not use in a window.
This product employs overload protection (fuse). A blown fuse
indicates an overload or short-circuit situation. If the fuse blows,
unplug the product from the outlet. Replace the fuse as per the
user servicing instructions (follow product marking for proper
fuse rating) and check the product. If the replacement fuse
blows, a short-circuit may be present and the product should be
discarded or returned to an authorized service facility for exami-
nation and/or repair.
When using electrical appliances, basic precautions should
always be followed to reduce the risk of fire, electric shock, and
injury to persons, including the following:
- Read all instructions before using this circulator.
- Do use common sense when using this product and/or any
electrical appliance.
- Do unplug your circulator before cleaning.
- Do clean your Vornado Air Circulator regularly. Refer to the
CLEANING instructions provided. Never clean the air circula-
tor in any manner other than as instructed in this manual.
- Do Not use gasoline, thinners, solvents, ammonias or other
chemicals for cleaning.
- Do Not immerse this product in water or allow water to drip
into the motor housing.
- Do Not use near furnaces, fireplaces, stoves or other high-
temperature heat sources.
- Always unplug when not in use or when leaving the dwelling
or premises for extended periods of time.
- Do Not carry this product by the cord, or use the cord as a
handle.
- Do Not operate any circulator with a damaged cord or plug or
after the circulator malfunctions, has been dropped or dam-
aged in any manner. Discard circulator, or return to authorized
service facility for examination and/or repair.
- Do Not attempt to repair or replace parts.
- Do Not use outdoors.
- Do Not use this product on wet surfaces.
- Do Not use this product in a bathtub or shower.
- Do Not run cord under carpeting. Do not cover cord with
throw rugs, runners, or similar coverings. Do not route cord
under furniture or appliances. Arrange cord away from traffic
area and where it will not be tripped over.
- To disconnect circulator, turn controls to off, then remove plug
from outlet.
IMPORTANT
INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING.

5
English
- Do Not position this product too close to draperies because
they may be drawn into the rear grill, cutting off airflow.
- Use this circulator only as described in this manual. Any other
use not recommended by the manufacturer may cause fire,
electric shock, or injury to persons.
- Operate this circulator only in its upright position.
-Do Not use this circulator on a circuit that has a variable speed
device operating, such as a blender or a variable speed fan.
User Servicing Instructions
Grasp plug and remove from the receptacle or other outlet de-
vice. Do not unplug by pulling on cord. Open fuse cover (A.) by
sliding access cover on top of attachment plug towards blades.
Remove fuse carefully (B.) by gently prying out the ends of the
fuse from the receptacle. Risk of fire. Replace fuse only with 2.5
Amp, 125 Volt fuse. Contact Vornado customer service for re-
placement fuse. Phone: [phone], email:
[e-mail]
Install replacement fuse (C.) by first placing the end of the fuse
into the fuse receptacle which is opposite of the blades of the
plug, then carefully push in the other end. Only push against the
metal end of the fuse, not the glass center portion. Close the fuse
access cover (D.) by sliding the cover back into the plug until it is
completely closed, latches and is flush with the face of the plug.
Risk of fire. Do not replace attachment plug. Contains a safety
device (fuse, AFCI, LCDI) that should not be removed. Discard
product if the attachment plug is damaged.
Note: This equipment has been tested and found to comply with
the limits for Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable pro-
tection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the re-
ceiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) his device must accept
any interference received, including interference that may cause
undesired operation.
Industry Canada ICES-003 Compliance: CAN ICES-3
(B)/NMB-3(B)
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
READ AND SAVE THESE INSTRUCTIONS
A. B. C. D.

6English
Plug It In Safely! Your Breesi LS has a 6 ft. power cord is covered for additional safety. Vornado
recommends placing product as close to an outlet as possible and securing the remaining cord.
Safety
Finger Friendly Design
Resists curious fingers.
Covered Power Cord
Storage
Safely store power cord inside
base of Breesi LS.
No Pinch Points or
Sharp Edges
To help protect a tumbling
toddler.
No Exposure to
Mechanical Parts
360° of protection.
Locking Controls
Keep Breesi LS Off when
not in use or lock in your
desired settings.

7
English
Fan ( - Low, Medium, High)
Breesi LS Controls
Power ( )
Soothing Dimmable
Light ( )
Sound Soother ( )
Control Lock ( )
1
1
5
432
2
3
4
5

8English
Plug In & Placement
Power Cord Storage
For your convenience and safety the Power Cord
Storage keeps the power cord neat and out of
harms way.
1. Lift the Power Cord Storage flap to locate
plug, then unwind the power cord stored
inside.
Safety Tip: Power cords increase strangulation
risks. Secure as much excess cord as possible
inside the Power Cord Storage.
Power Cord
Storage flap

9
English
Set Up
1. Position your Breesi LS so the vortex beam of
air is directed across the room, unobstructed.
2. Plug power cord into standard wall outlet.
Safety Tip: It is best to position the Breesi LS
close to the power outlet and store excess power
cord inside the Power Cord Storage.

10 English
Fan
1. Press Power button On ( ). The control
panel will illuminate when On and dim after
approximately 20 seconds.
2. Select desired Fan ( ) setting. High speed ( ),
Medium speed ( ) or Low speed ( ).
3. Adjust the airflow direction by pivoting the
Breesi LS head.
Using Soothing Dimmable Light
1. Press the Soothing Dimmable Light button ( )
for a soft night time glow. Press the (+/-) button
to adjust between 5 levels of the brightness.
How To Use
Soothing
Dimmable Light
Area

11
English
Using Sound Soother
1. Press the Sound Soother button ( ) to cycle
through 4 sound options: White Noise,
Brookside, Froggy Night and Womb. Press the
(+/-) button to control the volume between 10
levels. To power sounds Off, continue to press
the Sound Soother button until it cycles Off.
Note: Previous control settings are kept for the
next time Breesi LS is powered On, unless Breesi
LS is unplugged.
Breesi LS features a child-resistant switch,
keeping the fan in parents’ desired setting.
Lockable Controls
1. To engage this feature press and hold the
Control Lock button ( ) for 3 seconds. The
Control Lock icon will blink 3 times rapidly to
show it is locked.
Note: The Control Lock icon will blink 3 times
slowly if any button is pressed while the Control
Lock is engaged. While this feature is engaged
you will not be able to change the settings or
Power Breesi LS On or Off. If Breesi LS is powered
Off, you may still engage the Control Lock.
2. To turn this feature Off press and hold the
Control Lock button ( ) for 3 seconds.

12 English
Cleaning the Grill
1. Power Breesi LS Off and unplug.
2. Using a Phillips Head screwdriver, remove the
screw located at the 6 o’clock position in the
front of the grill.
3. Twist Grill counterclockwise to unlock and pull
out.
4. Dust or vacuum the Grill and Blade.
Note: Do not use gasoline, thinners, solvents or
other chemicals for cleaning.
Keeping Breesi LS Clean
remove
screw
twist
counter-
clockwise
Always unplug Breesi LS before starting any part of the cleaning process.

13
English
5. Reinstall Grill. Replace Grill onto Breesi LS and
twist clockwise until the Grill aligns with the
screw hole. Replace screw.
Cleaning the Blade
It is possible to remove the blade should
something accidentally get wrapped around the
motor shaft.
1. First, remove the nut
from the shaft. Turn
the nut clockwise to
loosen. Pull the Blade
straight out from the
shaft.
2. When replacing, be
certain the flat side
of the shaft aligns directly
with the corresponding flat
side on the Blade’s socket.
Push the Blade all the way
on the shaft. Do not use a
hammer as this could result in
bearing damage. Reinstall nut
counter-clockwise until secure.
twist
clockwise
Always unplug Breesi LS before starting any part of the cleaning process.

14 English
Tips
• During the off-season or after extended
periods of non-use, you may choose to store
your Breesi LS. To ensure long life of the
product, it is recommended to store your
Breesi LS by following these instructions:
• Unplug power cord and wrap cord neatly
inside the Power Cord Storage.
• Thoroughly clean your Breesi LS. Use the
brush attachment on your household vac-
uum cleaner to vacuum any accumulated
dust on Breesi LS or wipe down the entire
surface with a soft cloth. You may also use a
can of compressed air for debris.
• Always set Power to Off and unplug Breesi
LS before cleaning.
• Cover, or place Breesi LS back into retail
carton if available. This will prevent Breesi
LS from accumulating dust over time.
• Store Breesi LS in a cool and dry location.
• The motor is permanently lubricated and re-
quires no oiling. Do not use gasoline, thinners,
solvents or other chemicals for cleaning.
• Your Breesi LS has no user serviceable parts.
Do not disassemble Breesi LS. This will void
your warranty. If service is required, return
your Breesi LS to Vornado (see WARRANTY for
instructions).
• Your night light uses an electroluminescent
element to create a soft, soothing glow.
The element may dim slightly over time
depending on frequency of use.

15
English
Unit is not plugged in. Plug Power Cord into electrical outlet.
Ensure unit fan speed setting is selected.
Plug fuse has blown. Replace fuse (See USER SERVICING INSTRUC-
TIONS on page 5).
Unit is damaged or in need of repair. Cease usage and unplug. Contact
Consumer Service for assistance.
The outlet is worn or damaged. Try another outlet or contact a qualified
electrician.
Unit set to a low speed setting. Adjust to a higher speed setting.
Airflow is blocked. Remove obstruction.
Adjust direction of airflow towards the user.
Unit fails to
power on.
Airflow is weak
or slow.
Troubleshoot