Vornado Whole Room Air Circulator User manual

READ AND SAVE THESE IMPORTANT INSTRUCTIONS
Whole Room Air Circulator Owner’s Guide
LEA Y TENGA EN CUENTA ESTAS INSTRUCCIONES IMPORTANTES
Guía del propietario del Circulador de Aire para toda la habitación
LIRE ET CONSERVER CES INSTRUCTIONS IMPORTANTES
Guide de l’utilisateur du ventilateur intégral de pièce
www.vornado.com
models VH102, 133, 160, 270,
360, 510, 530, 533, 573, 610, 630,
633, 660, 673, 679, 723, 733, 735,
743, 745, 753, 783, 795

2English
Designed, engineered and supported in Andover, Kansas.
Pensado, diseñado y respaldado en Andover, Kansas.
Conception, mise au point et soutien technique effectués à Andover, au Kansas.
Questions or comments?
¿Prequntas o comentarios?
Questions ou commentaires?
www.vornado.com
[email protected]
800.234.0604

3
English
Español p. 15
Français p. 27
Important Instructions ........................................................................ 4
Whole Room Circulation ..................................................................... 6
Features and Benefits ......................................................................... 7
Assembly............................................................................................. 7
How To Use ......................................................................................... 8
Grill Removal....................................................................................... 9
Blade Removal .................................................................................. 12
Cleaning and Maintenance ............................................................... 12
Troubleshooting ............................................................................... 13
Warranty............................................................................................ 14
Contents

4English
ature heat sources.
Do Not position this product too close to draperies because they
may be drawn into the rear grill, cutting off airflow.
Do Not use this product outdoors.
Do Not use this product on wet surfaces.
Do Not use this product in a bathtub or shower.
Do Not operate any fan with a damaged cord or plug. Discard fan
or return to an authorized service facility for examination and/or
repair.
Do Not carry this product by the cord, or use the cord as a handle.
Do Not attempt to repair or replace parts.
Do Not run cord under carpeting. Do not cover cord with throw
rugs, runners, or similar coverings. Do not route cord under furni-
ture or appliances. Arrange cord away from traffic area and where
it will not be tripped over.
Do use common sense when using this product and/or any electri-
cal appliance.
User Servicing Instructions
Grasp plug and remove from the receptacle or other outlet device.
Do not unplug by pulling on cord. Open fuse cover (A.) by sliding
access cover on top of attachment plug towards blades. Remove fuse
carefully (B.) by gently prying out the ends of the fuse from the recep-
tacle.
Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.
This appliance has a polarized plug. (One blade is wider than the
other.) To reduce the risk of electrical shock, this plug is intended to fit
in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified elec-
trician. Do not attempt to defeat this safety feature.
WARNING – To reduce the risk of fire or electrical shock, do not use
this product with any solid state speed control device. To reduce
the risk of fire or electric shock and injury to persons, do not use in a
window.
This product employs overload protection (fuse). A blown fuse indi-
cates an overload or short-circuit situation. If the fuse blows, unplug
the product from the outlet. Replace the fuse as per the user servicing
instructions (follow product marking for proper fuse rating) and check
the product. If the replacement fuse blows, a short-circuit may be
present and the product should be discarded or returned to an autho-
rized service facility for examination and/or repair.
Do unplug your circulator before cleaning.
Do clean your Vornado Air Circulator regularly. Refer to the CLEAN-
ING instructions provided. Never clean the air circulator in any man-
ner other than as instructed in this manual.
Do Not use gasoline, thinners, solvents, ammonias or other chemi-
cals for cleaning.
Do Not immerse this product in water or allow water to drip into
the motor housing.
Do Not use near furnaces, fireplaces, stoves or other high-temper-
IMPORTANT INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING.

5
English
Contact Vornado customer service for replacement fuse.
Phone: [phone], email: [email protected]
Install replacement fuse (C.) by first placing the end of the fuse into
the fuse receptacle which is opposite of the blades of the plug, then
carefully push in the other end. Only push against the metal end of
the fuse, not the glass center portion. Close the fuse access cover (D.)
by sliding the cover back into the plug until it is completely closed,
latches and is flush with the face of the plug. Risk of fire. Do not re-
place attachment plug. Contains a safety device (fuse, AFCI, LCDI)
that should not be removed. Discard product if the attachment plug is
damaged.
Models 660 & 270 only
Note: This equipment has been tested and found to comply with the
limits for Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
A. B. C. D.
IMPORTANT INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING.
harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) his device must accept any interference
received, including interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003. Cet
appareil numérique de la classe B est conforme à la norme NMB-003
du Canada.
SAVE THESE INSTRUCTIONS

6English
Whole Room Circulation
Maximize your cooling efficiency.
Typical Fan Vornado Air Circulator
A Vornado circulates all the air in the room so everyone
is comfortable. Air in motion feels cooler than air that is
stagnant. By providing whole room circulation, a Vornado
allows you to turn the thermostat up 5º F - saving energy
and money - without sacrificing comfort.
Trust.
It is said that trust isn’t given, but earned. For decades Vornado has
been earning the trust of our customers by offering them only the
best. Vornado provides the highest level of performance, coupled
with the highest level of support available. Complete satisfaction
with no exceptions – this is Vornado’s promise to you. If you are
not satisfied for any reason, please contact us. Knowledgeable
representatives are available at 1-800-234-0604 from 7:00 AM to 6:00
PM CST. A wealth of additional support is also available online at
www.vornado.com. On behalf of myself and the entire staff at our
Andover, Kansas headquarters – thank you for selecting Vornado.
Sincerely,
Bill Phillips
CEO, Vornado Air
Find our complete product line at www.vornado.com

7
English
Features and Benefits
Installing Protective Feet
Use the feet to protect floors when using your air circulator on uncarpeted
surfaces such as hardwood, vinyl, or tile. The feet are simple to install and will
help maintain the whisper-quiet operation.
Cushion Ring Feet
(Models 723, 745, 783 and 795 only)
The cushion ring feet are packaged separately
in the box. To install, roll or clip all feet onto the
base and space evenly. For balanced support it
is recommended to use 4 ring feet.
Cushion Pads
(Model 733 and 735 only)
Use guide marks on base bottom for location.
1. Place 4 pads over the 4 edge bends.
2. Place 2 pads on each of the curved ends.
Base Assembly
(Model 743 only)
1. Align the pins (A) located on each base
piece and insert into the holes (B) on each
base piece.
2. Align and insert pivot knob (C) into hole
located on the base (D).
3. Place rubber washer (E) onto pivot knob.
Then screw pivot knob into the head of unit
(F) until secure. Repeat on opposite side of
the base.
Benefit
With multiple speeds, any circulation need will be met.
To turn on unit - rotate knob one position clockwise.
Turn the knob clockwise to decrease airflow. Turn coun-
terclockwise to increase airflow. On models equipped
with push button speed controls: Press Power, then select
speed.
Provides movement of air at any angle–up stairs, down a
hallway, room to room and everywhere in between.
Models V102, 270, 573, 673 and 679 provide movement
of air in two positions - vertically or horizontally.
Saves energy by maximizing the performance of heating
and cooling systems. When you use a Vornado Air
Circulator, you will not have to set your summertime
thermostat as low or your wintertime thermostat as high.
(Model 783 and 795 only)
28” or 40” heights make this model perfect for out-
of- the-way placement behind furniture and office fur-
nishings. The extension tube must be used to achieve
the 40” height. To shorten the height of the circulator,
remove the extension tube. (See the Adjustable Height
assembly instructions in the shipping carton.)
72
Multiple Speeds
Directable Airflow
Energy Savings
Adjustable Height
Feature
²² ²
²
²²
²²
Assembly
²
²
²
²
C
D
E
F
A
B

8English
Getting Started
1. Position your Air Circulator so the beam of air has an unobstructed
path from one side of the room to the other.
2. Set speed to medium and allow a few minutes for an airflow pattern
to be established. (Different airflow patterns can be established by
changing the location, angle and speed of the Air Circulator.)
3. Adjust the speed accordingly until a desired comfort level is
achieved. You will quickly determine the precise amount of circula-
tion required to maintain your personal comfort in a given room
for the prevailing temperature and humidity conditions. Once you
discover the added comfort of air circulation, you will use your
Vornado Air Circulator season after season.
Where to Use
Ideal Rooms
Kitchen, Smaller Bedroom, Dorm Room, Office Cubicle
Den, Home Office, Hearth Room, Dining Room, Average
Bedroom
Living Room, Master Bedroom, Family Room, Recreation
Room Workshop/Hobby Room, Sunroom
Air Circulator
100, 300 and
500 series
600 series
660, V102, 270
and 700 series
When To Use – Saves Energy Year-Round
Summer: Use your Air Circulator with your home’s air conditioning system to
create brisk, comforting air movement. This breeze will eliminate stagnant air
and remove body heat to make you feel cooler.
With Vornado Air Circulators, you can save money on energy bills by raising
your thermostat several degrees and still maintaining the same comfort level.
Use with central
or window air
conditioning
Push cool air
up stairs
Spring & Fall: Your Air Circulator can make the indoors as fresh and pleasant
as the outdoors. Place the Air Circulator near an open window, sliding door or
French door to take full advantage of mild temperatures and seasonal breezes.
Circulate fresh
outdoor air
Even room
temperature
Winter: Position your Air Circulator in a place with unobstructed upward air
movement. Run it only as fast as necessary to lower the heated air from the
ceiling – but not fast enough to create a draft. Or, use your Air Circulator with
other available heat sources (furnace vents, wood stoves or baseboard heat-
ers) to circulate their warmth, taking full advantage of all available heat in the
room. Do not point the Air Circulator at open flames.
Increase the
efficiency of
heating sources
Replace cold
floor air with
warm ceiling air
How To Use

9
English
Grill Removal
Models 533, 633, 753 • Remove the 3 screws located in between the ribs
of the inlet grill at roughly 10, 2, and 6 o’clock positions. Screw locations are
indicated by an arrow on the side of air inlet (B). Do Not remove the 2 screws
on the pivot arms. Place the circulator facing you. Position your hands at the
10 and 2 o’clock positions, lift up and back on the outer grill to release the grill
clips (C). If necessary repeat the process against the remaining two clips at
the 5 and 7 o'clock positions. Replace by lining up the clips with the holes and
firmly snapping the grill back into place. Replace all the screws.
²
² ²
² ²
² ²
B
C
WARNING: To avoid risk of fire, electrical shock, or injury to persons, unplug
the Air Circulator before removing the grill.
Models 510, 530, 610, 630, 723, 733, 743, 783, 735, 745, 795 • Remove
the screw (only necessary on model 530). Depress one of the grill clips (A) by
placing your thumb against the outside surface of the clip and pressing down-
ward towards the motor, applying slight pressure forward. A flathead screw-
driver can also be used if the clips are difficult to release. Usually by releasing
one clip, the grill can be removed. If the grill cannot be removed, repeat the
process on remaining clips. Replace by lining up the clips with the holes and
firmly snapping the grill back into place. Replace the screw (model 530 only).
²
A
Screw
(530 only)

10 English
Model 360 • The grill on your model will be able to be removed in one of two
ways. Check the back of your unit to see how many screws your unit has and
follow the appropriate instructions.
Instruction A •Feel for bumps on back of product, close to inlets, that help to
locate screws at roughly 12, 3, 6 and 9 o'clock positions. Remove the 4 screws
located at these positions, releasing the grill. To reattach – position grill so the
logo in the center of the grill is straight and replace screws.
Instruction B • Remove the 2 screws located in between the ribs of the inlet
grill at roughly 9 and 3 o’clock positions, releasing the grill. To reattach – po-
sition grill so the logo in the center of the grill is straight and replace the 2
screws.
²
²
²
²
Grill Removal
Model 133 • Remove the 4 screws located at the back at the outer most edge
of the inlet grill at roughly 2, 5, 7 and 11 o'clock positions, releasing the grill.
To reattach - position the grill so the logo in the center of the grill is straight
and replace screws.
Model 160 •Remove the 4 screws located in between the ribs of the inlet grill
at roughly 12, 3, 6 and 9 o’clock positions, releasing the grill. To reattach – po-
sition grill so the logo in the center of the grill is straight and replace screws.
²
²
²
²
² ²
²
²
²
²
²