Vornado iControl User manual

model iControl
READ AND SAVE THESE INSTRUCTIONS
Whole Room Heater Owner’s Guide
LEER Y GUARDAR ESTAS INSTRUCCIONES
Guía del propietario el calentador para ambientes
www.vornado.com

2English
Designed, engineered and supported in Andover, Kansas.
Questions or comments?
¿Prequntas o comentarios?
www.vornado.com
[email protected]
800.234.0604
Pensado, diseñado y respaldado en Andover, Kansas.

3
English
Español p. 12
Important Instructions ........................................................................ 4
Vornado Vortex Action ....................................................................... 6
Controls............................................................................................... 7
How To Use
Getting Started............................................................................... 7
Resetting Your Vornado Heater...................................................... 8
Advanced Safety Features.................................................................. 8
Cleaning and Storage
How To Clean.................................................................................. 9
Storage............................................................................................ 9
Operating Tips .................................................................................... 9
Troubleshooting ............................................................................... 10
Warranty............................................................................................ 11
Product Specifications ...................................................................... 21
Contents

4English
Please visually inspect all internal and external components before
connecting to electric current. If any damage is found, DO NOT USE
THIS UNIT and contact Vornado Air LLC at 1-800-234-0604.
This product is equipped with a 3-prong plug, with a grounding pin
as a safety feature. To reduce the risk of electric shock, this plug is
intended to connect to properly grounded outlets only. This plug will
fit into a grounded outlet only one way. Do not alter the plug. Do not
attempt to defeat this safety purpose of the grounding plug.
When using electrical appliances, basic precautions should always be
followed to reduce the risk of fire, electric shock, and injury to persons,
including the following:
Read all instructions before using this heater.
This heater is hot when in use. To avoid burns, do not let bare skin
touch hot surfaces. Use handles when moving this heater. Keep
combustible materials, such as furniture, pillows, bedding, papers,
clothes, and curtains at least 3 feet (0.9 m) from the front of the
heater and keep them away from the sides and rear.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to
ensure that they do not play with the appliance. Extreme caution is
necessary when any heater is used by or near children or invalids and
whenever the heater is left operating and unattended.
Always unplug heater when not in use.
Do not operate any heater with a damaged cord or plug or after the
heater malfunctions, has been dropped or damaged in any manner.
Discard heater, or return to authorized service facility for examination
and/or repair in order to avoid a hazard.
Do not use outdoors.
This heater is not intended for use in bathrooms, laundry areas and
similar indoor locations. Never locate heater where it may fall into a
bathtub, swimming pool or other water container.
Do not run cord under carpeting. Do not cover cord with throw rugs,
runners, or similar coverings. Do not route cord under furniture or
appliances. Arrange cord away from traffic area and where it will not
be tripped over.
To disconnect heater, turn controls to off, then remove plug from
outlet.
Do not insert or allow foreign objects to enter any ventilation or
exhaust opening as this may cause an electric shock or fire, or
damage the heater.
To prevent a possible fire, do not block air intakes or exhaust in any
manner. Do not use on soft surfaces, like a bed, where openings may
become blocked.
A heater has hot and arcing or sparking parts inside. Do not use it in
areas where gasoline, paint, or flammable liquids are used or stored.
Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock, or
injury to persons.
Always plug heaters directly into a wall outlet/receptacle. Never use
with an extension cord or relocatable power tap (outlet/power strip).
IMPORTANT INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS HEATER.

5
English
Operate this heater only in its upright position.
Do not operate this heater on an elevated surface such as a shelf or
desktop. Use only while placed on the floor.
This heater is equipped with a thermal safety shut-off system,
designed to turn off the heater when an internal overheating
condition is detected (see How To Use “RESETTING YOUR
VORNADO HEATER,” to determine how to check and reset the
heater).
Do not use this heater on a circuit that has a variable speed device
operating, such as a blender or a variable speed fan.
Do not use heater to dry human or animal hair/fur or articles of
clothing.
This product must be grounded. If the product malfunctions,
grounding provides a path of least resistance for the electric current
to reduce the risk of electric shock. The 3-prong plug must be
inserted into a grounded outlet that has been properly installed
in accordance with all electric codes and ordinances. If you are in
doubt as to whether or not an outlet is properly grounded, contact a
qualified electrician.
This heater operates with an infrared remote control. Interference
between this remote and other remote-control-operated electrical
appliances in your home is possible.
CAUTION: In order to avoid a hazard due to inadvertent resetting of
the thermal cutout, this appliance must not be supplied through an
external switching device, such as a timer, or connected to a circuit
that is regularly switched on and off by the utility.
This heater is for use on 120 volts. The cord has a plug as shown at A
in Figure 65.1. An adapter as shown at C is available for connecting
three-blade grounding-type plugs to two-slot receptacles. The green
grounding lug extending from the adapter must be connected to
a permanent ground such as a properly grounded outlet box. The
adapter should not be used if a three-slot grounded receptacle is
available.
Do not use this heater in an RV, a boat, or in any application where a
DC/AC converter is converting battery power to AC power.
Do not use the heater on any Ground-Fault Circuit Interrupted (GFCI)
circuit. A GFCI circuit has a reset button in the middle of the outlet.
Do not use this heater on a surge protected circuit.
Do not use the heater with any kind of timer to turn the unit on or off.
Do not use this heater on a circuit that is shared with a high power
device, such as a vacuum or a circular saw.
CAUTION: A loose fit between the outlet (receptacle) and plug may
cause overheating and distortion of the plug. Discontinue use of
the product. Contact a qualified electrician to replace loose or worn
outlet.
Figure 65.1
SAVE THESE INSTRUCTIONS
IMPORTANT INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS HEATER.

6English
Ordinary heaters provide only localized heat. Heat immediately rises
to the ceiling, resulting in cold and hot spots in the room. Vornado’s
unique Vortex Action delivers continuous, uniform heat surrounding
everyone in the room in a warm, comfortable temperature.
Ordinary Heater
Without Adequate
Heat Circulation
Vornado Whole
Room Heater
With Signature
Vortex Heat
Circulation
72º
72º
62º
72º
82º
82º
82º
Vornado®Vortex Action
Trust.
It is said that trust isn’t given, but earned. For decades Vornado has
been earning the trust of our customers by offering them only the
best. Vornado provides the highest level of performance, coupled
with the highest level of support available. Complete satisfaction
with no exceptions – this is Vornado’s promise to you. If you are
not satisfied for any reason, please contact us. Knowledgeable
representatives are available at 1-800-234-0604 from 7:00 AM to 6:00
PM CST. A wealth of additional support is also available online at
www.vornado.com. On behalf of myself and the entire staff at our
Andover, Kansas headquarters – thank you for selecting Vornado.
Sincerely,
Bill Phillips
CEO, Vornado Air
Find our complete product line at www.vornado.com

7
English
Getting Started
Using your Vornado Heater is easy. Just follow these simple
steps.
1. Position your heater so the vortex beam of warm air is
directed across the room, unobstructed. Position it in a
location that is representative of the room temperature.
Avoid areas of temperature extremes such as cold drafts and
heat registers. Please refer to IMPORTANT INSTRUCTIONS
at the beginning of this owner’s guide.
2. Plug power cord into a standard grounded wall outlet.
3. Press the Power button.
4. One-Knob Operation
This innovative user interface is sophisticated yet simple.
Press the knob to “wake-up” or turn on the screen on the
base unit, rotate the One-Knob control unit until the desired
mode you want to adjust is displayed. Press the button to
accept this mode, then, rotate the knob left or right to select
desired setting. The unit is then set, or you may press the
One-Knob again to adjust another mode, and continue to
adjust additional settings in the same manor.
5. Remote Control
Fully control the Heater remotely with the Remote, no more
getting up to adjust the temperature. You can turn the unit
On and Off switch the mode from Fan Only, to Low Heat or
High Heat, adjust the desired set temperature up or down,
and set the automatic-off timer. As you adjust the remote,
the base unit will “beep” to indicate that it has received your
signal.
How To Use
1
2
3
4
6
5
7
Power On/Off
Front light illuminates when power
is on.
Mode
HIGH HEAT 1500 watts, LOW
HEAT 750 watts, or FAN ONLY.
Temperature
Allows you to select your desired
comfort level. Use the UP arrow
to raise the set temperature. Use
the DOWN arrow to lower the set
temperature.
Timer
The timer can be set in hour
intervals up to 9 hours. Press the
TIMER button to go into timer
mode. In timer mode, use the
UP arrow to add hours. In timer
mode, use the DOWN arrow to
remove hours.
Remote
The remote control functions
the same as the unit controls.
The remote requires 1 coin style
battery. To replace the battery
remove the cover located on the
bottom side of the remote.
Sound
When a setting is changed you will
hear a “beep” from the unit.
LCD Display
Dims for no-glow night operation.
1
2
3
4
5
Controls

8English
Grounded Heavy-Duty Power Cord
Adds durability and a more secure wall connection.
Tight Grill Spirals
Resists curious fingers.
Cool Touch Case
Safe to touch, even on high heat setting.
Automatic Safety Shut Off System
If airflow becomes blocked and overheating occurs,
power to the heating element and fan is shut off.
Tip-Over Switch Protection
If tipped more than 10 degrees in any direction, heat
and fan functions immediately shut down.
Ideal 120°F Exit Air Temperature
Warm enough to heat an entire room.
Resetting Your Vornado Heater
Your Vornado Heater has a multi-level safety shut-off system
designed to prevent overheating. Overheating may occur when
the inlets or outlet are blocked, a foreign object prevents the
blade from turning, or the appliance tips over. If this happens,
the safety shut-off system will cut power to the heat element
and you will need to manually reset the heater.
1. Set the Power switch to Off and unplug the unit.
2. Remove any obstructions.
3. Wait 5 –10 minutes, allowing the unit to cool down.
4. Plug in the unit and place in desired position.
5. Set the Power switch to On. Your Vornado Heater should now
function normally.
Note: If the safety shut-off system repeatedly shuts off your
heater or if it will not reset after following the above procedure,
DO NOT ATTEMPT TO DISASSEMBLE THE UNIT. Call Vornado
Consumer Services Department toll-free at 1-800-234-0604.
Advanced Safety FeaturesHow To Use

9
English
How to Clean
Your heater has no user serviceable parts. Do not disassemble the
unit. This will void your warranty. If service is required, return your
heater to Vornado (see WARRANTY for instructions).
The motor is permanently lubricated and requires no oiling.
Because your heater moves a substantial
amount of air, it will need regular cleaning.
To clean follow these simple instructions:
1. Unplug the unit.
Note: Do not use gasoline, thinners, sol-
vents or other chemicals for cleaning.
2. Use the brush attachment on your
household vacuum cleaner to vacuum
any accumulated dust off the Front Angled Outlet Grill and Side
Inlet Grill. Wipe down the entire surface with a soft cloth.
Note: Vacuuming the outside of the heater is recommended on a
bi-weekly basis. You may also blow the heater out with high pressured
air. This can be purchased from your local hardware store.
Storage
During the off-season or after extended periods of non-use, you may
choose to store your heater. To ensure long life of the product, it is
recommended to store your heater by following these instructions:
1. Unplug power cord and bundle loosely.
2. Thoroughly clean your heater (see instructions above).
3. Cover, or place back in retail carton if available. This will prevent
the unit from accumulating dust overtime.
4. Store unit in a cool and dry location.
Cleaning and Storage
View how to clean your
Vornado heater on your
mobile device.
 In smaller areas, you might prefer to set the unit in LOW mode. A
vortex beam of air will gently keep the air circulating in the room
for even, uniform heating.
 In larger spaces, you might prefer to set the unit in HIGH mode. A
vortex beam of air will gently keep the air circulating in the room
for even, uniform heating.
 To use the iControl as a personal fan, set the unit to FAN mode.
 The iControl, like any other 1500-watt electric heater, draws up to
12.5 amps of electric current. If using your iControl on HIGH setting
causes your home circuit breaker or fuse to trip, we offer the
following suggestions:
 Try turning off other electrical appliances that run on the same
circuit as your heater.
 Run your heater in LOW mode.
 Have your electrician add an additional circuit to your home’s
electrical system.
 When the room temperature is higher than the set temperature it
is normal and correct to have little to no heat coming out of the
iControl. When the unit is first turned on there is a slight delay
before heat will start to be produced.
 ALWAYS USE COMMON SENSE WHEN USING THIS AND/OR
ANY ELECTRICAL APPLIANCE.
 Do not use more than one heater at a time.
 Never ignore or take lightly the signs of an electrical problem, such
as:
 Warm outlet cover plates
 Sparking at outlet when plugging in or during operation
 Light flickering or dimming (indicates a shared circuit or
problem)
Investigate the cause of these before continuing to use the heater.
Operating Tips

10 English
Troubleshooting
Unit is not plugged in. Plug Power Cord into electrical outlet.
Household circuit breaker / ground fault interrupter has tripped or blown a fuse. Reset circuit breaker /
ground fault interrupter, or replace fuse (See OPERATING TIPS).
The unit has overheated. Automatic Safety Shut-Off has initiated (See RESETTING YOUR VORNADO HEATER).
Unit is damaged or in need of repair. Cease usage and unplug. Contact Consumer Service for assistance.
Ensure unit is set to High Heat and thermostat is set to highest Temperature setting.
Close all doors and windows to trap heat.
Allow the unit to fully circulate the heat throughout the room, may take several minutes.
Power off and unplug the unit. On the bottom of the unit, there is a black disk. Push in 4-5 times ensuring it
is not stuck. Set unit down on flat surface. Be sure power cord is not under unit. Plug unit in and power on.
Turn to highest heat setting.
Unit fails to power on.
Unit is not producing
sufficient amount of heat.
Unit power on but there
is no heat.
Problem Possible Cause and Solution

11
English
Whole Room Heater • 5 Year Limited Warranty
Vornado Air LLC (“Vornado”) warrants to the original consumer or purchaser this
Vornado®Whole Room Heater (“Product”) is free from defects in material or workmanship
for a period of five (5) years from the date of purchase, depending on model. If any such
defect is discovered within the warranty period, Vornado, at its discretion, will repair or
replace the Product at no cost. Repairs not covered by the warranty or outside the warranty
period will require a fee to cover the cost of materials, labor, handling and shipping.
This warranty does not apply to defects resulting from abuse of the Product, modification,
alteration, repair or service of the Product by anyone other than Vornado, mishandling,
improper maintenance, commercial use of the Product, damages which occur in shipment
or are attributed to acts of God.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER. VORNADO SHALL NOT BE LIABLE FOR ANY INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED
WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE
LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS
WARRANTY.
Some states do not allow the exclusion or limitation of incidental or consequential dam-
ages, or allow limitations on how long an implied warranty lasts, so the above limitations or
exclusions may not apply to you. This warranty gives you specific legal rights, and you may
have other rights that vary from state to state.
For warranty or repair service, call 1-800-234-0604 or email
[email protected] to obtain a Return Authorization (“RA”) form. Please have
or include your Product’s model number and serial number, as well as your name, address,
city, state, zip code and phone number when contacting Vornado for warranty service.
After receiving the RA form, ship your Product to:
Vornado Air LLC
Attn: Warranty & Repair
415 East 13th Street
Andover, KS 67002
For your convenience, please have your model number and serial number when contact-
ing Vornado with service inquiries. To assure proper handling, packages must be clearly
marked with the RA number. Packages not clearly marked with the RA number may be
refused at the receiving dock.
Please allow 1-2 weeks for repair and return of your Product after the Product is received.
For your records: Staple or attach your original sales receipt to this Owner’s Guide. Please
also write your products’s serial number below (located on product specs decal).
Serial No. ______________________________________
Product registration available online at www.vornado.com
© 2014 Vornado Air LLC Andover, KS 67002
Patents Pending. Specifications subject to change without notice.
Vornado®is a trademark owned by Vornado Air LLC.
Assembled, designed and supported in the U.S.A.
www.vornado.com [email protected] 800.234.0604

CL3-0156 RC
CL7-0156 RC, V01
Speak your mind www.vornado.com/reviews
Hable con franqueza www.vornado.com/reviews
Vornado Air, LLC
415 East 13th Street, Andover, Kansas 67002
800.234.0604 │www.vornado.com