Voxoa T80 User manual

User Manual
使用說明書
T80
Direct-Drive
Turntable
直驅式黑膠唱盤
DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 1DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 1 2012/10/3 下午 04:46:312012/10/3 下午 04:46:31

DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 章節1:2DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 章節1:2 2012/10/3 下午 04:46:542012/10/3 下午 04:46:54

T80T80
3
Contents
ENGLISH
中文
IMPORTANT SAFETY INSTRUCTIONS ............................................................................. 10
SPECIFICATIONS & ACCESSORIES SUPPLIED ................................................................. 12
PART NAMES AND FUNCTIONS ....................................................................................... 13
OPERATING ................................................................................................................ 15
重要安全指示 ....................................................................................................... 04
規格和配件 ..................................................................................................... 06
部件名稱與功能 .................................................................................................... 07
操作 .................................................................................................................... 09
DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 章節2:3DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 章節2:3 2012/10/3 下午 04:46:542012/10/3 下午 04:46:54

4
中
文
1. 閱讀說明書 - 操作本產品前應先閱讀所有安全性及操作說明。
2. 保留說明書 - 安全性及操作說明應妥善保存供未來參考用。
3. 留心警告 - 所有在本產品及操作說明上的警告都要遵守。
4. 參照說明書 - 需參照所有操作及使用說明。
5. 水和濕氣 - 在操作本產品時絕對不要靠近水-例如靠近浴缸、臉盆、洗碗槽、洗衣盆、游泳池、及在潮濕
地下室等等。禁止將装有液体的容器，例如花瓶，酒瓶等至於本產品上。
6. 移動平台及固定檯面 - 本產品只能使用在製造商所建議的移動平台及固定檯面。本產品與移動平
台的組合在移動時應特別注意。突然地停止，過大的外力及不平衡的表面，都會造成本產品在移
動平台上翻覆。
7. 牆壁或天花板架置 - 本產品應只參照製造商所建議的方式來架置在牆壁或天花板上。
8. 高溫 - 本產品應遠離熱氣來源，例如散熱器、暖器、火爐或者其他會產生高溫的用品(包含擴大機)。
9. 電源 - 本產品只能照電壓標籤所示來操作。如果你不確定你住家的電源的種類，請諮詢你的產品賣家或當
地電力公司。若本產品需要用電池或其他電源，請參照操作說明書。
10. 接地與電極 - 本產品可能供給極化交流電插頭。插頭只有一個方向插入插座。這是一個安全裝置，如果沒
辦法完全插入插座，請試著把插頭反方向。如果插頭仍無法插入插座，請連絡電工來更換插座，請勿毀
損安全性為考量的插頭。
11. 電源線的保護 - 電源供應線應該妥善規劃佈線的路徑，避免被其他物件所纏繞。應特別注意所使用的插座
是否與電源供應線的插頭吻合，這插座要靠近本產品的使用地點。
12. 清潔 - 本產品須依照製造商所建議的方式做清潔。清潔本產品應使用柔軟的乾布清潔。
13. 交流電供電零件 - 維修完成後在交還產品給使用者前，應使用電阻測量表測量交流電插頭及所有暴露在外
的金屬零件，電阻值應大於100k歐姆。
14. 長時間未使用 - 本產品在長時間未使用的狀況下，應將插頭拔除。
15. 物體及液體進入 - 小心不要讓物體掉入及液體流進本產品裡。
16. 損壞需求服務 - 當A.電源線或插頭已經毀損；或B.異物或液體掉進本產品；或C.本產品暴露在雨中；或
D.操作或功能不正常；或E.本產品被摔落或內部損壞時，應送回合格的服務人員處進行維修。
17. 售後服務 - 除了操作說明書所提到的正常操作外，使用者不應進行其他不當操作或試圖自行維修。當本產
品有問題時應請教合格的維修服務人員或送回合格的維修站進行維修服務。
重要安全指示
DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 章節2:4DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 章節2:4 2012/10/3 下午 04:46:552012/10/3 下午 04:46:55

T80T80
5
中
文
18. 保持本產品在空氣流通的環境中 - 本產品上的散熱孔提供流通的空氣，以避免本產品在操作時產生過熱的
現象。這些為保持本產品空氣流通的散熱孔嚴禁被阻隔或被其他物品覆蓋。特別是較柔軟的表面，例如
床，沙發及地毯等等。本產品不應被安裝在內建的空間內，例如書櫥及架子，除非能夠依製造產商所規範
的空氣流通指示建構。
19. 連接安裝 - 請勿安裝非本產品製造商所建議的連接器材，以避免本產品遭受害。
20. 配件 - 請勿將本產品放置在不穩定的移動推車，三角架，支撐架或桌子上。本產品可能會掉落因而使小孩
或是成人受傷，並且本產品會受到嚴重的損害。只能使用製造商所建議的移動推車，三角架，支撐架或桌
子，或是與本產品一起銷售的配件。必須依製造商指示安裝本產品，並且安裝的配件必須使用製造商所建
議的。
21. 閃電 - 為保護本產品在風雨期間不受到閃電的影響及侵害，當本產品長時間不使用時將插頭拔除，並拆除
天線。這將保護本產品免於受到閃電及電源突然增加的損害。
22. 替換零件 - 當需要替換零件時，請確保維修技術人員使用製造商所指定的零件或是與原零件具有相同特性
的替代品。未經授權的替代零件會導致過熱著火，電磁衝擊或其他嚴重的損害。
23. 安全性檢查 - 本產品在進行維修或任何服務時，請要求維修服務人員進行安全性檢查，以確保本產品在正
確地操作狀況下。
重要安全指示
警 告
嚴禁本產品暴露在下雨及潮濕的環境之中，以降低起火及觸電的危險。本產品避免暴露在會滴水及會濺到
水的環境中。裝有液體的容器絕對禁止放在本產品上，例如酒瓶，花瓶等等。
注 意
為了杜絕觸電的危險，請勿使用不合規格的插座。應使用插頭能夠完全插入插座的插孔。
注意:嚴禁打開機蓋以降低觸電的風險。維修及更換零件請諮詢維修中心
合格的維修工程師。
三角形中有個驚嘆號是為了提醒使用者重要的操作及維護指示。
三角形中有個箭頭的閃電標誌是為了警告在產品內部因未絕緣而可能產生的高壓電，這高壓電會
造成觸電的危險。
DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 章節2:5DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 章節2:5 2012/10/3 下午 04:46:562012/10/3 下午 04:46:56

6
中
文
規格和配件
唱盤部份 :
• 手動三段速
• 馬達：16極、3相位馬達
• 驅動方式：直接驅動
• 圓盤：直徑332公釐，鋁鑄圓盤
• 播放速度：33 1/3 及 45 及 78rpm
• Wow and flutter : 速度33 1/3 rpm時低於0.1%
WRMS (JIS WTD)
• 信噪比：大於55dB (DIN-B)
• Pitch控制：+/- 10%, +/- 20%, +/-50%
• 電子式煞車
• 啟動扭力：大於4.5kgf.cm
• 啟動時間： 0.2~6秒 (可依需求調整)
• 煞車時間： 0.2~6秒 (可依需求調整)
• 速度切換所需時間
- 從33 1/3 切換到45 rpm低於0.2秒
- 從45 切換到33 1/3 rpm低於0.2秒
- 從33 1/3切換到78 rpm低於0.5秒
唱柄部份 : (Cartridge: AT-3600L)
•種類：S型唱柄
•可使用唱柄長度：230公釐
•循軌錯誤角度：少於3度
•防滑範圍：0~3公克
•合適的唱頭重量：13~18公克 (包括前座)
•輸出：1.5~3.6mV at 1KHz 5cm/sec (HP-4005)
•頻率響應：20Hz~20KHz
•頻道分離度: 大於15dB
•頻道平衡: Within 2.5dB at 1KHz
•Tracking Force調整範圍：3~4g
聲音部份：
•等化器. RIAA 特性 50Hz~20KHz+0.5/-1dB
•唱盤輸出電頻 1.5~3.6mV at 1KHz 5cm/sec
(HP-4005)
•線性輸出電頻 90~216mV at 1KHz 5cm/sec
(HP-4005)
•信噪比 ≧60dB (1KHz,4mV INPUT)
一般規格 :
• 電源供應: AC 220V, 50Hz
• 電源消耗量：13瓦特
• 尺寸：450 (W) x 353 (D) x 156 (H) mm
• 重量：12.2公斤
配件 :
- 1 平衡錘
- 1 照明燈
- 1 唱柄前座
- 1 轉盤
- 1 45 rpm 接合器
- 1 滑墊
- 1 電源線
- 1 連接線
- 1 防塵蓋
- 1 使用手冊
DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 章節2:6DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 章節2:6 2012/10/3 下午 04:46:572012/10/3 下午 04:46:57

T80T80
7
中
文
部件名稱與功能
7. 啟動播放鍵START/煞車鍵BRAKE調整鈕
旋轉START調整鈕播放按鍵來調整你想要的啟動
時間，從停止模式到啟動可調整時間範圍為0.2~6
sec。
旋轉BRAKE調整鈕煞車按鍵來調整你想要的煞車
時間，從播放模式到停止可調整時間範圍為0.2~6
sec。
8. 反轉鍵
此反轉鍵可用來反轉圓盤轉動方向。
9. Pitch按鍵
按下+/-10% 鍵可以增加或減少10% pitch，這時按
鍵指示燈會亮起來。
按下+/-20% 鍵可以增加或減少20% pitch，這時按
鍵指示燈會亮起來。
同時按下+/-10% 和+/-20% 鍵可以增加或減少50%
pitch，按鍵指示燈會亮起來。
10. Quartz按鍵
此按鍵用來控制有無pitch變化。當按下Quartz鍵
啟動Quartz功能，圓盤的轉動速度會固定在0%
pitch，這時移動Pitch Slider也不會有變化。當沒啟
動Quartz功能的時候，Pitch Slider則可以用來改變
圓盤的轉速。
11. Pitch Slider
當PITCH顯示燈亮時，移動Pitch Slider可改變轉盤
的轉速。
12. 平衡錘
調整唱針對唱盤準確的下壓力。輕輕的旋轉將平衡
錘栓在唱柄後面。
13. 45 RPM 接合器
當播放7吋唱片時，需在中心軸放置45-rpm接合器
以適合7吋唱片中心的大孔徑。
1. 啟動/停止按鍵
按下啟動/停止鍵來開始或停止圓盤轉動。
2. 頻閃觀測點
在圓盤邊的圓點，當圓盤轉動時圓點會顯示圓盤轉
動的速度，當圓點偏向右表示轉盤速度比顯示的速
度來的慢；偏向左則表示轉速比顯示的來的快；如
果圓點是靜止的代表是正常轉速。
3. 電源開/關
向右轉開啟電源。
向左轉關閉電源。
4. 圓盤轉動速度選擇
按下鍵33選擇轉速33 rpm。
按下鍵45選擇轉速45 rpm 。
同時按下鍵33及45可以選擇78 rpm 要回到33或45轉
速，只需按下所需的轉速鍵即可。
5. 照明燈
將照明燈插入底座，燈就會亮起來。
6. 轉盤扭力調整(JOG ADJUST調整鈕)
旋轉JOG ADJUST調整鈕來調整你想要的轉盤扭
力。
4 5 6 7 8 9
1
1
2
3
11
12
13
10
DJ-5500X(Artwork V4.0)101212 Rev.IM.indd 章節2:7DJ-5500X(Artwork V4.0)101212 Rev.IM.indd 章節2:7 2012/10/12 下午 03:17:492012/10/12 下午 03:17:49

8
中
文
部件名稱與功能
14. Phono輸出
標準輸出(RCA jacks)，可以連接各種DJ混音器的Phono輸入。
15. PHONO/LINE輸出切換開關
依PHONO/LINE輸出切換開關位置的不同, 你可以連接這黑膠唱盤到任ㄧ個有PHONO或LINE輸入的機台。
16. 電源線連接座
用來連接所提供的電源線。
17. 唱柄前座
此唱柄前座用來連接唱針和唱頭。
18. 唱柄前座鎖帽
將唱柄前座嵌入唱柄的前端，然後順時針轉動鎖帽，使其固定。
19. 提供的S型唱柄
20. 唱柄舉臂
用來抬高唱柄使其高於唱片表面。
21. 唱柄的夾鉗及放置區
用來放置唱柄的地方，在搬運過程中需栓上唱柄的夾鉗做為保護。
22. 唱柄控制桿
用來控制唱柄上下舉臂的動作。
23. 防滑控制
提供唱柄向心力來防止唱片轉動時產生離心力而導致向外滑。唱頭製造商
通常會正確規範設定。
18
17
20
21
22
23
19
161514
DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 章節2:8DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 章節2:8 2012/10/3 下午 04:46:592012/10/3 下午 04:46:59

T80T80
9
中
文
操作
參照以下說明對應唱柄前座和唱頭的連接線:
所提供的連接線如下：
White (L+ ) Left channel +
Blue (L - ) Left channel -
Red (R+ ) Right channel +
Green (R- ) Right channel -
1. 將開闢向右轉開啟電源，這時候轉速顯示燈和頻閃觀測燈會亮起來。
2. 插上探照燈照明唱頭
3 . 把想播放的唱片放到唱盤墊上。當播放45rpm唱片時，需先在中心軸放置45-rpm接合器。
4. 再來設定可以符合唱片的轉速(33/45/78)。
5. 接著鬆開唱柄的夾鉗。
6. 把唱柄控制桿切換到up的位置。
7. 然後按下啟動/停止鍵，圓盤就會開始轉動。
8. 這時候將唱柄移到想要播放的唱片曲目上
9. 然後將唱柄控制桿切換到down的位置，唱柄會慢慢降下來。接著唱片就開始播放。
10. 再來按下pitch鍵調整到想要的範圍，有+/-10%或 +/-20% 或+/-50% 三種選擇。
11. 若還有需要微調pitch速度，可以藉由上下移動pitch slider來做改變。播放的時候觀察在圓盤邊的頻閃觀測
點，當圓點偏向右表示轉盤速度比原本的速度來的慢；偏向左則表示轉速比原本的速度來的快；如果圓點是
靜止的代表是正常轉速。
12. 唱片播放過程中，如果要暫停播放，只需舉起唱柄控制桿就可以。
13. 當播放結束的時候，抬高唱柄控制桿並將唱柄移回放置區，確實的栓上唱柄的夾鉗。
14. 然後按下啟動/停止鍵來停止圓盤轉動。
15. 最後左轉電源開關關閉電源。
注意 : 本手冊中的規格及資訊如有變更，恕不另行通知，請上網下載最新版本。
DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 章節2:9DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 章節2:9 2012/10/3 下午 04:47:022012/10/3 下午 04:47:02

10
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use the apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider
than the other. A grounding- type plug has two blades and a third grounding prong. The wide blade or the third prong is
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/ accessories specified by the manufacturer.
12. Use only with a cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lighting storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. When the mains plug or appliance coupler used as the disconnect device, it shall remain readily operable.
16. Please keep the unit in a good ventilation environment.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be
exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or other outlet unless the blades
can be fully inserted to prevent blade exposure.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use to the presence
of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute
a risk of electric shock.
CAUTION : To reduce the risk of electric shock, do not remove any cover. No user-
serviceable parts inside. Refer servicing to qualified service personnel only.
The exclamation point within the equilateral triangle is intended to alert the user to the presence of important
operation and maintenance (servicing) instructions in the literature accompanying this appliance.
WARNING
CAUTION
DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 章節2:10DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 章節2:10 2012/10/3 下午 04:47:032012/10/3 下午 04:47:03

T80T80
11
ENGLISH
17. All warnings on the appliance and in the operating instructions should be adhered to.
18. Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.
19 .Power Sources - This product should be operated only from the type of power source indicated on the rating label. If you are
not sure of the type of power supply to your home, consult your product dealer or local power company. For products
intended to operate from battery power, or other sources, refer the operating instructions.
20. Grounding or Polarization - This product may be equipped with a polarized alternation-current line plug (a plug having one
blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
21. Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items
placed upon or against them, paying particular attention to the cord in correspondence of plugs, convenience receptacles,
and the point where they exit from the appliance.
22. For AC line powered units - Before returning repaired unit to user, use an ohm-meter to measure from both AC plug blades to
all exposed metallic parts. The resistance should be more than 100,000 ohms.
23. Non-use Periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period
of time.
24. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through
openings.
25. Damage Requiring Service - The appliance should be serviced by qualified service personnel when: A. The power-supply cord
or the plug has been damaged; or B. Objects have fallen, or liquid has been spilled into the appliance; or C. The appliance
has been exposed to rain; or D. The appliance does not appear to operate normally or exhibits a marked change in
performance; or E. The appliance has been dropped, or the enclosure damaged.
26. Servicing - The user should not attempt any service to the appliance beyond that that described in the operating instructions.
All other servicing should be referred to qualified service personnel.
27. Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the
product due to lightning and power-line surges.
28. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in
fire, electric shock, or other hazards.
29. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks
to determine that the product is in proper operating condition.
IMPORTANT SAFETY INSTRUCTIONS
DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 章節2:11DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 章節2:11 2012/10/3 下午 04:47:042012/10/3 下午 04:47:04

12
ENGLISH
SPECIFICATIONS &ACCESSORIES SUPPLIED
Turntable section
• 3-speed full manual
• Motor : 16pole, 3phase
• Driving : Direct drive
• Platter : 332mm dia. aluminum diecast
• Speed : 33 1/3 and 45 rpm and 78rpm
• Wow and flutter : Less than 0.1% WRMS (JIS WTD)
with 33 1/3rpm
• S/N Ratio : More than 55dB (DIN-B)
• Pitch controls : +/- 10%,+/- 20%,+/-50%
• Electronic brake
• Starting torque : More than 4.5kgf.cm
• Starting time : 0.2~6 sec.(Adjustable)
• Braking time : 0.2~6 sec.(Adjustable)
• Time for speed change
- Less than 0.2 sec. from 33 1/3 to 45 rpm.
- Less than 0.2 sec. from 45 to 33 1/3 rpm.
- Less than 0.5 sec. from 33 1/3 to 78 rpm.
Tonearm section (Cartridge: AT-3600L)
• Type : S-shaped
• Effective arm length : 230mm
• Tracking error angle : Less than 3 degree
• Anti-skating range : 0~3g
• Applicable cartridge weight : 13 ~18g (Including
Headshell )
•Output : 1.5~3.6mV at 1KHz 5cm/sec (HP-4005)
• Frequency response : 20Hz~20KHz
• Channel separation : More than 15dB
• Channel balance : Within 2.5dB at 1KHz
• Tracking Force adjustment range：3~4g
Audio Section：
•
EQ. RIAA Characteristic 50Hz~20KHz+0.5/-1dB
• Phono Output Level 1.5~3.6mV at 1KHz
5cm/sec (HP-4005)
•Line Output Level 90~216mV at 1KHz
5cm/sec (HP-4005)
•S/N Ratio ≧60dB (1KHz,4mV INPUT)
General Specifications
• Power supply : AC 220V, 50Hz
• Power consumption : 13Watts
• Dimensions : 450 (W) x 353 (D) x 156 (H) mm
• Weight : 12.2 Kg
Accessories supplied
- 1 Counterweight
- 1 Target light
- 1 Headshell
- 1 Platter
- 1 45 rpm adaptor
- 1 Slipmat
- 1 AC cord
- 1 Connecting cable
- 1 Dust Cover
- 1 User Manual
DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 章節2:12DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 章節2:12 2012/10/3 下午 04:47:052012/10/3 下午 04:47:05

T80T80
13
ENGLISH
PART NAME AND FUNCTIONS
1. Start/Stop button
Press this button to start or stop the platter.
2. Strobe dots
The dots around the edge of the platter are used in
conjunction with the light located inside the power.
While the platter is in rotation, the dots help to
indicate the speed of rotation. The speed is lower
than the displayed speed (33,45,78) when the dots
are flowing to the right. It is higher than the displayed
speed (33,45,78) when the dots are flowing to the
left. When the strobe is stopped, the platter is rotating
at the displayed speed.
3. Power ON/OFF
On - Rotate Right. Off - Rotate Left.
4. Platter revolution speeds
33 rpm – Press 33
45 rpm – Press 45
78 rpm – Press 33 and 45 buttons simultaneously.
To return to 33 or 45-rpm play mode, just press the
desired button.
5. Target light
Insert target light to the deck and it will light up.
6. JOG ADJUST
Rotate the knob to adjust the starting torque of the
motor from light to heavy.
7. Start /Brake
Rotate the knob to adjust stop mode enter normal
play (or normal play enter stop mode) at your
desired brake time within 0.2~6 sec.
8. Reverse
This button is used to reverse the direction of the
platter rotation.
9. Pitch buttons
Press the +/-10% button to switch to 10% pitch
and light on.
Press the +/-20% button to switch to 20% pitch
and light on.
Press +/-10% and +/-20% buttons simultaneously
will be lit up and switch to +/-50%.
10. Quartz button
This button is used to turn the pitch function on
and off. When the Quartz function is activated the
platter will hold the RPMs at 0% pitch, regardless of
the Pitch Slider. When the quartz function is inactive
the Pitch Slider may be used to manipulate platter
speed.
11. Pitch slider
Use this to change the speed of the platter when
the PITCH indicator is lit.
12. Counterweight
Adjustment creates the proper downward pressure
of the stylus to the record. Attach now by sliding the
counterweight onto the rear of the tone arm. Twist
it lightly and it will screw onto the rear shaft of the
tone arm.
13. 45 RPM Adapter
For 45 RPM records, place the 45 RPM adapter on
the center spindle before placing the record on the
platter.
4 5 6 7 8 9
1
1
2
3
11
12
13
10
DJ-5500X(Artwork V4.0)101212 Rev.IM.indd 章節2:13DJ-5500X(Artwork V4.0)101212 Rev.IM.indd 章節2:13 2012/10/12 下午 02:52:102012/10/12 下午 02:52:10

14
ENGLISH
PART NAME AND FUNCTIONS
14. Phono output
This is the standard analog output (RCA jacks), which can be connected to phono input on any DJ mixer.
15. Phono/line switch
Depending on the position of the phono/line switch, you can connect the turntable to any phono or line level input.
16. Power cord connector
Used to connect the included power cord.
17. Stylus headshell
The included headshell is used to connect your stylus with the tone arm.
18. Headshell locking nut
Attach headshell by inserting into the front end of the tone arm, then turn
the locking nut clockwise with the head shell firmly held horizontally.
19. S-shaped tonearm
20. Tonearm lift
This elevates the tone arm above the record surface.
21. Tonearm clamp and rest
Use this rest for the tone arm and clamp it in position during transportation.
22. Tonearm lever
Controls the up and down action of the tone arm lift.
23. Anti-Skate control
This applies inward force to the tone arm so it doesn't skip outward across
the record due to the centrifugal force of the record spinning. Cartridge
manufacturers usually specify the proper setting of this.
161514
18
17
20
21
22
23
19
DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 章節2:14DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 章節2:14 2012/10/3 下午 04:47:072012/10/3 下午 04:47:07

T80T80
15
ENGLISH
OPERATING
Connect the connecting wires of the headshell with the connections of the pick-up system and observe the
correspondence with the following wiring instructions:
Attach wires as follows:
White (L+) Left channel +
Blue (L -) Left channel –
Red (R+) Right channel +
Green (R-) Right channel –
1. Turn the power dial to turn on and the speed indicator and the strobe-illuminator will light up.
2. Insert target light for illumination the stylus.
3. Place a record on the turntable mat. When playing a 45rpm record with a large center hole; place the 45-rpm
adapter on the center spindle.
4. Set the rotation speed (33/45/78) to match the record.
5. Release the arm clamp.
6. Set the cueing lever to the up position.
7. Press the Start/Stop button and the turntable platter will start to rotate.
8. Move the tone arm over the desired groove.
9. Set the cueing lever to the down position, the tone arm will descend slowly onto. The record and play begins.
10. Set the desired pitch adjusts range by depressing the buttons until the desired pitch is reached. Options are
+/-10% or +/-20% or +/-50%.
11. Adjust the pitch to a desirable speed. During play, observe the strobe dots. If the strobe dots appear to the
right, the pitch is slower than the rated speed. If they flow to the left, the pitch is faster than the rated speed. If
the strobe dots appear stationary, which means the platter is in normal turntable speed, move the pitch control
slider up or down to adjust the speed.
12. To suspend play, lift tone arm with cueing lever.
13. When play is finished, raise the cueing lever, move the tone arm to the armrest and secure the tone arm with
the arm clamp.
14. Press the Start/Stop button to stop the platter rotating.
15. Turn the power dial to turn off the power.
NOTES : Specifications and improvements in the design of this unit and this manual are subject to change
without any prior written notice.
DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 章節2:15DJ-5500X(Artwork V3.0)100312 Rev.IM.indd 章節2:15 2012/10/3 下午 04:47:092012/10/3 下午 04:47:09

Printed in ChinaVERSION 1.1
DJ-5500X(Artwork V4.0)101212 Rev.IM.indd 章節2:16DJ-5500X(Artwork V4.0)101212 Rev.IM.indd 章節2:16 2012/10/12 下午 02:59:232012/10/12 下午 02:59:23