Vynco VMC51 User manual

PRODUCT INFORMATION
VMC51 COMBINED METER BOARD 51 WAY
SPECIFICATIONS
Rated Operational Voltage 415V AC maximum, 50Hz
Maximum Current 100A
Rated Insulation Voltage 1000V
Short Circuit Withstand 10kA
Degree of Protection IP40 – Indoor use only
Usage Recommended for use with copper conductors only
Number of Ways (Poles) 51 Ways – 3 rows of 17 Ways
Gear Tray Size of Gear Tray: 320mm ×248mm
Maximum Height of Meter: 84mm
Maintenance This product does not require maintenance once installed
DIMENSIONS AND WEIGHT
Height Width Depth Weight
Cover Assembly 800mm 402mm 35mm 4.5kg
Base (cut out size) 754mm 355mm 98mm 5.2kg
INSTALLER NOTES
EARTH AND NEUTRAL BUSBAR LAYOUT
Material Number
of Bars
Double
Screw
Tunnels
Single
Screw
Tunnels
Earth Bar Brass Steel 1 3 40
Neutral Bar Brass Steel 1 4 22
RCD Neutral Bar Brass Steel 8 1 3
1. This product is designed to be installed
inside a wall cavity with a minimum stud
size of 90mm and a minimum plaster board/
wall covering of 10mm.
2. For surface mounting use VMCC surface mount
enclosure in conjunction with this board.
3. The metal wall enclosure must be earthed.
4. Fold out tabs (x6) on the side walls of the
enclosure can be folded out to set the correct
height onto the studs.
5. Door hinge pins are easily removable and
the door can be reversed so that it swings
either left or right.
6. This product is designed to be used with
New Zealand and Australia’s MEN system.
7. Do not install a link between the neutral bars
and earth bar on circuits dedicated to RCDs.
8. Please ensure circuits and protective devices
are adequately identied during installation.
WARRANTY STATEMENT
The VMC51 is guaranteed for a period of one year from the date of
purchase against defects in workmanship and materials.
Defects will be rectied by replacement of the product.
This warranty becomes null and void if, in our opinion, the
product has been misused, incorrectly installed, tampered with, or
subject to power surges.
The warranty does not include any labour or other
associated expenses that may be involved in removal or
installation of the product.
To obtain a replacement under this guarantee, return the goods
(prepaid) to the place of purchase (proof of purchase must be supplied).

PRODUCT INFORMATION
VMC51 COMBINED METER BOARD
Fold out tabs to set height of
enclosure onto studs.
Fitting into wall cavity
Removing door
Rotate top pin 90°. Slide pin down to release door.
There is no need to remove pin
completely.
Lift and remove door.
12 3
INSV0058
VYNCO INDUSTRIES (NZ) LIMITED
CHRISTCHURCH
388 Tuam Street, Phillipstown, Christchurch, 8011
PO Box 9022, Tower Junction, Christchurch 8149
New Zealand
P [phone] F [phone]
E [email protected]
VYNCO.CO.NZ
AUCKLAND
9 Levene Place, Mount Wellington
PO Box 12 249, Penrose, Auckland 1061
New Zealand
P [phone] F [phone]
51 WAY