Wahl KM10 Configuration guide

ANIMAL TOOL CARE
Cleaning your Wahl clippers blades
EVERYDAY CLEANING
Your tools should be cleaned and
sanitized after every client to
prevent the spread of infectious
skins diseases.
Start by brushing off excess hair
on your blades.
Spray your clipper/trimmer blades
with Wahl Clini-Clip, and allow to
sit before wiping off any excess
with a clean towel.
Ensure you also spray your
combs, brushes and attachment
combs with Clini-Clip as well.
Make sure you oil your blades
immediately after using Clini-Clip
with Wahl Blade Oil.

ANIMAL TOOL CARE
Cleaning your Wahl clippers blades
ONCE A MONTH CLEANING
Your Clipper blades should be removed
periodically (at least once a month) to allow
the cut hair to be cleaned out from under the
blades.
First, check to see what type of clipper & blade
you have. It will be either one of the two below:
1. Snap on/off
This will be the case for most of our Animal
Clippers, UNLESS it has a taper lever. If your
clipper does not have a taper lever, simply
snap the blade off and clean any loose hair
that has fallen into the now-open section of
the clipper. Once this is done, simply re-at-
tach your blade!
2. Screws blades
If your clipper does have a taper lever, then
you will be required to screw the blades off
for cleaning. Simply use a screwdriver to
undo the blade screws and then remove the
blades. Remove the sponge and clean it,
plus any hair that is caught in the clipper.
Reverse the process to re-attach the blades.
To see a video on how to align your blades,
click here:
https://au.wahl.com/Home/Education-Servic
es/How-To-Tutorials.aspx
How to clean your snap on/off blade:
https://au.wahl.com/Home/Education-Servic
es/How-To-Tutorials.aspx
How to clean your 5 in 1 Blade:
https://au.wahl.com/Home/Education-Servic
es/How-To-Tutorials.aspx
All Wahl Clippers
are tested before they
leave our factory. Often
testing materials or grinding
compound may be found on the
blades. This is easily cleaned
off using the enclosed blade
cleaning brush.

ANIMAL TOOL CARE
Oiling your Wahl clippers blades
With the blade directed down-
wards, turn the clipper/trimmer
on.
Apply three drops of oil – one on
each side and one in the middle.
With the clipper/trimmer still on,
move the taper lever back and
forth to work oil into blade.
Turn off clipper/trimmer and blot
excess oil with clean towel.
Always use Wahl Clipper Oil on your Wahl tools as it is
specifically designed to extend the life of your blades.
HOW TO OIL YOUR BLADES
How to oil your blade:
https://au.wahl.com/Home/Education-Services/
How-To-Tutorials.aspx