Wahl James Martin ZX888X User manual

1
James Martin Food Processor
Food Processor
ZX888X
Safety rst
The blades of this appliance are extremely sharp, take great care.
Always unplug before adding or removing attachments.
Read all instructions before using for the rst time. 2
Please read all instructions carefully to familiarise yourself with the
Wahl James Martin Food Processor before using.
THIS FOOD PROCESSOR IS INTENDED FOR HOUSEHOLD USE ONLY.
Save these instructions for further reference.
For any further assistance or information call customer services on
T: 01227 740066
or visit
W: www.wahl.co.uk
E: customer[email protected]
INDEX
DESCRIPTION OF PARTS Page 3
IMPORTANT SAFEGUARDS Page 4
BEFORE USE Page 5
OPERATING INSTRUCTIONS Page 5
CLEANING AND MAINTENANCE Page 9
WIRING Page 10
PRODUCT REGISTRATION Page 11
GUARANTEE Page 11

A: Feeder Tube M: Blending Jar
B: Feeding Funnel N: Blade Base
C: Processor Lid O: Chopping Jar
D: Plastic Blade P: Drive shaft
E: Whisk Q: Motor Base
F: Stainless Steel Blade R: Speed Selector
G: Slicing Blade S: Locking Symbols
H: Chipping Blade
I: Shredding Blade
J: Disc Stand
K: Measuring Cup
L: Blender Lid
A
DESCRIPTION OF PARTS
B
G
H
I
J
M
N
L
K
C
O
Q
R
P
D
EF
S
34
IMPORTANT SAFEGUARDS
When using this electrical appliance, especially when children are present, basic safety
precautions should always be observed including the following.
TO REDUCE THE RISK OF FIRE AND INJURY
1. This appliance shall not be used by children. Keep the
appliance and its cord out of reach of children.
2. Appliances can be used by persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the appliance
in a safe way and if they understand the hazards involved.
3. Children shall not play with the appliance.
4. Never touch or allow contact with moving parts while in
motion. Keep hands, hair clothing and other utensils away
from the moving parts during operation to prevent accident,
injury or damage to the appliance.
5. Switch off the appliance and unplug from outlet when not
in use, before putting on or taking off attachments and also
before cleaning the appliance.
6. Never use your appliance without paying attention! Always
unplug the unit when not in use, even for a moment.
7. Do not operate the appliance with a broken cord or plug, or
if the appliance malfunctions, or is dropped or damaged in
anyway.
8. Any servicing or repair must be performed by an authorised
service representative.
9. Do not use outdoors or in damp areas.
10. Do not let the cord hang over the edge of the work surface
or let it touch any hot surfaces.
11. The use of attachments that are not supplied by the
manufacturer may cause re, electric shock or injury and
damage to the appliance.
12. To protect against risk of electrical shock, never immerse
the unit or let it come into contact with water or any other
liquids. Do not use the unit with wet hands. If the appliance
should become wet, damp or fall in water, remove plug

5
from mains socket immediately. Do not put your hands in
the water.
13. Never carry the unit by its power cord.
14. Use this appliance only for its intended purpose.
15. This appliance is intended to be used in household and
similar applications such as:
• Staff kitchen areas in shops, ofces and other working
environments
• Farm houses
• By clients in hotels, motels and other residential type
environments
• Bed and breakfast type environments
WARNING: THE BLADES OF THIS FOOD PROCESSOR ARE EXTREMELY
SHARP! DO NOT TOUCH THE BLADES.
BEFORE USE
IMPORTANT: Do not operate continuously for more then 2 minutes, allow the
machine to cool before re-using.
IMPORTANT: Your appliance is tted with a safety features that will not allow it to
function unless the processor bowl is tted correctly. DO NOT attempt to override this
feature.
Before plugging in make sure that the voltage matches that shown on the rating label.
Before rst use, carefully unpack the food processor and its attachments and remove
any packaging material. Clean all the parts except the motor base following the
cleaning instructions on page 9. Handle the blades with extreme care as they are
sharp.
OPERATING INSTRUCTIONS
USING THE CONTROL SETTINGS
Pulse setting
The pulse setting is for when you want short sharp bursts of power and as soon as you
release the button it will stop. This is ideal if you want to roughly chop or blend some-
thing like tomatoes or peppers and you require control so that you don’t end up with a
pulp or ner mixture than required.
Setting 1 and 2
Settings 1 and 2 will operate continuously until you return the switch to the off
position. Setting 2 being the faster and more powerful setting. When processing some
ingredients you may want to use setting 1 and increase the power to setting 2 as and
when required to give a boost to the process.
6
WARNING: ALWAYS ENSURE THE POWER CORD IS UNPLUGGED FROM
THE POWER OUTLET AND THE SPEED SELECTOR IS IN THE “0” OFF
POSITION BEFORE ADDING OR REMOVING ANY OF THE ATTACHMENTS.
The food processor can be used for performing different tasks using the various
accessories.
BLENDING
1. Place the blending jar on the Motor Base, lining up the arrow
on the jar with the unlock symbol and turn clockwise until the
blending jar locks into place. If the blending jar is not correctly
positioned, the blender will not work. See Page 3 S
2. Peel or core the fruit or vegetables and cut it into small dices,
put the food into the jar. Add enough liquid to facilitate the
smooth running of the appliance. The amount of mixture
should not exceed the max level as indicated on the blending
jar.
NOTE: never use boiling liquids or run the appliance empty.
And the blending jar can not be used for blending meat.
3. Place the lid securely onto the jar.
4. You may add ingredients into the jar through the centre opening of
the lid during operation, then replace Measuring Cup if necessary.
Let the tabs of Measuring Cup align with the grooves of the lid, push
down and turn clockwise by 90° to lock it in place, when disassem-
bling, turn the measuring cup anti-clockwise to unlock it.
5. Connect the plug to wall outlet and set Speed Selector to your de-
sired speed. There are four setting: P, 0, 1, 2. The 1 setting is the low
speed, the 2 setting is the high speed. Turn the selector to P position
and hold it to pulse actuate motor for delicate chopping. Release it to
return the 0 position. The Pulse mode allows you to create a burst of
power for quick, efcient blending.
NOTE: The total operating time should not more than 3 minutes.
6. Turn the Speed Selector to 0 Position once the mixture has been
blended to your desired consistency.
7. Remove the blending jar from the Motor Base (turning the jar anti-
clockwise), carefully take off the lid, then pour and serve.
WARNING: THE BLADE BASE CAN BE DISASSEMBLED FOR CLEANING,
THE BLADES ARE EXTREMELY SHARP. HANDLE WITH CARE. SEE CLEANING
SECTION ON PAGE 9

7
CHOPPING
1. Firstly place the drive shaft into the motor base, make sure it is
in position.
2. Place the chopping jar on the Motor Base, lining up the arrow
on the chopping jar with the unlock symbol and turn clockwise
until the chopping jar locks into position. Make sure it is
assembled correctly, otherwise the appliance will not operate.
See Page 3 S
3. Insert the Stainless steel blade onto the drive shaft in the
chopping jar securely. Make sure it is locked into position.
4. Place the prepared food into the jar. The food must be cut into
small pieces. During chopping, you can add food through the
feeding funnel with the pusher, never use food or ngers to
push the food into the feeding funnel.
5. Place the lid onto the jar and turn it clockwise until the tab of
the lid locks securely into the jar handle. Make sure it is locked
into position correctly, otherwise the appliance will not operate.
6. Connect the appliance to power supply and set Speed Selector to
your desired speed.
7. There are four setting: P, 0, 1, 2. The 1 setting is the low speed,
the 2 setting is the high speed. Turn the selector to P position
and hold it to pulse actuate motor for delicate chopping. Release
it to return the 0 position. The Pulse mode allows you to create
a burst of power for quick, efcient blending. You can chop up to
400g of following foodstuff. Hard substance: cheese, dried fruits,
and certain vegetables (carrots, celery), Soft substance: certain
vegetables (onions, spinach) Raw and cooked meat (boned and
sliced).
8. Turn the Speed Selector to “0” position and unplug the appliance
after chopping. Open the top lid and hold the blade by its hub and
remove. Unlock the chopping jar by turning it in anti-clockwise
away from motor base, and lift it off. Empty the processed food.
WARNING: THE BLADE BASE CAN BE DISASSEMBLED FOR
CLEANING, THE BLADES ARE EXTREMELY SHARP. HANDLE
WITH CARE
KNEADING/MIXING
1. Firstly place the drive shaft into the motor base, make sure it is in position.
2. Place the chopping jar on the Motor Base from the unlock position and turn
clockwise until the chopping jar locks into position. Make sure it is assembled
correctly, otherwise the appliance will not operate.
3. Insert the plastic blade onto the drive shaft in the jar securely.
4. Place ingredients into the jar.
5. Place the lid onto the chopping jar and turn it clockwise until the tab of the lid clicks
into slot in the jar handle. Make sure it is locked into position correctly, otherwise
the appliance will not operate.
6. Insert the food pusher into the feeding funnel.
8
7. Connect the appliance to the power supply.
8. You can add ingredients through the feeding funnel while the appliance is running.
NOTE: the food pusher also can be used as measuring cup for measuring oil or water.
9. During kneading/mixing, to avoid vibration, hold the lid with one hand, and with the
other hand hold the handle.
10. Stop the process by turning the speed selector to “0” position as soon as the
pastry starts to form a ball.
11. Unplug the appliance and remove the blade before removing the
dough.
BEATING AND WHISKING
1. Firstly place the drive shaft onto the motor base, make sure it is in
position.
2. Place the chopping jar onto the Motor Base from the unlock
position and turn clockwise until the chopping jar locks into position.
Make sure it is assembled correctly, otherwise the appliance will
not operate. See Page 3 S
3. Insert the whisk onto the drive shaft securely.
4. Place the ingredients into the bowl. You can use it to prepare
mayonnaise, sauces, egg whites, meringues (up to 10 egg whites),
and whip cream.
5. Place the lid onto the chopping jar and turn it clockwise until the tab
of the lid clicks into slot in the jar handle. Make sure it is locked into
position correctly, otherwise the appliance will not operate.
6. Set the speed selector to the high speed.
NOTE: Never use this whisk to knead dough or mix cake mixtures.
7. Do not run the appliance for more than 2 minutes per time.
SLICING AND SHREDDING
1. Firstly place the drive shaft onto the motor base, make sure it is in position.
2. Place the chopping jar on the Motor Base from the unlock position and turn
clockwise until the chopping jar locks into position. Make sure it is assembled
correctly, otherwise the appliance will not operate.
3. Fit the shredding blade or slicing blade or chipping blade into the disk stand, place
them in the bowl. For assembling, rstly place the side of the blade with the long
tab into place, then push in the other side. For disassembling push out the side
with the short tab.
4. Place the lid onto the chopping jar and turn it clockwise until the tab of the lid clicks
into slot in the jar handle. Make sure it is locked into position correctly, otherwise
the appliance will not operate.
5. Turn the speed selector to 1 or 2 setting to start.
Note: the shredding/slicing/chipping disks can slice thickly-potatoes, onions,
thinly-cucumbers, boot root, apples, and carrots.
6. Use the food pusher to feed food into the feeding funnel. The food shall be cut into
proper size to suitable for the feeding funnel. You can slice/grate up to 1000g of
food.

9
7. Minimum 2 minutes rest period must be maintained after one operation cycle. At
least 30 minutes rest period must be maintained to let the appliance cool down
after three operation cycles.
8. Turn the speed selector to “0”position and unplug the unit after processing.
Remove the blade assembly. Unlock jar by turning it in anti-clockwise away from
its base, and lift it off. Empty the processed food.
WARNING: THE BLADE BASE CAN BE DISASSEMBLED FOR CLEANING, THE
BLADES ARE EXTREMELY SHARP. HANDLE WITH CARE
CLEANING AND MAINTENANCE
NOTE: Always clean removable parts immediately after use.
WARNING: BE CAREFUL WHEN CLEANING THE PARTS. AVOID TOUCHING THE
BLADES AS THESE ARE EXTREMELY SHARP.
NEVER IMMERSE THE MAIN HOUSING IN WATER OR ANY OTHER LIQUID
1. Always unplug the appliance before cleaning.
2. Disassemble all removable parts before cleaning.
3. Clean the main housing with a clean damp cloth and dry thoroughly.
Ensure that the interlock areas are free from food particles.
4. Clean all removable parts in a dishwasher or in warm soapy water using a mild
detergent.
TIP: For a quick wash up between processing or blending. Pour a little warm water into
the chopping jar or blender jar and operate for a few seconds. Pour out the water and
rinse if necessary.
WARNING: NEVER IMMERSE THE MOTOR BASE IN WATER OR ANY OTHER
LIQUID.
WARNING: THE BLADE BASE CAN BE DISASSEMBLED FOR CLEANING, THE
BLADES ARE EXTREMELY SHARP. HANDLE WITH CARE
IMPORTANT: Dry thoroughly. Ensure the interlock area is free of food particles.
NOTE: Some food may discolour the disk stand. This is normal and will not harm
the plastic or effect the avour of food. Rub with cloth dipped with vegetable oil to
remove discolouration.
10
WASTE ELECTRICAL & ELECTRONIC EQUIPMENT DIRECTIVE 2002/96/EC
(WEEE)
At the end of this products life it should not be disposed of with general
household waste.
Care should be taken to dispose of in a suitable manner in accordance with
your Local Authority regulation.
WIRING
WARNING: If the supply cord is damaged it must be replaced by the
manufacturers service agent or a similarly qualied person in order to avoid a hazard.
The wires in the mains lead of this Food Processor are coloured in accordance to the
following code:
Blue Neutral (N) Brown live (L)
This appliance is tted with a 3 pin plug which has a 5amp fuse tted.
If the plug supplied is not suitable for your socket or becomes damaged, it should be
cut off and disposed of, and a suitable plug tted as detailed below.
As the colours of the wires in the mains lead of this Food Processor may not
correspond with the colour markings identifying the terminals in your plug, proceed as
follows.
The wire, which is coloured BLUE, must be connected to the terminal in the plug which
is marked with the letter ‘N’ or coloured BLACK or BLUE.
The wire, which is coloured BROWN, must be connected to the terminal in the plug
which is marked with the letter ‘L’ or coloured RED or BROWN.
DO NOT connect either wire to the terminal in the plug which is marked with the letter
‘E’ or has the Earth symbol, or coloured GREEN or GREEN/YELLOW.

11
PRODUCT REGISTRATION
Wahl are constantly developing and launching new products in the UK. We would like
to understand your product needs and expectations and we value any comments you
may have. As part of Wahl Customer Care, we are offering you the chance to be kept
up to date with the latest product launches, innovations and special offers.
Please take a minute to register your product online at www.wahl.co.uk.
GUARANTEE
This product is guaranteed against defects in material and workmanship for a period of
2 years from the date of original purchase or receipt as a gift.
Should this product become defective during the guarantee period, return it to the store
of purchase together with your proof of purchase for repair or replacement
Alternatively within the guarantee period you can return the product to Wahl (UK) Ltd
who will repair any such defect or elect to replace the product or any part of it, without
charge, provided that there is proof of purchase. Should a replacement be offered this
will not extend the original guarantee period.
The guarantee becomes invalid in the case of misuse, alteration or repair by
unauthorised persons.
This product is designed for domestic use only and use within a professional
environment will invalidate the guarantee.
This guarantee in no way affects your rights under statutory law in the United Kingdom.
Wahl (UK) Ltd
Herne Bay Trade Park
Herne Bay
Kent
CT6 8JZ
www.wahl.co.uk
Customer Service T: 01227 740066
Form No. ZB529
Rev3 03-18