Wali 1343LKS User manual

INSTALLATION MANUAL
[email protected]
1343LKS

2

Supplied Parts List
3
Arm
A(x1)
VESA Plate
B(x1)
Decor Cover
C(x2)
Adapter
E(x2)
Bolt
F(x8)
Nut
G(x8)
Bubble Level
H(x1)
Allen Key
I(x1)
M4x14 Bolt
M-A(x4)
M5x14 Bolt
M-B(x4)
M6x14 Bolt
M-C(x4)
M8x20 Bolt
M-D(x4)
Adapter
D(x2)
D5 Washer
M-E(x4)
D8 Washer
M-F(x4)
Spacer
M-G(x8)
Bolt
W-A(x2)
Concrete Anchor
W-B(x2)

4
Step 1
Step 2
Twist the knob as the image shown to release the knob and washer.
Option A
Wood Stud
If installing this product on wood stud, mark the position with Bubble Level H& pencil on the wall. Drill
3/16"(4.5mm) diameter x 2.2"(55mm) length holes at the marked position, attach the mount to wood stud and
tighten using Bolt W-A with screwdriver. Fix Décor Cover Conto the front of mount part.
(Screwdriver not included)
A
C
W-A
H

5
Step 2
Step 3
W-A
B
H
C
Twist the knob on the VESA Plate Bto open the arm and ensure the arm is vertical.
Option B Concrete Wall
If installing this product on concrete wall, mark the position with Bubble Level H& pencil on the concrete wall. Drill
3/8"(10mm) diameter x 2.4"(60mm) length holes at the marked position, attach the mount to concrete wall and
tighten using Bolt W-A & Concrete Anchor W-B with screwdriver.Fix Décor Cover Conto the front of mount part.
(Screwdriver not included)
W-B
60

6
Step 4
Step 4.3a
Select M4x14 Bolt M-A or M5x14 Bolt M-B according to your TV/Monitor specification, connect VESA
Plate Btogether with D5 Washer M-E into the mounting holes on the back of TV/Monitor, tighten with
screwdriver.(Screwdriver not included)
Step 4.1
Select TV Screws
Step 4.2
Select Spacers ( if needed )
B
E
Hand thread screws
into the threaded
inserts on the back of
your TV to determine
which screw diameter
(M4,M5,M6 or M8) to
use.
M4 M5 M6 M8
M-E
M-A
M-B
Only one screw size fits your TV

7
Step 4
Step 4.3b
Step 4.3c
F
D
E
G
Select M4x14 Bolt M-A or M5x14 Bolt M-B according to your TV/Monitor specification, connect VESA
Plate Btogether with D5 Washer M-E and Spacer M-G into the mounting holes on the back of
TV/Monitor, tighten with screwdriver.(Screwdriver not included)
Select the VESA size according to TV/Monitors specification as shown in image, connect the
Adapter D& Adapter Eto VESA Plate Busing Bolt F,Nut Gto tighten with wrench and screwdriver.
(Wrench and Screwdriver not included)
BM-E
M-G
M-A
M-B

8
Step 4
Step 4.3c
Three options are available for multiple TV/Monitor specifications.
1) Connect M4x14 Bolt M-A or M5x14 Bolt M-B together with D5 Washer M-E ,Spacer M-G and tighten with screwdriver;
2) Connect M6x14 Bolt M-C together with D8 Washer M-F ,Spacer M-G and tighten with screwdriver;
3) Connect M8x20 Bolt M-D together with D8 Washer M-F , 2 pcs Spacer M-G and tighten with screwdriver;
(Screwdriver not included)
Step 5
Twist the knobs to adjust the arm to be away from wall as image shown.
M-A
M-B
M-E
M-F
M-F
M-D
M-C
M-G
M-G
M-G

9
Step 6
Place the assembled TV/Monitors onto the Arm A, twist the knob as shown in image (#1) to tighten
the VESA Plate B. Twist the bottom knob as shown in image (#2) to tighten the whole arm.
B
A

10
Step 7
To ensure the integral stability of the mount, fully tighten knobs using Allen Key Ieach time after adjusting preferred
angle and extension. (Do NOT tighten knobs only by hand alone). Guide the cable through the clip holder on the arm
as shown in image (#2).
I

11
Angle Adjustments.
Step 8

1-844-SATTLER (18447288537) [email protected]
If you have any questions,please contact us.
We support the technology that brings your home to life.
We offer high quality products, professional customer service,
and extensive technical support.