Wali GSMP002 User manual

INSTALLATION MANUAL
[email protected]
75x75/100x100 32"
MAX
(2~9kg)x2
(4.4~19.8Ibs)x2
RATED
GSMP002
GSMP002W
Dual Monitor Desk Mount

2

Supplied Parts List
3
Arm
A (x1)
VESA Plate
B (x2)
Metal Pad
G (x1)
Nut
H (x1)
C-Clamp Brace
C (x1)
C-Clamp
D (x1)
Bolt
I (x1)
Allen Key 4mm
K (x1)
Support Plate
J (x1)
Allen Key 5mm
L (x1)
M4x12 Bolt
M-A (x8)
M5x12 Bolt
M-B (x8)
M6x10 Bolt
E (x2)
M6x12 Bolt
F (x3)
D5 Washer
M-C (x8)

4
Step 1
Step 2
Option A
Clamp Installation
1. Connect Arm Aand C-Clamp Brace Cfromthe bottomusing M6x12 Bolt Fand tighten with Allen Key 4mm K.
C
K
A
F

5
2"-3.3"
or
D
D
KK
E
C
C
E
2. Select the preferred height firstly and connect C-Clamp Dto C-Clamp Brace Cusing M6x10 Bolt Eand tighten with
Allen Key 4mm K.
3.Tighten the C-Clamp
D to the desktop using the plastic knob.
0.4"-2.2"
D

6
IK
F
G
1. Attach Metal Pad G& Bolt Ito the bottom of Arm Ausing M6x12 Bolt F, tighten up with Allen Key 4mm K.
Option B
Grommet Base Installation
If the existing grommet hole comes with a plastic protector, remove it to ensure a flat surface before installing the desk
mount. Insert the assembled Bolt I through the desk hole, guide the Support PlateJand Nut Hthrough the Bolt I,
rotate the Nut Hto fasten for stability.
2a Existing Grommet Hole Installation
J
H
0.4”-3.3”
I

ø 10mm
(ø ")3/8
7
Step 3.1
Select TV Screws
Step 2.2
Step 3
Markthe position of the hole on your mounting surface. Drill a 3/8"(10mm) diameter hole at the marked position through the
mounting surface. Insert the assembled Bolt Ithrough the desk hole, guide the Support PlateJand Nut Hthrough the Bolt I,
rotate the Nut Hto fasten for stability.
2b Self-drilled Grommet Hole Installation
I
J
H
0.4”-3.3”

8
Step 3.3
M-C
M-C
M-A
M-B
L
Attach the VESA Plate to your TV/Monitor, and thread M4x12 Bolt M-A or M5x12 Bolt M-B into the mounting holes
with D5 Washer M-C , tighten with Allen Key 5mm L.
Step 3.2
Detach the Top Screw by threading it counter clockwise.

9
Step 4
A
Put the assembled TV/Monitor onto the Arm Aand ensure the stability, tighten the VESA plate using Top Screw.
Step 5
Press the Arm Aon horizontal level as image shown, adjust gas spring tension to your personal preference using Allen
Key 5mm L, adjust the tilt tension using Allen Key 5mm L.
A
L
L
For Heavier Monitors
For Lighter Monitors

10
Step 6
Screw out the bolts and take off the cable cases.
Guide the cables through and put the cable cases back.
Step 7

11
Step 8
Manually swivel, tilt , and rotate the monitor for the best viewing angle.
180°
125°
90°
180°
+75°
- 45°

1-844-SATTLER (18447288537) [email protected]
If you have any questions,please contact us.
We support the technology that brings your home to life.
We offer high quality products, professional customer service,
and extensive technical support.
www.walielectric.com