Wali GSDM002 User manual

INSTALLATION MANUAL
[email protected]
75x75/100x100 32"
MAX 1 8kg
(2.2~17. 6lbs )
R AT E D
~
GSDM002
GSDM002W
Dual Monitor Desk Mount

2

Supplied Parts List
3
Arm
A(x2)
Pole
E(x1)
VESA Plate
D(x2)
C-Clamp
B(x1)
Décor Cover
C(x1)
Pole Screw
H(x3)
Top Screw
G(x2)
Tool Holder
F(x1)
Allen Key 3mm
L(x1)
Bottom Grommet Plate
I(x1)
Top Grommet Plate
K(1)
Décor Cover
J(x1)
Allen Key 6mm
M(x1)
X 2
M4x12 Bolt
M-A(x4)
M4x16 Bolt
M-B(x4)
M5x12 Bolt
M-C(x4)
M5x16 Bolt
M-D(x4)
D5 Washer
M-E(x4)
Spacer
M-F(x4)

4
Step 1
Step 2
1. Loosen the screws using Allen Key 6mm Mto adjust the preferred height range option and tighten the screws back.
2. Fix the Décor Cover Conto C-Clamp B.
C-clamp: Up to 3.1”
Grommet: Up to 1.6”
Option A Clamp Installation
or
1.4"-3.1"
0.4"-1.8"
B
B
C
M

5
Step 2
Option A
Clamp Installation
Option B
Grommet Base Installation
E
M
B
3. Place the Pole Eonto the top of C-Clamp B,connect Pole Eand C-Clamp Bfrom the bottom using
Pole Screw Hand tighten with Allen Key 3mm L.
H
L
B
Hand knob
1. Loosen the screws on C-Clamp Busing Allen Key 6mm Mfirstly, then loosen the screw to release the
hand knob using Screwdriver as shown in second image. (Screwdriver needed but not included)

6
Step 2
Option B
Grommet Base Installation
2. Guide Décor Cover J through Pole E, place the Pole Eonto Top Grommet Plate Kand connect them from the
bottom using Pole Screw Hand tighten with Allen Key 3mm L.
I
3a Existing Grommet Hole Installation
Max 1.6”
L
K
H
J
E
E
Hand knob
If the existing grommet hole comes with a plastic protector, remove it to ensure a flat surface before installing the desk
mount. Place the assembled Pole onto the desk hole, guide the Bottom Grommet Plate I
through the hand knob.
Rotate the knob clockwise to fasten for stability.
I

7
Step 2
Step 3
A
A
F
E
M
Option B
Grommet Base Installation
3b Self-drilled Grommet Hole Installation
ø 10mm
(ø ")3/8
Put the Tool Holder Fand Arm Athrough the Pole E, adjust the preferred height and tighten using Allen Key 6mm M.
I
Max 1.6”
Hand knob
E
Grommet Base Installation
Grommet Base InstallationGrommet Base Installation
Mark the position of the hole on your mounting surface. Drill a 3/8"(10mm) diameter hole at the marked position
through the mounting surface. Place the assembled Pole onto the desk hole, guide the Bottom Grommet Plate I
through the hand knob. Rotate the knob clockwise to fasten for stability.
I

and Spacertogether with D5 Washer
Select M4x16 Bolt or M5x16 Bolt
according to your TV/Monitor,connect VESA Plate
according to your TV/Monitor,connect VESA Plate
together with D5 Washer
or M5x12 BoltSelect M4x12 Bolt
Grommet Base Installation
Grommet Base Installation
Grommet Base Installation
8
Step 4
Step 4.3a Step 4.3b
M-A M-C
D
M-E into the mounting
holes on the back of TV/Monitor, tighten with
screwdriver.(Screwdriver needed but not included)
M-B M-D
D
M-E M-F
into
the mounting holes on the back of TV/Monitor,
tighten with screwdriver.(Screwdriver needed but not
included)
Step 4.1
Select TV Screws
Step 4.2
Select Spacers ( if needed )
D
M-E
M-E
M-C
M-A
Hand thread screws
into the threaded
inserts on the back of
your TV to determine
which screw diameter
(M4 or M5) to use.
M4 M5
M-E
M-F
M-B
M-D
D

Put the assembled TV/Monitor onto the Arm A and ensure the stability, tighten the VESA plate using Top Screw G .
9
Step 5
Step 6
A G
Pull the bottom cable slot cover to the VESA direction to detach it off the arm.
A
G

Guide the cable through the cable slot and slide the cover back to arm.
Press the Arm A on horizontal level as image shown, adjust gas spring tension to your personal preference using
Allen Key 6mm M , adjust the tilt tension using Allen Key 6mm A .
Step 8
10
Step 7
A
MM
For Heavier Monitors
For Lighter Monitors
M
A
M

11
Step 9
Manually swivel,tilt or rotate the angle for the best operating environment.

1-844-SATTLER (18447288537) [email protected]
If you have any questions,please contact us.
We support the technology that brings your home to life.
We offer high quality products, professional customer service,
and extensive technical support.