5
ø 10mm
(ø ")3/8
Step 2.1
Select TV Screws
Step 2.2
Step 2.3
Step 2
0.4”-3.3”
0.4”-3.3”
G
H
I
If the existing grommet hole comes with a plastic protector,
remove it to ensure a flat surface before installing the desk
mount. Insert the assembled Bolt H through the desk hole,
guide the Support Plate Iand Nut Gthrough the Bolt H,
rotate the Nut Gto fasten for stability.
2a Existing Grommet Hole Installation
Markthe position of the hole on your mounting surface. Drill
a 3/8"(10mm) diameter hole at the marked position through
the mounting surface. Insert the assembled Bolt Hthrough
the desk hole, guide the Support Plate Iand Nut G
through the Bolt H, rotate the Nut Gto fasten for stability.
2b Self-drilled Grommet Hole Installation
G
H
I
Manually thread screws
into the mounting holes
on the backof your TVto
determine what size of
screwswill fit. (M4/M5)
M-C M-C
M-A M-B
K
Attach the VESA Plate to your TV/Monitor, and thread M4x12 Bolt M-A or M5x12 Bolt M-B into the mounting holes
with D5 Washer M-C , tighten with Allen Key 5mm K.
Detach the VESA Plate by threading the Top Screw counter clockwise.
