Wali TVDVD-04 User manual

TVDVD-04

(2)TV Plate-a2(1)Swivel Headstock-a1 (2)Monitor Bracket-b
(1)Support Column-d1 (1)Support Column-d2 (1)Headstock
Connector-d3
(2) Wrench-d4
(4)M4x12 Bolt-l (4)M4x30 Bolt-m
(8)M6x6 Bolt-j
(4)M6x20 Bolt-n (4)M6x35 Bolt-o (4)M8x20 Bolt-p
(4)M4 Spacer-v
(8)M6/M8 -wSpacer
(4)M8 Washer-u
(8)M6x10 Bolt-g
(3)M8x22 Bolt-i
(1)Plastic Socket-e
(1)Metal Pad-f
(2)Allen Key-x
(4)Rubber Foot-k
(8)M6 Washer-h
(1)Anti-tip Cable
Kit-y (2)Buckle-z
(4)M8x35 Bolt-q (8)M6 Washer-t(4)M4 Washer-s
(4)M8x50 Bolt-r
(1)Tempered Glass-c
2
Supplied Parts List
(3)Nylon cable tie-z1

3
c
k
Connecting the Support Column to Tempered Glass
Assembling support column
Step 2
Step 1
Four holes toward back side
d1
f
e
i
x
d2
g
x
1.1. Tear off the protect paper from the four piece of
Rubber Foot-k, and then attach them to each corner of
the Tempered Glass-c.
1.2. Bolt Support Column-d1 through the tempered glass
using provide parts (e,f,i) accessories, tighten them up with
Allen Key-x.
x
d3
d1
g
d2
2.1. Insert Support Column-d2 into Support Column-d1 and
select the suitable position hole you want by up and down
adjusting, bolt Support Column-d1 and Support Column-d2 with
M6x10 Bolt-gfrom the back side to tighten them up by using
Allen Key-x.
2.2. Place Headstock Connector-d3 to the front top of
Support Column-d2, bolt them up using M6x10 Bolt-gand
M6 Washer-ttighten them up using Allen Key-x.
t

Connecting the TV Plate to Support Column
±30°
s,t,u
l to r
v,w
b
4
Mounting the Monitor Brackets t
You can choose 3 different
heights when installation
o a TV
Step 4
Step 3
-90MM
±0MM
+90MM
3.1. Unscrew the center screw on Swivel Headstock-a1,
then place the Swivel Headstock-a1 onto the Headstock
Connector-d3 and adjust the holes to precisely match up,
insert the center screw back and tighten it up by using
Allen Key-xand Wrench-d4.
x
a1
d4
a2
x
d3
jh
3.2. Attach TV Plate-a2 to the Swivel Headstock-a1 and adjust the
holes to precisely match up, then use M6x6 Bolt-j and
M6 Washer-hto bolt them up with Allen Key-x.
Review your TV mounting holes diameter size and select the suitable bolt from the provided Bolts(lto r) bolt. For example, if
you select the M8x50 Bolt-r , just attach Monitor Bracket-bto the TV mounting holes and adjust the holes to precisely match up
, then use M8x50 Bolt-r ,M8 Washer-u,M6/M8 Spacer-w(if necessary) to bolt up with a screwdriver.This brackets allows
different heights according to your viewing and setup preference.
a1

5
Attaching TV To TV Plate
Step 5
Attaching th e Anti-tip Cable to the TV
Step 6
Insert buckle into hook
Z
Unscrew the nuts with wrench,adjust
the tilt angle up and down.
a2
1. Select your preferred viewing height and carefully hold
the TV assembled with Monitor Bracket-bonto the
assembled TV Plate-a2 , insert the Buckle-zto the
beneath hook between TV Plate-a2 and
Monitor Bracket-bto tighten up.
2. Swivel Headstock-a1 set up with tilt +15/-3 degree, use
Wrench-d4 to loose/tight the beneath screw to set your
preferred angle.
wall
Keep your child safe,solid steel anti-tip cables prevent huge unsecured TV or big cabinet from tipping over injuring kids.
Recommended to be mounted to Wood studs, concrete or Brick walls. Heavy duty ensuring safety, wear-resistance and
durability. Please get back to Step 4 and place the 2 holes of the Anti-tip Cable Kit-ybetween the top Monitor Bracket-band
metal bolt washer before you tighten them up to TV mounting holes.
s,t,u
l to r
y
b
ba1

6
Mount the other end single hole to your wall using Anti-tip Cable Kit-y drill suitable hole size according to your wall material .
45mm
3.8m m
Wood Stud Wall
50mm
8mm
Concrete & Brick Wall
wall
Tie up the Nylon Cable Tie-z1 to Support Column-d1 for cable management.
z1
d1