Wali SBR201 User manual

m
n
c
CD
H
Gh
For key slot holes
For M6 threaded holes
Hand thread bolts into the mounting holes on the back of your Soundbar to determine what size of bolts will fit.
AGB
CL
M
H
M6x16 M8x20
Hand thread bolts into the
mounting holes on the back
of your TV to determine
what size of bolts will fit.
Select M6x16 Bolt C or M8x20 Bolt D according to your TV, connect
Bracket together with D8x16 Washer H into the mounting holes on the
back of the TV, tighten with a screwdriver. (Screwdriver not included)
Select the correct TV mounting bolts
According to the distances of the TV & Soundbar mounting holes, select the appropriate mounting positions on the Bracket. Rotate or turn over the Bracket for the best mounting solutions.
CD
H
SBR201
WARNING
！！USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIP OVER.
SMALL PARTS- NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect
assembly or inappropriate use.
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
Universal Soundbar Mount
M6X30 Bolt
E (x4)
M8x20 Bolt
D (x2)
M5x16 Bolt
B (x2)
M6x16 Bolt
C (x4)
M4x16 Bolt
A (x2)
Bracket
(x1)
D5x12 Washer
G (x2)
M6x12 Flat-side Screw
L (x2)
M6 Nut
M (x2)
D8x16 Washer
H (x4)
spacer
I(x4)
spacer
J (x4)
spacer
K (x2)
M8x30 Bolt
F (x4)
Install With TV/Monitor
1
2 3
INSTALLATION MANUAL 1-844-SATTLER (18447288537)
[email protected]
www.walielectric.com
(15kg/33lbs)
RATED
TIPOVER WARNING
● NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.
● USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL.
Supplied Parts List
Select the correct Soundbar mounting bolts
For M4 or M5 threaded holes

h b
e
Assemble Soundbar with the Bracket and VESA brackets from your TV mount to TV. According to the distances of the TV & Soundbar mounting holes, select the appropriate mounting positions on the Bracket. Rotate or turn over the Bracket for the best mounting solutions. The Bracket should be mounted
between the TV and the VESA brackets. (VESA bracket not included)
Select the correct TV mounting bolts
2a. Select M6x16 Bolt C or M8x20 Bolt D according to your TV, connect Bracket together with D8x16 Washer H , VESA Brackets and
Spacer K into the mounting holes on the back of the TV, tighten with a screwdriver. (Screwdriver & VESA bracket not included)
2b. Select M6x30 Bolt or M8x30 Bolt F and spacers I or J according to your TV, connect Bracket together with D8x16 Washer H , VESA Brackets
and Spacer K into the mounting holes on the back of the TV, tighten with a screwdriver. (Screwdriver & VESA bracket not included)
ji
Select the correct Soundbar mounting bolts
Hand thread bolts into the mounting holes on the back of your Soundbar to determine what size of bolts will fit.
For M4 or M5 threaded holes For M6 threaded holes For key slot holes
h
n
D
n
C
D
C
D
n
C
n
H
A G GB
ML
HC
n
H
H
n
K
K
n
H
n
H
H
E
E
F
F
EF
IJ
IJ
IJ
K
K
M6x16 M8x20
M6x30 M8x30
Hand thread bolts into the
mounting holes on the back
of your TV to determine
what size of bolts will fit.
Hand thread bolts into the
mounting holes on the back
of your TV to determine
what size of bolts will fit.
2
1
3
Install With TV Mount