Wali TVDVD-01 User manual

(1)TV Plate-a (2)Monitor Bracket-b (1)Support Column-d
(4)M4x12 Bolt-l
(4)M4x30 Bolt-m (4)M6x20 Bolt-n (4)M6x35 Bolt-o (4)M8x20 Bolt-p
(4)M4 Spacer-v (8)M6/M8 Spacer-w(4)M8 Washer-u
(4)M6x10 Bolt-g
(3)M8x22 Bolt-i
(1)Plastic Socket-e (1)Metal Pad-f
(1)Allen Key-x
(2)Wire Clip-j (4)Rubber Foot-k
(4)Metal Washer-h
(1)Secuity Wire Kit-y
(4)M8x35 Bolt-q (4)M6 Washer-t(4)M4 Washer-s
(4)M8x50 Bolt-r
(1)Tempered Glass-c
2
S u p p l i e d P a r t s L i s t

3
c
kd
e
i
f
x
1.1
1.2
2.1
2.2
Height
Adjustable
*TV Plate(a) can be installed on wall optionally,
wall mounting hardware have not included.
Connecting the Support Column to Tempered Glass
S t e p 1
Connecting the TV Plate to Support Column
S t e p 2
a*
x
gh
j

s,t,u
l t o r
v,w
b
4
Attaching TV To TV Plate and Managing the Wires
S t e p 4
Mounting the Monitor Brackets to a TV
S t e p 3
First of all, Once you have determined the correct diameter,
please see the diagram as below. You will thread the Bolt into the TV using the correct Washer(s,t,u), and using the
spacer(v,w) if necessary. Please make sure the Monitor Brackets are vertically centered and level with each other.
make sure the diameter of the Bolt( l to r ) your TV requires.
4.1
4.2
4.4
Saf et y
Bo lt
4.3

5
Attaching the Security Steel Wire to the TV
S t e p 5
If your TV is located nearby the wall as the Diagram 5a, then a steel wire can be attached for added security. Attaching the
two ends of steel wire to the top two holes on the back of TV, shown in Diagram 5b.
Attaching the another end of steel wire to the wall according to your wall type, shown in Diagram 5c, 5d and 5e.
50mm
8mm
45m m
3.8m m
Wood Stud Wall
Concrete & Brick Wall
Diagram 5a Diagram 5b
Diagram 5e
Wall
Diagram 5c
Diagram 5d