Walker Edison AF4DRISA User manual

P.1
Please visit our websitefor the most current instructions, assemblytips, report damage,
or request parts. www.walkeredison.com
Revised 29/10/2020(C)
Walker Edison
TM
AF4DRISA
Copyright
2020
by Walker Edison Furniture Co., LLC. All rightsreserved.

P.2
General Assembly Guidelines
I.Ensurethatallpartsandhardwareareavailablebeforebeginning assembly.
II.Followeachstepcarefullytoensuretheproperassemblyof thisproduct.
21
III.Twopeoplearerecommendedforeaseintheassemblyof thisproduct.
IV.Thethreemaintypesofhardwareusedtoassemblethisproduct are: wood
dowels,screwsand bolts.
V.Theprovidedglueistosecurewooddowelsinplace.Whenfirstinserting dowels,
locatetheappropriateholeforthedowel,placeasmallamountofglue inthe hole
andinsertthedowel.Wipeawayexcessglue immediately.
Infutureassemblystepswhendowelsarenecessarytoattachassemblyparts
together,placeasmallamountofglueontheendofthedowelbefore attaching
partstogether.Wipeawayexcessglueimmediately.
VI.APhillipsheadscrewdriverisrequiredfortheassemblyof thisproduct.
VII.Powertoolsshouldnotbeusedtoassemblethisproduct.
.Concealedhingesarethree-wayadjustable.
Horizontal
byscrewadjustment In-and-Out
bylooseningthehinge-arm
mountingscreworviacam
adjustment
Vertical
Viaslotsinthemounting
plateorviacamadjustment
Door
Sidepanels Sidepanels Sidepanels
Door Door
VIII.Drillmaybeneededforsecuringproducttowall.
Copyright
2020
by Walker Edison Furniture Co., LLC. All rightsreserved.

P.3
PartsList
Copyright
2020
by Walker Edison Furniture Co., LLC. All rightsreserved.
1
2
34
5
6
7
8
9
10
11
12
13 x4
14
15
16
17
18
19
20
21
20
22
23
24
25
28
26
26
27

P.4
HardwareList
8x30mm WoodendowelA 30 pcs
6x35mm CamboltB 36 pcs
15x11mm CamlockC 38 pcs
30mm StickerD 38 pcs
6x50mm ScrewE 12 pcs
3x12mm ScrewF 56 pcs
M4 HexkeyG 1 pc
BoltH 12 pcs
6x25mm BoltJ 6 pcs
EuropehingeK 4 pcs
L 4 pcs
M 2 pcs
N 2 pcs
P24 pcs
Q
R
12 pcs
S
16 pcs
T
2pcs
U
1pc
V 1 pc
1 pc
Copyright
©
2020
by Walker Edison Furniture Co., LLC. All rightsreserved.
6x12mm
Handle
Cambolt
4x38mm Screw
4x12mm Screw
4x25mm Screw
Plasticstrap
Nut
W1 pc
Glasspad
Bolt
Bouncer
6x32mm
3x8mm
4x14mm Screw

HardwareList
The hardware quantities listed above are required for proper assembly.
Someextrahardware may also have been included.
Philipsheadscrewdriverrequiredforassembly
(notincluded)
Y
Gluetube
X
Drawerslider 4 sets
*Note:Thispiece comes preassembled for
shippingpurposesand must bedisassembled
tocompletethe deskassembly.
10''
2pcs
P.5
Copyright
2020
by Walker Edison Furniture Co., LLC. All rightsreserved.
Ø3x12mm ScrewZ 6 pcs

P.6
Step 1
Copyright
2020
by Walker Edison Furniture Co., LLC. All rightsreserved.
Disassemblydiagram
Assemblydragram
S
S
Disassembly: Holding the bottom bracket and then push out bouncer from one side to other side,
Assembly: Make sure the top of bouncer is aligned with the top of bottom bracket then press down
bouncer to bottom bracket as per diagram.

Step 2
P.7
Copyright
2020
by Walker Edison Furniture Co., LLC. All rightsreserved.
1
7
A
A
A
B
BB
B
B
ZZ
ZZ
Z
S
S
B
B
ZB
A
Insert wooden dowel (A) into part (7), and secure cam bolt (B) into part (1), then using screw (Z)
attach Bouncer (B) to parts (1,7) with Philips head screwdriver as per diagram.
Note: Please disassembly the Bouncer (S) follow up the step 1 as per diagram firstly before secure
screw .

Step 3
P.8
Copyright
2020
by Walker Edison Furniture Co., LLC. All rightsreserved.
564
2
A
A
A
A
A
A
A
AA
A
A
A
AA
A
A
A
A
AA
B
B
B
B
B
B
B
B
Insert wooden dowel (A) into parts (2,4,5,6), and secure cam bolt (B) into parts (2,4) with Philips
head screwdriver as per diagram.

Step 4
P.9
Copyright
2020
by Walker Edison Furniture Co., LLC. All rightsreserved.
8
A
A
M
M
3
3
A
A
B
B
B
A
A
11
Insert wooden dowel (A) into parts (3,8), and secure cam bolt (B) into part (3) and cam bolt (M) into
part (11) with Philips head screwdriver as per diagram.

Step 5
P.10
Copyright
2020
by Walker Edison Furniture Co., LLC. All rightsreserved.
Y
Y
Pick up the slider arm (Y) and separate the slide runner for the following Steps. Extend
the slide runner all the way forward,press the plastic release lever of the slider arm up
and pull the slide runner complete out .

P.11
Step 6
Copyright
2020
by Walker Edison Furniture Co., LLC. All rightsreserved.
x4
14 16
F
FFFF
F
YY
Using screw (F) attach drawer slider (Y) to parts (14,16) with Philips head screwdriver
as per diagram.

P.12
Step 7
Copyright
2020
by Walker Edison Furniture Co., LLC. All rightsreserved.
34
FFF
FFF
FFF
FFFFFF
FFF
FFF
FFF
Y
Y
Y
YY
Y
Y
Y
Using screw (F) attach drawer slider (Y) to parts (3,4) with Philips head screwdriver as per diagram.

Step 8
P.13
Copyright
2020
by Walker Edison Furniture Co., LLC. All rightsreserved.
10
27
G
H
Using bolt (H) attach part (27) to part (10) with Hex key (G) as per diagram.

Step 9
P.14
Copyright
2020
by Walker Edison Furniture Co., LLC. All rightsreserved.
9
25
26
26
28
G
J
J
J
J
Using bolt (J) attach part (9) to parts (25,26,28) with Hex key (G) as per diagram.

Step 10
P.15
Copyright
2020
by Walker Edison Furniture Co., LLC. All rightsreserved.
26 10
G
J
Using bolt (J) attach part (10) to part (26) with Hex key (G) as per diagram.

P.16
Step 11
Copyright
2020
by Walker Edison Furniture Co., LLC. All rightsreserved.
10
9
24
G
H
H
H
Using bolt (H) attach parts (9,10) to part (24) with Hex key (G) as per diagram.

21 3
3
7
C
C
Copyright
2020
by Walker Edison Furniture Co., LLC. All rightsreserved.
Step 12
P.17
Using Cam lock(C) secure part (7) to part (3) with Philips head screwdriver as per diagram.

Copyright
2020
by Walker Edison Furniture Co., LLC. All rightsreserved.
5
6
Step 13
P.18
Attach part (5) into part (6) as per diagram.

P.19
Step 14
Copyright
2020
by Walker Edison Furniture Co., LLC. All rightsreserved.
21 3
5
2
C
C
C
Using Cam lock(C) secure part (2) to part (5) with Philips head screwdriver as per diagram.

Step 15
P.20
Copyright
2020
by Walker Edison Furniture Co., LLC. All rightsreserved.
21 3
27
C
C
Using Cam lock(C) secure part (7) to part (2) with Philips head screwdriver as per diagram.