Walker Edison W58ELL4D User manual

P.2
General Assembly Guidelines
. Ensure that all parts and hardware are available before beginning assembly.
. Follow each step carefully to ensure the proper assembly of this product.
21
. Two people are recommended for ease in the assembly of this product.
V. The three main types of hardware used to assemble this product are : wood
dowels , screws and bolts.
V. The provided glue is to secure wood dowels in place . When first inserting dowels ,
locate the appropriate hole for the dowel , place a small amount of glue in the hole
and insert the dowel . Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together , place a small amount of glue on the end of the dowel before attaching
parts together . Wipe away excess glue immediately.
V . A Phillips head screwdriver is required for the assembly of this product .
V . Power tools should not be used to assemble this product .
V . Concealed hinges are three-way adjustable.
Horizontal
by screw adjustment
In-and-Out
by loosening the hinge-arm
mounting screw or via cam
adjustment
Vertical
Via slots in the mounting
plate or via cam adjustment
Door
Side panels
Side panels
Side panels
Door
Door
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.

P.3
Parts List
1
10
3
8
9
11 7
11
4
2
6
5
12
14
15
14
15
13
12
12
12
9
8
9
9
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.

A
B
C
D
E
F
G
H
J
K
pcs
pcs
pcs
L
M
N
24 pcs
Wooden dowel
Ø8x30mm
Cam lock
Ø15x11mm
Ø6x35mm Cam bolt
12
12
Ø6x50mm 13
Bolt
pcs
pcs
pc
pcs
1
Plastic wedge 22
12
Sticker
Screw
Ø3x17mm
M 4 Hex Key
22
Hardware List
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
Philips head screwdriver required for assembly
(not included)
P.4
pcs
Shelf support pin 8
pcs
pcs
4
Ø4x12mm Handle Bolt 8
Handle
pcs
Screw
Ø3.5x14mm 48
pcs
8
Europe hinge
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
P
Qpc
Glue tube 1
pcs
Washer 8

P.5
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 1
1
3
A
A
A
A
B
B
B
B
B
B
B
B
Insert wooden dowel (A) into part (3) ，then secure cam bolt (B) into parts (1,3) with Philips
head screwdriver as per diagram.

P.6
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 2
6
7
A
A
A
A
A
A
A
A
A
A
14 15
2 x
Insert wooden dowel (A) into parts (6,7,14,15) as per diagram.

Step 3
P.7
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
45
A
AA
A
A
A
A
A
B
BB
B
Insert wooden dowel (A) into parts (4,5) ，then secure cam bolt (B) into parts (4,5) with Philips
head screwdriver as per diagram.

Step 4
P.8
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
2
14
14
15
15
13
E
F
Using screw (E) secure parts(13,14,15) to part (2) with hex key (F) as per diagram.

P.9
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 5
3
7
E
F
Using screw (E)attach part (7) to part (3) with hex key (F) as per diagram .

P.10
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 6 21 3
3
5
C
C
Using cam lock(C) secure part (5) into part (3) with Philips head screwdriver as per diagram.

P.11
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 7 21 3
3
6
C
C
Using cam lock(C) secure part (6) into part (3) with Philips head screwdriver as per diagram.

P.12
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 8 21 3
3
4
C
C
Using cam lock(C) secure part (4) into part (3) with Philips head screwdriver as per diagram.

P.13
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 9
3
4
5
6
9
9
Put part (9) as per diagram.

Put part (8) as per diagram and keep part(9) edge in the groove of part (8).

P.15
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 11
5
6
8
9
8
9
Put part (9) as per diagram.

P.16
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 12
2
4
5
6
E
F
Using screw (E) attach part (2) into parts (4,5,6) with hex key (F) as per diagram .

P.17
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 13
3
4
5
10
Put part (10) as per diagram.

P.18
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 14 21 3
1
4
5
7
C
C
C
C
C
C
Using cam lock(C) secure part (1) to parts (4,5,7) with Philips head screwdriver as per diagram.

P.19
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 15
M
N
N
Using screw (M) secure plastic wedge (N) with Philips head screwdriver as per diagram.

Place sticker (D) cover the holes as per diagram .