Walker Edison W56VSD User manual

P.1
Item # : W56VSD
®
TM
Assembly Instructions
Revised 04/23/2018
Please visit our website for the most current instructions, assembly tips, report damage,
or request parts. www.walkeredison.com
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.

P.2
General Assembly Guidelines
I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
21
III. Two people are recommended for ease in the assembly of this product.
IV. The three main types of hardware used to assemble this product are : wood
dowels , screws and bolts.
V. The provided glue is to secure wood dowels in place . When first inserting dowels ,
locate the appropriate hole for the dowel , place a small amount of glue in the hole
and insert the dowel . Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together , place a small amount of glue on the end of the dowel before attaching
parts together . Wipe away excess glue immediately.
VI. A Phillips head screwdriver is required for the assembly of this product .
VII. Power tools should not be used to assemble this product .
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.

P.3
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
Parts List
1
11
12
11
9
10
9
34
5
6
2
78
8
7
13
14

Hardware List
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
A
Philips head screwdriver required for assembly
(not included)
P.4
B
C
D
E
F
G
H
J
K
pcs
pcs
pcs
pcs
pcs
pcs
pcs
L
M
N
P
Qpcs
16 pcs
Wooden dowel
Ø8x30mm
pcs
R
S
pcs
T
pcs
pcs
pcs
Door Hinge 2
Door Hinge 2
Plastic pivot 4
Cam lock
Ø15x11mm
Ø6x35mm Cam bolt
8
8
Ø6x50mm 8
Bolt
Screw
Ø3x17mm 12
Ø8x5x16mm 12
Shelf support pin
4
Screw
Ø3x12mm 8
1
Glue tube
Screw
Ø3x15mm
Plastic wedge 12
1
Ø30mm 8
Sticker
pcs
M 4 Hex Key
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
pcs
pcs
pcs
2
Door stopper 2
20
Bolt
Bolt
Ø6x12mm
U
10 pcs
Connector

Step 2
Step 1
P.5
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
1
34
56
A
A
A
A
A
A
A
A A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
Attach cam bolt (B) to part (1) with screwdriver.
Insert wooden dowel (A) into part (3,4,5,6).

Step 4
Step 3
P.6
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
2
2
3
4
5
6
3
4
5
6
11
11
12
F
H
Attach part (2) to part (3,4,5,6) using bolt (F) with hex key (H).
Slide back panel (11,12) into grooves as per diagram.

Step 6
Step 5
P.7
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
21 3
x 2
1
3
4
5
6
7
8
C
C
C
C
C
C
C
C
G
H
J
Attach part (1) to part (3,4,5,6), then insert and secure cam lock (C) to part (3,4,5,6) to lock it.
Attach connector (J) to part (7,8) using bolt (G) with hex key (H).

Step 8
Step 7
P.8
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
2
7
7
8
8
7
7
8
8
G
G
H
H
J
J
Attach connector (J) to part (7) using bolt (G) with hex key (H).
Attach connector (J) to part (2) using bolt (G) with hex key (H).

Step 10
Step 9
P.9
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
11
11
12
D
D
D
D
S
T
T
Attach plastic wedge (T) to part (11,12) using screw (S) with screwdriver.
Place sticker (D) over holes as per diagram.

Step 12
Step 11
P.10
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
1
3
4
5
6
E
EE
E
E
E
E
E
E
L
MM
Attach door stopper (L) to part (1) using bolt (M) with screwdriver.
Insert shelf support pin (E) into part (3,4,5,6).