Walker Edison BR58OSW6D User manual

Assembly Instructions
P.1
Please visit our website for the most current instructions, assembly tips, to report damage
or request parts. www.walkeredison.com
Copyright © 2018, by Walker Edison Furniture Co., LLC, All rights reserved.
Revised 12/2022
Item # : BR58OSW6D

P.2
I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
III. Two people are recommended for ease in the assembly of this product.
IV. The three main types of hardware used to assemble this product are wood
dowels, screws and bolts.
VI. A Phillips head screwdriver and hammer is required for the assembly of this product.
VII. Power tools should not be used to assemble this product.
V. ATTENTION, keep the box and its internal protections
-Use for protection when assembling
BOX
Styrofoam

Side panel
Right front foot
Left front foot
Smaller drawer runner
Top panel
Larger drawer runner
Bottom front crossbeam
Drawer bottom
Drawer back
Back panel
Left side drawer
Top crossbeam
Right back foot
Left back foot
Center foot
Base
Front drawer
1
16
8
2
17
19
9
3
18
10
4
11
5
12
6
13
7
14
15
01 pcs
06 pcs
Division
Right side drawer
02 pcs
01 pcs
01 pcs
06 pcs
02 pcs
01 pcs
01 pcs
01 pcs
01 pcs
06 pcs
02 pcs
06 pcs
01 pcs
06 pcs
01 pcs
06 pcs
06 pcs
Description Description Qty Qty Part# Part#
P.3
15
13
11
14
12
12 6x
3
3
2
2
4
8
9
9
8
8
9
9
8
8
7
10
16
17
19
18
6
6
9
9
8
1
5
The side drawer with WARNING LABEL,
should be mounted in highest drawer.

P.4
Tape measure and hammer
recommended for assembly
(not included)
A
C
B
D
L
K
M
E
F
G
H
I
J
N
O
Ø8*40mm
Ø8*20mm
Wooden dowel
Wooden dowel
24
24
pcs
pcs
Hex key
Foot support
52 pcs
Screw
Screw
‘’H’’ Profile
03
03
01
pc
pc
pc
Ø4,0*30mm
Ø4,0*20mm
Ø3,5*16mm
Ø15*09mm
Screw
Screw
Screw
Cam bolt
Cam lock
75
24
04
06
06
pcs
pcs
pcs
pcs
pcs
Ø8*8 Nail 28 pcs
01
01
pc
pc
Ø8*30mm Wooden dowel
Ø4,0*40mm
Ø7,0*50mm
1390 mm
CB 10
P
Wall anchor 01 pc
Q
Washer 02 pc
Ø6mm 01 pc
Hardware List
F

P.5
Step 1
Step 2
Please assemble on
Please assemble on
a clean soft surface
a clean soft surface
to avoid damage.
to avoid damage.
Ø8*30mm
Ø8*20mm
40
24
Insert wood dowel (B)
into parts (1, 4, 5, 12, 13).
Insert wood dowel (C)
into part (8,9).
B
B
B
B
BB
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
6x
6x
5
1
4
C
C
C
6x
8
C
C
6x
9
13
12
Attention to the
dowel size:
Ø8*20mm
B
C

P.6
Step 3
Step 4
2
A
A
A
A
A
A
2x
Please assemble on
a clean soft surface
to avoid damage.
Insert wood dowel (A)
into part (2).
E
E
Use screw (E,) to aach
parts (3) to part (16, 18),
with Phillips head screwdriver.
Ø8*40mm
12
A
16
3
E
18
3
Ø4,0*30mm
02
E
!

P.7
Step 5
Step 6
Please assemble on
Please assemble on
a clean soft surface
a clean soft surface
to avoid damage.
to avoid damage.
Use screw (E,) to aach
Heads up:
05 holes up
Heads up:
05 holes up
parts (2) to part (18).
Use screw (E) to aach
parts (2) to part (16),
E
E
E
E
E
E
2
18
3
2
16
3
with Phillips head screwdriver.
with Phillips head screwdriver.
Ø4,0*30mm
Ø4,0*30mm
03
03
E
E

P.8
Step 7
Step 8
17
L
L
L
M
M
E
E
E
3
2
Use screw (E) to aach
Use screw (M) to aach
part (17) to part (2),
parts (17) to part (3) whit
Hex Key (M)
making it the right side (20).
E
Please assemble on
a clean soft surface
to avoid damage.
L
E
E
E
Use screw (E) to aach
Use screw (M) to aach
part (19) to part (2),
parts (19) to part (3) with
Hex Key (M)
making it the right side (21).
19
3
2
Please assemble on
a clean soft surface
to avoid damage.
Ø4,0*30mm
Ø4,0*30mm
Ø7,0*50mm cb 10
Ø7,0*50mm cb 10
03
03
01
01
E
E
L
L
M
M
01
01
with Phillips head screwdriver.
with Phillips head screwdriver,
E

P.9
Step 9
Step 10
H
H
H
H
H
H
06
20
21
Please assemble on
a clean soft surface
to avoid damage.
Insert cam bolt (H) to part (20, 21).
H
FØ4,0*20mm 12
Use screw (F) to aach part (8) to
parts (20, 21) with Phillips head
screwdriver.
F
F
F
F
F
F
F
F
F
F
F
F
8
8
8
21
20
8
8
8
face the top of parts (20,21)
NOTE: The extra holes in part (8) should
F
with Phillips head screwdriver.
H

P.10
Step 11
Step 12
Use screw (D) to aach part (4) to part
(5) with Phillips head screwdriver.
4
4
5
5
D
D
D
Put protection so that no damage occurs
Use screw (F) to aach part (9) to part (5)
F
F
F
F
F
F
5
9
9
9
F
F
F
F
F
F5
9
9
9
face the top of parts (20,21)
NOTE: The extra holes in part (5) should
F
F
D
Ø4,0*20mm
Ø4,0*40mm
12
03
with Phillips head screwdriver.

P.11
Step 13
Step 14
Ø15*09mm
J
1st
2nd
3nd
Secure parts (1) to part (20).
Insert cam locks (I) into part (1)
and ghten with a phillips head
screwdriver.
Put protection so that no damage occurs
Use screw (E) to aach
parts (1) to part (5) with
E
E
E
1
1
5
5
E
1
4
I
I
I
E
E
E
20
Ø4,0*30mm
Ø4,0*30mm
03
03
03
E
E
I
Phillips head screwdriver.
I20
part (4) to part with a phillips head screwdriver
Use screw (E) to aach part (20) to aach

P.12
Step 15
Step 16
E
E
7
20
Ø4,0*30mm 03
E
Use screw (E) to aach part (7) to part (20)
with a phillips head screwdriver.
I
Use screw (E) to aach part (7) to part (21) ghten with a phillips head screwdriver
Aach part (4) to part (21) with a phillips head screwdriver
I
I
I
E
E
E
E
21
7
4
1
1st 2nd 3nd
Secure parts (1)to part (21).
Insert cam locks (I) into part (1)
and ghten with a phillips head
screwdriver
21
Ø15*09mm
Ø4,0*30mm 03
03
E
I

P.13
Step 17
Step 18 Put protection so that no damage occurs
10
G
G
G
Use screw (G) to aach part (10) to part (4)
G
G
GG
10
4
Put protection so that no damage occurs
!
N
Use the screw (L) to aach the foot
support (O) to the center foot (10).
Use the hex key (N) for this. 10
M
L
N
Ø7,0*50mm cb 10
L
M
01
01
01
Ø3,5*16mm
04
G

P.13
Step 19
Step 20
Insert wood dowel (B) into the
front hole in the drawer rails (8 & 9)
B
FRONT
B
B
B
B
B
B
B
B
B
B
B
B
Put protection so that no damage occurs
6
6
J
J
and secure back panel (6) with part (J)
and hammer.
Place the profile (K) between the panels
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
J
K
KJ
J
J
J
06
06
1390mm
Name and
address of
the supplier
and date of
production.
Ø8*8mm
J28
K01
°
0
9
Ø8*30mm
12
B

P.15
Step 21
Step 22
Insert panel (14) into parts (12, 13). Secure part (15)
to part (12, 13) with a phillips head screwdriver.
E
E
E
E
15
14
12
13
6x
Put protection so that no damage occurs
Put protection so that no damage occurs
E
E
E
11
12
13 6x
E
Atach parts (12,13) to part (11), with screws(E)
and philips head screwdriver.
Ø4,0*30mm
Ø4,0*30mm
24
24
E
E

P.16
Step 23 Put protection so that no damage occurs
The assembled drawer with
this warning must be placed
on top of the unit.
Insert wood dowel (A) on the inside of
all drawers, with the drawer inside the
unit, aer having passed the wood
dowel that is in the runner.
A
A
Ø8*40mm
12
A
A

=
=
P.16
Ø6mm
WARNING
Serious or fatal injuries can occur from furniture tipping over. To prevent the
furniture from tipping over we recommend that it is permanently fixed to the wall.
Wall anchor and hardware are included with this product.
Please make sure hardware is suitable for your walls before installing, as different
wall materials may require different types of anchors.
Attach screw (G) into washer (P),
securing wall anchor (M) at the top
middle part (1).
Drill your wall with a 6mm drill (not included)
and insert hardware (Q), securing wall anchor
(O) gift asher (P) and screw (E) in the wall.
Q01
E
G
01
01
Ø4,0*30mm
Ø3,5*16mm
P02
O01
Back panel
Top
1º
G
P
O
Top
Wall
2º
O
P
E
Q
Name and address information for the manufacturer responsible
for the anti-tip hardware and date of production can be found on
the label on the back of the furniture.
Step 24

Step 25
Assembly Complete!
Maintenance Guide
To maintain long term performance and easy gliding of your solid wood drawers,
we recommend applying wax to the wooden guide rails.
1. Bee's wax is recommended or Paraffin wax from a standard candle can be used.
2. Apply the wax by rubbing it on the wooden guide rails where there is wood-on-wood
contact when opening and closing the drawer. (Wax should be room temperature, do
not melt the wax onto the wood)
3. Wax should be applied every few months for the first year and then only when
needed aer that to keep the drawers sliding smoothly.
P.18
20
lbs
75
lbs