Walker Edison BU58HPBM User manual


 


 

 P.1
Item#: BU58HPBM
Assembly Instructions

Insert wooden dowel (A) and secure cam bolt (C) to side panel (3,4,5).
Secure cam bolt (C) to top panel (1).

Insert wooden dowel (A) into shelf (6).
Insert side panel (3) into shelf (6), then insert and secure cam lock (B) to shelf (6) to lock it.

Insert side panel (5) into shelf (6), then insert and secure cam lock (B) to shelf (6) to lock it.
Insert side panel (5) into shelf (6), then insert and secure cam lock (B) to shelf (6) to lock it.

Insert side panel (4) into shelf (6), then insert and secure cam lock (B) to shelf (6) to lock it.
Slide back panels (8) into grooves as per diagram.

Use wrench (H) to secure bottom panel (2) to side panel (3,4,5) with bolt (D).
Use wrench (H) to secure leg (7) to bottom panel (2) with bolt (S). Repeat this step five times.

Slide back panels (8) into grooves as per diagram.
Insert top panel (1) into side panel (3,4,5), then insert and secure cam lock (B) to side panel
(3,4,5) to lock it.

Secure plastic wedge (J) to back panel (8) with screw (K).
Place sticker (F) over holes as per diagram.

Secure door stopper (E) to top panel (1) with screw (G).
Place plastic pivot (R) over holes as per diagram.

Secure handle (L) to door (9,10) with handle bolt (M), and secure bolt (N) to door (9,10).
Repeat this step.
Secure door hinge (P) to door (10) and door hinge (Q) to door (9) with screw (T). Repeat this
step.

Insert door hinge (P,Q) into panel hole as per diagram.
Slide door (9,10) onto door hinge as shown in diagram and secure it with screw (T).
Insert door hinge (P,Q) into panel hole as per diagram.
Slide door (9,10) onto door hinge as shown in diagram and secure it with screw (T).