Walker Edison BWSTOT User manual

Item# :BWSTOT
Assembly Instructions
  
 
Revised 03/2017
Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reseed. P.1

Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.

Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.

Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.

Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.

Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.
Insert small wood dowels (7) into slats (F,S,G) as shown in the diagram.
Insert small wood dowels (7) into slats (M,N) and ladder steps (Q) as shown in the diagram.

Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.
Secure legs (A,B) to slats (F,S,G) using joint connectors (3) as shown in the diagram,then
secure legs (A,C) to slats (F,S,G) using joint connectors (3) .
Secure legs (E,D) to slats (F,S,G) using joint connectors (3) as shown in the diagram.

Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.
Secure cross beams (I,K) to lower end frames using barrel nuts (8) and joint connectors (1)
as shown in the diagram.
Using the spacer (U) as a guide,secure slats (L) evenly spaced to the bed frame using large
wood screws (4) as shown in the diagram.

Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.
Secure cross beams (H,J) to upper end frames using barrel nuts (8) and joint connectors (1)
as shown in the diagram. Secure slats (M) to upper end frame using joint connectors (3)
as shown in the diagram. Please make sure the Warning Label must be face inside the bed
as shown in the diagram.
Using the spacer (U) as a guide,secure slats (L) evenly spaced to the bed frame using large
wood screws (4) as shown in the diagram.

Copyright © 2016, by Walker Edison Furniture Co., LLC. All rights reserved.
Secure slats (N) to upper end frames using joint connectors (3) as shown in the diagram.
Secure support beams (R) to the slats using small screws (5) as shown in the diagram.
Secure ladder supports (O,P) to ladder steps (Q) using joint connectors (2) as shown in the
diagram.