Walker Edison LEEB3B User manual

Assembly Instructions
Copyright © 2018, by Walker Edison Furniture Co., LLC, All rights reserved.
Please visit our website for the most current instructions, assembly tips, to report damage
or request parts. www.walkeredison.com
Revised 06/2022
P.1
LEEB3B

I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
III. Two people are recommended for ease in the assembly of this product.
IV. The three main types of hardware used to assemble this product are wood
dowels, screws and bolts.
V. The provided glue is to secure wood dowels in place. When first inserting dowels, locate
the appropriate hole for the dowel, place a small amount of glue in the hole and insert
the dowel. Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts together,
place a small amount of glue on the end of the dowel before attaching parts together.
Wipe away excess glue immediately.
VI. A Phillips head screwdriver and hammer is required for the assembly of this product.
VII. Power tools should not be used to assemble this product.
General Assembly Guidelines
P.2

P.3
Top panel
1 0 pcs1
Left side panel
2 01 pcs
Right side panel
3 01 pcs
40 pcs1
705 pcs
14 0 pcs1
Drawer Left Side
10 0 pcs2
Description QtyPart# Description QtyPart#
Drawer Right Side
11 0 pcs5
12 0 pcs5
Drawer bottom
13 10 pcs
801 pcs
5x
16 0 pcs4
15 0 pcs5
Back anelp
5 01 pcs
Parts List
Base panel
Drawer runner
Crossbeam
Drawer back
Top crossbeam
Bottom side crossbeam
Leg
12
9 0 pcs2
Bottom front crossbeam
6 05 pcs
Drawer front
6
11
7
15
The side drawer with
WARNING LABEL,
nshould be mou ted
in highest drawer. 12
2
910
10
16
16
16
16
14
9
4
13
13
13
13
13
1
8
513
13
13
13
3
13

Philips head screwdriver required for assembly
(not included)
Hammer recommended for assembly
(not included)
Hardware List
A
B
C
D
E
F
G
H
J
K
L
M
Ø8*20mm Wood dowel 20 pcs
Ø8*30mm Wood dowel 62 pcs
Ø3,0*12mm Screw 18 pcs
Ø4,0*25mm Screw 20 pcs
Ø6mm 01 pc
Ø7,0*70mm Screw 04 pcs
-Hex Key 01 pc
- Handle 05 pcs
Washer 02 pcs
Ø4,0*30mm Screw 59 pcs
Ø4,0*40mm Screw 14 pcs
I- Glue 01 pc
Wall anchor 01 pc
-
NScrew 06 pcs
Ø3,5* mm20
P.4
-
-
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
O-Corner 04 pcs

Insert wood dowel (B) and glue ( )I
1 3 4 , (5), (8), 9 1 and 2 .into part ( ), ( ), ( ) ( ), (1 ) (1 )
Insert ood dowel ( ) into part ( ).w A and glue ( ) 13I
Step 1
P.5
B
B
B
3
5x
11
B
B
5x
12
B
B
Please assemble on
a clean soft surface
to avoid damage.
B
B
B
B
8
1
B
B
B
B
B
B
B42
Ø8*30mm
A20
Ø8*20mm
I01
B
B
2x
9
A
A
13
10x
A
B
BB
B
5
4
B
B
B

D
D
D
D
D
D
3
13
13
13
D
D
D
D
13
13
Step 3
D
D
D
D
D
D
4
13
13
13
Secure parts (13) to part (3) and (4)
with screw (D) and screwdriver (not included).
D
D
D
D
13
P.6
4
D
1
13
TOP
TOP
D20
Ø4,0*25mm
E04
Ø4,0*30mm
E
E
E
E
Step 2
Secure part (1) to part ( )and (5) 4 Ewith screw ( )
and screwdriver (not included).
Please assemble on
a clean soft surface
to avoid damage.
4
13
5E

Step 5
P.7
E
E
E
E06
Ø4,0*30mm
8
E
E
E
9
16
16
F
F
2x
F04
Ø4,0*40mm
1
3
Step 4
Secure parts (1), (5) and (8) to part (3) with screw
(E) and screwdriver (not included).
Secure part ( ) to part ( ), with screw ( )9 s 16 F
and screwdriver (not included).
4
F
9
5
E

Step 6
F
F
9
10
10
Step 7
F
F
10
10
9
16
16
16
16
P.8
F02
Ø4,0*40mm
F02
Ø4,0*40mm
Secure part ( ) to part ( ), with screw ( ) and screwdriver (not included).10 s 16 F
Secure part (10) to parts (16),
Fwith screw ( ) and
screwdriver (not included).
F
F

Step 8
P.9
Ø * 0mm7,0 7
G
16
16
16
2
G
G
G
Step 9 Secure part ( ) to part ( ) with screw ( )2 3 and (4) F
and screwdriver (not included).
2
F
F
F
F
F
F
4
3
G04
H01
F06
Ø4,0*40mm
G
H
Secure part (2) to part (16)
.with screw (G) and hex key (H)
2
F
3

Step 11
E
E
E
E
E
E
E
10
10
E06
Ø4,0*30mm
E
Step 10
Secure part (10) to part (2) and attachs (9) and
with screw (E) and screwdriver (not included).
2
9
9
Secure part ( ) to part ( ) with screw (E)8 1
and screwdriver (not included). E01
Ø4,0*30mm
8
E
1
P.10

Step 13
Secure back panel (14) as show at
above to body with screw (N) and screwdriver (not included).
P.11
Ø3,5*20mm
N06
Step 12
N
N
N
N
N
N
14
Name and address of
the supplier and date of
production.
N
10
2
9
O04
C08
Ø3,0*12mm
Joint parts (3), (4) and (14) using metal corner (O)
and screw (C) and screwdriver (not included).
C
14
3
3
4
14 O
O
O
O
C
O

P.12
Step 15
Step 14
EE
E
E
12
6
7
6
15
5x
6
11
12
E
E
7
11
12
C
C
J
Secure part (11) and (12) to part (6)with screw (E)
and screwdriver (not included).
Insert part (15) and (7) between parts (11) and (12).
Secure part (7) with screw (E) and screwdriver (not included).
5x
EE
11
E40
Ø4,0*30mm
C10
Ø3,0*12mm
J05
Secure handle (J) with screw (C) and screwdriver (not included),
in the pre holes on the drawer front.
E
E
C

Step 16
B
B
B
B
B
P.13
Step 17
Insert ood dowel ( ) into part ( )w B 13
to be the stop of the drawer.
B
B
B
B
B
B
B
Drawer Stop
Make sure dowel is flush
with panel. Insert wood
Bdowel ( ) on the inside of
all drawers while drawer
is inside the unit.
B
B10
Ø8*30mm
B10
Ø8*30mm
B
B
B
The side drawer wit WARNING LABEL,
nshould be mou ted in highest drawer.
13
B
B

Step 18
Ø6mm
Back panel
Top
Top
Wall
1º 2º
E
L
M
M
L
E
K
=
=
P.14
WARNING
Serious or fatal injuries can occur from furniture tipping over. To prevent the
furniture from tipping over we recommend that it is permanently fixed to the wall.
Wall anchor and hardware are included with this product.
Please make sure hardware is suitable for your walls before installing, as different
wall materials may require different types of anchors.
Name and address
information for the
manufacturer responsible for
the anti-tip hardware and date
of production can be found on
the label on the back of the furniture.
Attach screw (E) into washer (L),
securing wall anchor (M) at the top
middle part (1).
Drill your wall with a 6mm drill (not included)
and insert hardware (K), securing wall anchor
(M) gift asher (L) and screw (E) in the wall.
K01
E02
Ø4,0*30mm
L02
M01

Assembly Complete!
Maintenance Guide
To maintain long term performance and easy gliding of your solid wood drawers,
we recommend applying wax to the wooden guide rails.
1.Bee's wax is recommended or Paraffin wax from a standard candle can be used.
2.Apply the wax by rubbing it on the wooden guide rails where there is wood-on-wood
contact when opening and closing the drawer. (Wax should be room temperature, do
not melt the wax onto the wood)
3.Wax should be applied every few months for the first year and then only when
needed after that to keep the drawers sliding smoothly.
75
lbs
Step 19
P.15
20
lbs