Walker Edison TW60M User manual

Item #: TW60M
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
Revised 12/2011

General Assembly Guidelines
I. Insure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to insure the proper assembly of this product.
III. Two people are recommended for ease in the assembly of this product.
IV. The main types of hardware used to assemble this product are wood dowels, nuts, bolts
and washers.
V. Power tools should not be used to assemble this product.
P.2

Parts List

Hardware List
Wrench
Foot

Assembly Options
Option A
To build this option, follow Steps 1-6.
Option B
To remove the table leaf, follow Steps 7-10.

Insert dowels (A) into crossbar (3).
Insert nut (C) into crossbar (3). Attach crossbar (3) to leg piece (2) using bolt (B). Tighten bolt (B) with wrench
(H). Bolt (B) will screw directly into nut (C).

Insert nut (C) into opposite end of crossbar (3). Attach crossbar (3) to second leg piece (2) using bolt (B).
Tighten bolt (B) with wrench (H). Bolt (B) will screw directly into nut (C).
Screw feet (G) into leg pieces (2). Insert end caps (4) into leg pieces (2) using pre-inserted dowels as guides.

Attach leg pieces (2) to table top (1) using bolts (D), spring washers (E) and washers (F). Tighten all bolts (D)
with wrench (H).
Option A
Final Assembly

Carefully pull table apart.
Carefully remove center leaf from table.

Carefully push table back together.
Option B
Final Assembly