Walker Edison W58SBD User manual

P.1
Item # : W58SBD
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
Assembly Instructions
Revised 04/23/2018
Please visit our website for the most current instructions, assembly tips, report damage,
or request parts. www.walkeredison.com

P.2
General Assembly Guidelines
I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
21
III. Two people are recommended for ease in the assembly of this product.
IV. The three main types of hardware used to assemble this product are : wood
dowels , screws and bolts.
V. The provided glue is to secure wood dowels in place . When first inserting dowels ,
locate the appropriate hole for the dowel , place a small amount of glue in the hole
and insert the dowel . Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together , place a small amount of glue on the end of the dowel before attaching
parts together . Wipe away excess glue immediately.
VI. A Phillips head screwdriver is required for the assembly of this product .
VII. Power tools should not be used to assemble this product .
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.

P.3
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
Parts List
1
2
3
4
56
11
12
11
13
14
13
15
16
17
7
8
9
10
19
18
20
20
22
21

Hardware List
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
A
Philips head screwdriver required for assembly
(not included)
P.4
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved.
30 pcs
Wooden dowel
Ø8x30mm
B
C
D
E
F
G
H
J
K
R
S
5
pcs
pcs
pcs
Cam lock
Ø15x9.5mm
Ø6x32mm
Bolt
Ø1/4x30mm
Cam bolt
21
21
pcs
Ø6x50mm 10
Bolt
pcs
Screw
Ø3x17mm 12
pcs
Plastic wedge 12
pcs
M 4 1
Hex hey
pcs
Ø30mm 21
Sticker
pcs
L
pcs
Screw
Ø4x12mm 8
M
N
P
Q
12 pcs
Bolt
Ø6x12mm
pcs
Ø5x16mm 12
Shelf support pin
pcs
Plate 4
pcs
Bolt 8
pcs
Pulley 4
pcs
Handle 2
pcs
56x27x27mm 6
Connector
Ø1/4x12mm
T
pcs
1
Glue tube
Bolt 4
Ø4x19mm
U

Step 2
Step 1
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved. P.5
1
H
H
H
H
H
H
H
H
H
H
H
A
A
A
A
B
P
B
B
B
B
15
15
16
Attach cam bolt (H) to part (1) with screwdriver.
Insert wooden dowel (A) into part (15). Attach part (15) to part (16) using bolt (B) with
hex key (P).

Step 4
Step 3
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved. P.6
H
H
H
H
H
H
H
H
H
H
4
A
A
A
AA
A
3 6
5
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
9
8
10
7
Insert wooden dowel (A) into part (3,4,5,6).
Attach cam bolt (H) to part (7,8,9,10) with screwdriver.

Step 6
Step 5
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved. P.7
Q
C
Q
C
PQ
C
Q
C
Q
C
Q
C
C
QP
Q
C
17
18
19
17
18
19
Attach connector (Q) to part (17,18,19) using bolt (C) with hex key (P).
Attach connector (Q) to part (17) using bolt (C) with hex key (P).

Step 8
Step 7
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved. P.8
21 3
20
20
P
J
J
2
Attach part (20) to part (2) using bolt (J) with hex key (P).
Attach part (7,8,9,10) to part (3,4,5,6), then insert and secure cam lock (G) to part (3,4,5,6)
to lock it.

Step 10
Step 9
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved. P.9
21 3
G
G
7
8
9
10
15
3
4
5
6
2
J x8
P
Attach part (7,8,9,10) to part (15), then insert and secure cam lock (G) to part (15) to lock it.
Attach part (2) to part (3,4,5,6) using bolt (J) with hex key (P).

Step 12
Step 11
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reserved. P.10
P
C x4
Q
13
14
13
3
4
56
2
17
18
19
Attach connector (Q) to part (2) using bolt (C) with hex key (P).
Slide back panel (13,14) into grooves as per diagram.