Walker Edison AH52APC User manual

Revised 05/2016

Insert the wooden dowel (A), cam bolts (B) to the top panel (1), middle panel (5),and support
panel (6).
Insert the wooden dowel (A) and cam bolt (B) to the side panel (3)(4).

Insert the wooden dowel (A), cam bolt (B) to the bottom panel (2). Insert the cam bolt (C)
to the wooden skirt (7).
Attach the support panel (6) to the middle panel (5) and secure it by using cam lock (D).

Attach the wooden skirt (7) to the bottom panel (2) and secure it by the cam lock (D).
Assemble the leg (8) to the bottom panel as shown.
Attach the bottom panel (2) to the support panel (6) and secure it by using the cam lock (D).

Attach the side panel (3) to the middle (5) and bottom panel (2) and secure it by using the
cam lock (D).
Repeat step 7 for the side panel (4).

Place the top panel (1) on top of the side panel (3)(4) and secure it by using cam lock (D).
Attach the back panel (9) to the unit and secure it by screw (K).

Attach the back panel (10) to the unit and secure it by screw (K).
Cover all the cam locks wit stickers (M).

Insert the support pin (G) to the unit as shown and place the adjustable shelf (14)(15) on top.
Attach the door hinge (E) to the door and secure it by screw (F).

Repeat step #14 for the other door.
Attach the door handle (J) to the door and secure it by screw (H).

Repeat step #16 for the other doors.
Assemble the door to the unit and secure it with screw (F). Stick the plastic stopper (L)
on the edge of the adjustable shelf.

Repeat step #18 for the other door.