Walker Edison D36ARLO User manual

Insert wooden dowel (J) into part (11,13,14), secure cam bolt (L) to part (12) with screwdriver.

Insert part (11,14,13) to part (12), then secure cam lock (K) to part (11,14,13) with screwdriver.

Insert part (17) to part (12) as per diagram.

Attach part (4) to part (11,14,13) using bolt (H) with hex key (C).

Attach plastic wedge (R)
to part (17) using screw (S) with screwdriver.

Attach part (5) to part (4) using bolt (B) with hex key (C).

Attach part (8,9) to part (1), part (9,3) to part (2) using bolt (A,B) with hex key (C).

Attach part (15) to part (6), part (16) to part (7).

Attach part (15,6) to part (1,9,8), part (5,4), part 10 using bolt (B) with hex key (C).

Attach part (15) to part (3,2,9) using bolt (B) and screw (N) with hex key (C) and screwdriver.

Attach part (16,7) to part (9,8,5,3,10) using bolt (B) and screw (N) with hex key (C) and
screwdriver.

Attach plate (P) and corner plate (Q) to part (12,5) using screw (N) with screwdriver.

Place sticker (M) over holes as per diagram.

Attach bracket (E) to part (8) using bolt (A) with hex key (C).

1. Measure height for bracket in desired location.
2. Drill hole using 6mm size bit.
3. Insert wall anchor (G) into wall at desired location.
*Wall anchor included for drywall mounting. Use correct wall anchor and hardware for your
wall material.

Secure furniture to wall anchor (G) in wall using washer (D) and screw (F) with screwdriver.