Walker Edison DHW46 User manual

ITEM # : DHW46
Assembly Instructions

 

  P.1

Insert dowels (A) into panels (2, 3, 4, 5, 6, 7) as shown in the diagram. Remember to apply
a small drop (F) to the dowels as shown in the diagram.
Screw cam bolts (B) into top panel(1) using a screwdriver as shown in the diagram.

Attach panels (2, 3) to shelf (6) ,then insert and tighten cam locks (C) into shelf (6) as shown
in the diagram. Attach panels (4, 5) to shelf (7) , then insert and tighten cam locks (C) into
shelf (7) as shown in the diagram.
Attach the top panels (1) to the shelf assemblies as shown in the diagram. Insert and tighten
cam locks (C) into panels (2, 3, 4, 5) as shown in the diagram.

Cover cam locks with plastic covers (D) as shown in the diagram.
Slide divider panels (8) into the slots on shelf (6) as shown in the diagram.

Attach back panel (9) to the frame assembly using screws (E) as shown in the diagram.