Walker Edison TW72AMX User manual

P.1
AssemblyInstructions
Copyright
2020
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
Please visit our websitefor the most current instructions, assemblytips, report damage,
or request parts. www.walkeredison.com
Revised 12/08/2020 (L)
Walker Edison
TM
Item #: TW72AMX

General Assembly Guidelines
I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
III. Two people are recommended for ease in the assembly of this product.
IV. The main type of hardware used to assemble this product are: bolts and screws.
V. ower tools should not be used to assemble this product.
.2
VI. Drill may be needed for securing product to wall.
Copyright
©
2020
, by Walker Edison Furniture Co., LLC. All rights reserved.

.3
Parts List
Copyright
©
2020
, by Walker Edison Furniture Co., LLC. All rights reserved.
1
2
3
3

A
B
C
D
Lockwasher 6 pcs
Bolt 8 pcs
Wrench 1pc
Flatwasher 14 pcs
P.4
Copyright
2020
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
HardwareList
The hardware quantities listed above are required for proper assembly.
Someextrahardware may also have been included.
M4mm
E
1pc
Hexkey
F
Bolt 6 pcs
M8x40mm
M6x20mm
M12mm
1/4"
5/16"

P.5
Copyright
2020
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
Step 1
2
3
A
A
E
D
D
Insert part (2) to part (3) ,then using bolt (A) attach flat washer (D) into part (3) to part (2) with
wrench (E) as per diagram.
Note:Please do not fully tighten all bolts.

P.6
Copyright
2020
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
Step 2
AE
2
3
A
D
D
Place part (3) to part (2) ,then using bolt (A) attach flat washer (D) into part (3) to part (2) with
wrench (E) as per diagram.

.7
Copyright
©
2020
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
Step 3
F
B
C
D
1
3
3
Using bolt (B) attach Lock washer (C) and Flat washer (D) into part (3) to part (1) with Hex key (F)
as per diagram.
Note: Please fully tighten all bolts.

.8
Copyright
©
2020
b
y
Walker Edison Furniture Co., LLC. All rights reserved.
Step 4
Position the assembled unit at the desired location ,if necessary adjust the floor leveler at the
bottom of the leg to level the unit .

FinalAssembly
P.9
Copyright
2020
b
y
Walker Edison Furniture Co., LLC. All rightsreserved.
Step 5