Walker Edison WQ44CFD User manual

Item #: WQ44CFD
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
Revised 02/2011

General Assembly Guidelines
I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
III. Two people are recommended for ease in the assembly of this product.
IV. The main types of hardware used to assemble this product are: wood dowels,
cam bolts and locks, bolts and screws.
V. The provided glue is to secure wood dowels in place. When first inserting dowels,
locate the appropriate hole for the dowel, place a small amount of glue in the hole
and insert the dowel. Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together, place a small amount of glue on the end of the dowel before attaching
parts together. Wipe away excess glue immediately.
VI. A Phillips head screwdriver is required for the assembly of this product.
VII. Power tools should not be used to assemble this product.
P.2

Parts List

Hardware List
Long bolt
Door stopper plate
Door hinge
Door hinge
Short bolts

Screw cam bolts (B) into stand top (1).
Screw cam bolts (B) into panel (2). Insert dowels (A) into slat (17).

Attach slat (17) to panel (2) using cam bolts and dowels as guides. Insert cam locks (C) into slat (17) and
tighten with a screwdriver.
Insert dowels (A) into panels (2,3,4,15) and shelf (9). Screw cam bolts (B) into panels (2,3,4) and shelf (9).

Insert dowels (A) into slat (10). Attach block (13) to slat (10) using screws (F). Attach door stopper (D) to block
(13) using screws (E).
Screw cam bolts (B) into legs (5,6,7,8). Insert dowels (A) into legs (5,6,7,8).

Attach support leg (16) to panel (2) using long bolts (G). Tighten long bolts (G) with wrench (S). Attach panel
(15) to panel (2) using cam bolts and dowels as guides.
Insert cam locks (C) into panel (15). Attach shelf (9) to panel (15) using cam bolts and dowels as guides.
Tighten cam locks (C) with a screwdriver.

Attach legs (5,6) to panel (3) using cam bolts and dowels as guides. Insert cam locks (C) into panel (3) and
tighten with a screwdriver.
Attach legs (7,8) to panel (4) using cam bolts and dowels as guides. Insert cam locks (C) into panel (4) and
tighten with a screwdriver.

Attach the panel (2,9) assembly to the panel (3) assembly using cam bolts and dowels as guides. Insert cam
locks (C) into panel (2) and shelf (9) and tighten with a screwdriver. Two cam locks (C) will be inserted into
panel (2) and into shelf (9).
Attach slat (10) to the assembly from the previous step using cam bolt and dowel as guides. Insert cam lock (C)
into slat (10) and tighten with a screwdriver. Slide back panel (14) into place along the grooves at the back of
the frame assembly.