Walker Edison W60C73-MT User manual

Item #: W60C73-MT
Assembly Instructions
For our most current instructions, to request missing, lost or broken parts, or for any other Customer
Service issues, please visit our website at www.walkeredison.com or call us at 877-207-5906.
Revised 02/2012

General Assembly Guidelines
I. Insure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to insure the proper assembly of this product.
III. Two people are recommended for ease in the assembly of this product.
IV. The main types of hardware used to assemble this product are wood dowels, cam
bolts and locks, bolts and screws.
V. The provided glue is to secure wood dowels in place. When first inserting dowels,
locate the appropriate hole for the dowel, place a small amount of glue in the hole
and insert the dowel. Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together, place a small amount of glue on the end of the dowel before attaching
parts together. Wipe away excess glue immediately.
VI. A Phillips head screwdriver is required for the assembly of this product.
VII. Power tools should not be used to assemble this product.
P.2

Parts List

Hardware List
Bolt
Bolt
Door stopper plate

TV Mounting Hardware List
TV Mounting Parts List
Bolt
Washer
Adjustment knob

Screw cam bolts (B) into stand top (1). Attach door stoppers (G) to stand top (1) using screws (H).
Screw cam bolts (B) into panels (3,4,5,6). Note that one cam bolt (A) will be screwed into each side of panels
(5,6). Insert dowels (C) into panels (3,4,5,6), slat (7) and shelves (9).

Insert dowels (C) into shelves (13) and panels (14,15,17,18). Screw cam bolts (B) into panels (14,15,17,18).
Screw cam bolts (B) into doors (16,19). Attach door stopper plates (J) to doors (16,19) using screws (K).
Attach handles (P) to doors (16,19) using bolts (Q).

Attach panels (14,15) to shelves (13) using cam bolts and dowels as guides. Insert cam locks (A) into shelves
(13) and tighten with a screwdriver. Note that two cam locks (A) will be inserted into each shelf (13).
Insert dowels (C) into feet (20) and back panel (10).

Attach panels (17,18) to the second set of shelves (13) using cam bolts and dowels as guides. Insert cam
locks (A) into shelves (13) and tighten with a screwdriver. Note that two cam locks (A) will be inserted into
each shelf (13).
Attach the panel assembly (14,15) to door (16) using cam bolts and dowels as guides. Insert cam locks (A)
into panels (14,15) and tighten with a screwdriver.

Attach the panel assembly (17,18) to door (19) using cam bolts and dowels as guides. Insert cam locks (A)
into panels (17,18) and tighten with a screwdriver.
Insert cam locks (A) into slat (7). Attach panels (5,6) to slat (7) using cam bolts and dowels as guides. Tighten
cam locks (A) with a screwdriver.

Attach shelf (9) to panel (6), then panel (4) to shelf (9) using cam bolts and dowels as guides. Insert cam locks
(A) into shelf (9) and tighten with a screwdriver.
Attach shelf (9) to panel (5), then panel (3) to shelf (9) using cam bolts and dowels as guides. Insert cam locks
(A) into shelf (9) and tighten with a screwdriver.
6
6

Carefully slide back panel (10) into place along the back of the stand assembly. Use cam bolts and dowels as
guides. Insert cam locks (A) into back panel (10) and tighten with a screwdriver.
Attach the panel assembly from the previous step to stand top (1) using cam bolts and dowels as guides.
Insert cam locks (A) into panels (3,4,5,6) and tighten with a screwdriver. Note that two cam locks (A) will be
inserted into each panel (3,4,5,6).
1

Attach stand supports (21) to stand base (2) using bolts (E). Tighten bolts (E) with wrench (F).
Carefully slide back panels (11) into place along the grooves at the back of the stand assembly.

Attach feet (20) to stand base (2) using dowels as guides.
Attach stand base (2) to the stand assembly using bolts (E). Tighten bolts (E) with wrench (F).
2
2

Attach door hinges (L) to panels (3,4) using screws (M,N).
Attach door assembly (14,15) to the stand assembly at door hinges (L) using screws (M).

Attach door assembly (17,18) to the opposite side of the stand assembly at door hinges (L) using screws (M).
Insert shelf support pins (I) into the stand assembly at desired shelf heights. Carefully slide shelves (8) into
place resting on shelf support pins (I).

Secure back panels (11) using plastic wedges (S) and screws (R).
Completed stand assembly. The following steps show the assembly and attachment of the TV mount.

Slide mounting bars (c) onto lateral support bar (b). Secure mounting bars (c) by screwing adjustment knobs
(g) into place.
Attach lateral support bar (b) to upright support bar (a) using bolts (e) and washers (f). Attach support brackets
(d) to upright support bar (a) using bolts (e) and washers (f).

Attach TV mount to stand assembly using bolts (e) and washers (f). Tighten bolts (e) with wrench (h).